• Journal of Adhesion and Interface
• /
• v.11 no.4
• /
• pp.137-143
• /
• 2010

Glass beads (GBs) were modified via plasma polymerization coatings in order to enhance the adsorption of polycyclic aromatic hydrocarbons (PAHs) in cigarette smoke and activated carbons (ACs) were also utilized for comparative purposes. First, GBs and ACs were subjected to surface modification via plasma polymerization coating of acrylic acid, acrylonitrile, 1,3-diaminopropane, thiophene or dimethylphosphite with a RF plasma (13.56 MHz) generator. Next, their adsorption behavior was evaluated with a home-made 4-port smoking machine by collecting the total particulate matters (TPMs) on a Cambridge filter pad, followed by the separation of PAHs via solid phase extraction and analysis with GC/MS. Finally, the plasma polymerization coatings were analyzed by FT-IR/ATR to elucidate the adsorption mechanism, while the topology of the modified GBs and ACs were studied by FE-SEM.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.112-119
• /
• 2010

Recently, as the matters of environmental pollution, the energy exhaustion and alternative energy source have become more important issues, around industrial countries and the effort to improve fuel consumption is progressed continuously for decrease of air pollution. In an effort to improve fuel consumption for passenger cars, the study of DLC (Diamond Like Carbon) coating which is widely known to good wear characteristics come to the forefront. Therefore, in present study, it was investigated to the influence of DLC coating layer for wear characteristics with the piston ring material and then suggested to the development process for advanced automotive engine parts that showed improved wear characteristics. From these results, Finally, it will be contributed to improve the fuel consumption for passenger vehicles.

• Journal of Environmental Health Sciences
• /
• v.1 no.1
• /
• pp.32-35
• /
• 1974

Acidic substances contained in asphalt are affect upon emulsitiability of asphalt and its adhesion with aggregates, and therfore, detemination of acidity of asphalt is of important one. However, there has not been established a method of precisely determining the acidity of asphalt. This paper reports on an improved color-indicator titration method, by which the acid number of asphalt is determined. By treating benzene solution of asphalt with alcohol, acidic constituents were selectively extracted into alcohol solution, while asphaltic matters precipitated. A color-indicator titration method then was applied to the resultant faint-colored solution. The change of color at end point was clearly observed, and the results were obtained with good reproductivity and checked well with the results by the I.P. 177/64 method. Alcohols having not more than three cabon atoms have been found suitable for extraction.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.959-970
• /
• 2000

A laboratory-scale experiment was conducted to investigate the effect of soluble microbial products(SMP) on permeate flux in the submerged membrane separation activated sludge process. Continuous and batch filtration test were operated to understand mechanism of relationship between membrane fouling and SMP. Synthetic wastewater(phenol) was used as a carbon source. Hydraulic retention time(HRT) and mixed-liquor volatile suspended solids(MLVSS) of the reactor were kept at 12 hours and 9.000mg VSS/L, respectively. Batch filtration tests ($J_{60}/J_o$) using the mixed liquor from reactor showed that the increase of accumulated SMP concentration in the reactor caused to the decreasing permeate flux and the increasing of the adhesion matters which form cake and gel layer. The resistance value of cake layer was measured $2.9{\times}10^{10}{\sim}4.0{\times}10^{10}(1/m)$, this value showed more significant effect on flux drop than that of among other resistance layers. Batch phenol-degradation experiment was conducted to observe SMP type expected $SMP_{nd}$ and $SMP_{e}$ (SMP resulted from endogenous cell decomposition), these are non-biodegradable high molecular weight organic matter and playa significant role in permeate flux drop. Also, SMP concentration was accumulated as increased of HRT against flux drop.

• Journal of Life Science
• /
• v.17 no.3 s.83
• /
• pp.396-401
• /
• 2007

This research investigated whether exposure of diesel exhaust particulate (DEP) and particulate metter (PM) effect on intercellular. adhesion molecule-1 (ICAM-1) and vascular cell adhesion molecule-1 (VCAM-1) expression in asthma-induced Balb/c and IL-10 knock out (KO) mouse. Mouse was sensitized with intraperitoneal injection with ovalbumin, followed by challenges with intranasal ovalbumin. After induction of asthma mouse placed in the inhalation chamber and exposed to DEP and PM (10 $mg/m^3$). The evidences of pulmonary inflammation were assessed by immunohistochemical stain and westen blot against ICAM-1 and VCAM-1 in the lung tissue. In the immunohistochemical stain, positive reactions for ICAM-1 and VCAM-1 were much stronger in asthma-induced groups and asthma-induced group with DEP or PM than control groups. Although mild positive reactions were appeared in asthma-induced IL-10 KO mice groups, positive reactions were very strong in the asthma-induced group with DEP or PM. In Western blot, expression of VCAM-1 was increased in asthma-induced group with DEP or PM than asthma-induced groups. In the IL-10 KO mouse, ICAM-1 and VCAM-1 expression were increased in asthma-induced group with DEP or PM than asthma-induced groups. DEP and PM exposure have additive effects on the aggravation of inflammatory signs in the asthma-induced murine model. These results suggest that inhalation of DEP and PM in asthmatic patients may aggravate clinical symptoms.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.319-327
• /
• 2020

Particulate matters (PM) are small particulate pollution that decrease the function of skin barrier, which causes inflammatory skin diseases and extrinsic aging. In this study, we evaluated the effect of preventing the adherence of PMs from several cosmetic products applied to human skin using iron oxide black. The PM floating chamber consists of skin exposure area, PM inlet, floating power device, and an outlet so that PM can be naturally attached to the skin while floating in the chamber. The change in skin brightness according to the floating concentration of alternative fine dust was checked to confirm the optimal floating concentration conditions. The intensity difference (before-after intensity, Δ) before and after adhesion of iron oxide black was proportional to the amount of PM adhered. The anti-adherence effect of iron oxide black on five cosmetic products were evaluated through 20 each subjects by comparing the amount of iron oxide black adhered on the control and treatment. The difference in brightness before and after the iron oxide black attached to the skin was calculated and compared with the control group(p < 0.05). When over 150 mg of iron oxide black was adhered on the skin, the interference of intensity was low and clearly showed the skin adhered pattern. According to the application of the five cosmetics, the intensity difference was significantly lower than the control group. This means that depending on the product, it prevented the attachment of iron oxide black. This study is a safe and useful method to confirm the prevention of PM skin adherence. In conclusion, cosmetics can prevent the adherence of PM on the skin according to the formulation or ingredients characteristics.