DOI QR코드

DOI QR Code

Effect of moisture and drying time on the bond strength of the one-step self-etching adhesive system

  • Lee, Yoon (Department of Conservative Dentistry, Yonsei University Wonju College of Medicine) ;
  • Park, Jeong-Won (Department of Conservative Dentistry, Yonsei University College of Dentistry)
  • 투고 : 2012.04.24
  • 심사 : 2012.07.09
  • 발행 : 2012.08.31

초록

Objectives: To investigate the effect of dentin moisture degree and air-drying time on dentin-bond strength of two different one-step self-etching adhesive systems. Materials and Methods: Twenty-four human third molars were used for microtensile bond strength testing of G-Bond and Clearfil $S^3$ Bond. The dentin surface was either blot-dried or air-dried before applying these adhesive agents. After application of the adhesive agent, three different air drying times were evaluated: 1, 5, and 10 sec. Composite resin was build up to 4 mm thickness and light cured for 40 sec with 2 separate layers. Then the tooth was sectioned and trimmed to measure the microtensile bond strength using a universal testing machine. The measured bond strengths were analyzed with three-way ANOVA and regression analysis was done (p = 0.05). Results: All three factors, materials, dentin wetness and air drying time, showed significant effect on the microtensile bond strength. Clearfil $S^3$ Bond, dry dentin surface and 10 sec air drying time showed higher bond strength. Conclusions: Within the limitation of this experiment, air drying time after the application of the one-step self-etching adhesive agent was the most significant factor affecting the bond strength, followed by the material difference and dentin moisture before applying the adhesive agent.

키워드

참고문헌

  1. Frankenberger R, Krämer N, Petschelt A. Technique sensitivity of dentin bonding: effect of application mistakes on bond strength and marginal adaptation. Oper Dent 2000;25:324-330.
  2. Soderholm KJ, Soares F, Argumosa M, Loveland C, Bimstein E, Guelmann M. Shear bond strength of one etchand- rinse and five self-etching dental adhesives when used by six operators. Acta Odontol Scand 2008;66:243-249
  3. Perdigao J. New developments in dental adhesion. Dent Clin North Am 2007;51:333-357.
  4. Van Landuyt KL, Mine A, De Munck J, Jaecques S, Peumans M, Lambrechts P, Van Meerbeek B. Are onestep adhesives easier to use and better performing? Multifactorial assessment of contemporary one-step self-etching adhesives. J Adhes Dent 2009;11:175-190.
  5. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003;28:215-235.
  6. Yiu CK, Hiraishi N, King NM, Tay FR. Effect of dentinal surface preparation on bond strength of self-etching adhesives. J Adhes Dent 2008;10:173-182.
  7. Kitayama S, Nikaido T, Ikeda M, Foxton RM, Tagami J. Enamel bonding of self-etch and phosphoric acidetch orthodontic adhesive systems. Dent Mater J 2007;26:135-143.
  8. Chiba Y, Rikuta A, Yasuda G, Yamamoto A, Takamizawa T, Kurokawa H, Ando S, Miyazaki M. Influence of moisture conditions on dentin bond strength of single-step selfetch adhesive systems. J Oral Sci 2006;48:131-137.
  9. Di Hipólito V, de Goes MF, Carrilho MR, Chan DC, Daronch M, Sinhoreti MA. SEM evaluation of contemporary self-etching primers applied to ground and unground enamel. J Adhes Dent 2005;7:203-211.
  10. Jin MU, Kim YK, Park JW. The influence of moisture control on bond strength of composite resin treated with self-etching adhesive system. J Korean Acad of Conserv Dent 2002;27:363-369.
  11. Werner JF, Tani C. Effect of relative humidity on bond strength of self-etching adhesives to dentin. J Adhes Dent 2002;4:277-282.
  12. Nakaoki Y, Sasakawa W, Horiuchi S, Nagano F, Ikeda T, Tanaka T, Inoue S, Uno S, Sano H, Sidhu SK. Effect of double-application of all-in-one adhesives on dentin bonding. J Dent 2005;33:765-772.
  13. Jacobsen T, Finger WJ, Kanehira M. Air-drying time of self-etching adhesives vs adhesive efficacy. J Adhes Dent 2006;8:387-392.
  14. Chiba Y, Yamaguchi K, Miyazaki M, Tsubota K, Takamizawa T, Moore BK. Effect of air-drying time of single-application self-etch adhesives on dentin bond strength. Oper Dent 2006;31:233-239.
  15. Van Landuyt KL, Snauwaert J, De Munck J, Coutinho E, Poitevin A, Yoshida Y, Suzuki K, Lambrechts P, Van Meerbeek B. Origin of interfacial droplets with one-step adhesives. J Dent Res 2007;86:739-744.
  16. Hiraishi N, Breschi L, Prati C, Ferrari M, Tagami J, King NM. Technique sensitivity associated with air-drying of HEMA-free, single-bottle, one-step self-etch adhesives. Dent Mater 2007;23:498-505.
  17. Van Landuyt KL, Snauwaert J, Peumans M, De Munck J, Lambrechts P, Van Meerbeek B. The role of HEMA in one-step self-etch adhesives. Dent Mater 2008;24:1412- 1419.
  18. Tay FR, Gwinnett JA, Wei SH. Micromorphological spectrum from overdrying to overwetting acidconditioned dentin in water-free acetone-based, singlebottle primer/adhesives. Dent Mater 1996;12:236-244.
  19. Tsuchimoto Y, Yoshida Y, Mine A, Nakamura M, Nishiyama N, Van Meerbeek B, Suzuki K, Kuboki T. Effect of 4-MET- and 10-MDP-based primers on resin adhesive to titanium. Dent Mater J 2006;25:120-124.

피인용 문헌

  1. Bonding effectiveness of different dentin conditions on etch-and-rinse mode of two universal adhesives: the confocal laser scanning and shear bond strength vol.31, pp.9, 2017, https://doi.org/10.1080/01694243.2016.1235079
  2. Effect of different air-drying time on the microleakage of single-step self-etch adhesives vol.38, pp.2, 2013, https://doi.org/10.5395/rde.2013.38.2.73
  3. The effect of curing mode of dual-cure resin cements on bonding performance of universal adhesives to enamel, dentin and various restorative materials vol.40, pp.2, 2012, https://doi.org/10.4012/dmj.2020-077