• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.125-128
• /
• 2007

The problem of water leakage due to damaging waterproof in concrete structure, causes the impediment in a long term and shortened the life span of durability. There are a lot of techniques for repair and reinforcement to improve using environment. However, the improper construction which is unconsidered various environmental conditions, could effect to increase the maintenance expenses. Therefore, this study will be compared and estimated the adhesion liquid and sheet integrate waterproofing material, as analyzing the existing problem. For those result, we would like to arrange the alterative plan for the long durability and user needs of concrete structure.

• 접착 및 계면
• /
• 제24권2호
• /
• pp.41-53
• /
• 2023

형태가변형 전자 소자는 늘림, 굽힘 등 기계적으로 변형된 상태에서도 초기 소자 특성이 유지되는 소자를 말한다. 형태가변형 전자 소자에 적용되는 여러 전도성 소재 중 갈륨 기반 액체 금속은 상온에서 액체 상태로 존재하며 우수한 형태가변성과 전기 전도성, 낮은 인체유해성으로 인해 최근 다양한 형태가변형 전자 소자에 적용되고 있다. 본 고에서는 최근 보고된 여러 연구들을 중심으로 갈륨 기반 액체 금속을 소개하고 이를 활용한 다양한 형태가변형 전자 소자 및 제조 공정에 대해 논하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.317-317
• /
• 2006

This study is about Sealant for LCD panel which used m manufacture of liquid crystal display device with LC dropping method, with the least contamination of liquid crystals, the best adhesion of glass and Improvement of photoreaction for shaded area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.232-235
• /
• 2002

Recently developed liquid silicone rubber (LSR) can be cured by platinum catalyzed additional hydrosilylation mechanism and has the advantage of no byproduct compared to traditional millable peroxide curing silicone rubber. We investigated the characteristics of dielectric breakdown of silicone rubber and adhesion properties between semi-conductive LSR and insulating LSR for high voltage application of pre-molded joint (PMJ). In order to understand the dielectric breakdown characteristics, we used the sheet samples and the paired type rogowski insert electrode system. The breakdown strength and adhesion strength of LSR (E-3) were superior to those of several silicone rubbers. Adhesion strength could be improved by curing at high temperature without post-curing process or enhanced by post-curing process. When LSR (E-3) was cured at $(150^{\circ}C{\times}10min$ semi-conductive )${\times}$ ($175^{\circ}C{\times}10min$ insulation), it showed the high breakdown strength with low standard deviation, and good adhesion strength. In this results, we could apply this process to the fabrication of PMJ without post-curing.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.218-219
• /
• 2014

The purpose of this study is to develop eco-friendly internal material of acrylic emulsion mortars using light-weight aggregate carrier which contains pyroligneous liquid. Four types of light-weight aggregates (vermiculite, perlite, charcoal, zeolite) that are widely used in building materials are selected and the properties such as adhesion, water absorption coefficient, antibiosis, crack and impact resistance are evaluated in accordance with KS F 4715. As a result, the properties of acrylic emulsion mortars using light-weight aggregate carrier are satisfied with KS requirements. The antibiosis is improved with increasing zeolite light-weight carrier content.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.49-52
• /
• 2005

In the development of a propellant tank using liquid oxygen and liquid hydrogen, the improvement of microcrack resistance of carbon/epoxy composites is necessary for the application of a composite material to tank structures. In this research, two types of carbon/epoxy composites with different matrix systems were tested to measure interlaminar shear strength (ILSS), one of the material properties to evaluate fiber-matrix interface adhesion indirectly. Short beam specimens were tested inside an environmental chamber at room temperature(RT) and at cryogenic temperature( - 150 $^{\circ}C$) respectively. Results showed that the matrix system with large amount of bisphenol-A and CTBN modified rubber had good performance at cryogenic temperature.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.138-146
• /
• 2002

The new type of vibration reduction material far an automotive interior, which is spray-type liquid material, is developed in this study The new material has better damping property and lower mass density than other damping materials, for example asphalt sheet. It can be sprayed by an automatic robot, so it is expected to improve productivity and cut down manpower. And it solves a poor adhesion problem and makes an automotive to be lightweight by optimizing spray process. So, It is a next generation automotive vibration reduction material. In this paper, the chemical process for making the new damping materials is described. And then, the damping properties of the vibration reduction materials are analyzed by modal testing of damping treatment specimens. The new vibration reduction materials have good damping properties than asphalt sheet in the experimental results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.145-146
• /
• 2022

The demand for a construction method capable of securing a safety environment and improving quality is increasing. There is a high risk of falling when working at a high place in an environment where it is difficult to secure visibility, such as an underground space, and there is a risk of falling if cement liquid waterproof materials are transferred to the top of the scaffold by manpower. In addition, when working on a high place in a poor environment, the quality uniformity of the upper part of the wall is deteriorated. In addition, as waterproof technicians gradually age and decrease, it is difficult to secure them, so it is urgent to prepare countermeasures against the shortage of waterproof technicians. Therefore, the purpose of this study is to develop cement liquid waterproof spouting construction equipment that can secure uniform quality of construction areas to prevent accidents and ensure safety of workers, improve work efficiency and quality due to improvement of work environment. The adhesion performance of the cement liquid waterproof material could be improved by about 20% in accordance with the use of the equipment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1265-1270
• /
• 2007

Conventional methods for fabricating three-dimensional (3-D) scaffolds have substantial limitations. In this paper, we present 3-D scaffolds that can be made repeatedly with the same dimensions using a microstereolithography system. This system allows the fabrication of a pre-designed internal structure, such as pore size and porosity, by stacking photopolymerized materials. The scaffolds must be manufactured in a material that is biocompatible and biodegradable. In this regard, we synthesized liquid photocurable biodegradable TMC/TMP, followed by acrylation at terminal ends. And also, solidification properties of TMC/TMP polymer are to be obtained through experiments. Cell adhesion to scaffolds significantly affects tissue regeneration. As a typical example, we seeded chondrocytes on two types of 3-D scaffold and compared the adhesion results. Based on these results, the scaffold geometry is one of the most important factors in chondrocyte adhesion. These 3-D scaffolds could be key factors for studying cell behavior in complex environments and eventually lead to the optimum design of scaffolds for the regeneration of various tissues, such as cartilage and bone.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.49-54
• /
• 2020

신축/유연한 전극을 무언가에 접착하거나 전극에 무언가를 접착하기 위해서는 전극의 특성에 맞는 전도성 접착제가 필요하다. 전도성 접착제는 접착성과 전도성이 필수적으로 요구된다. 특히 접착성 부분은 내구성과 내열성이 요구되며 기존 접착제와 다르게 전도성까지 보유해야한다. 그러기 위해서는 강도와 접착성이 좋은 에폭시를 접착제로 선정하였고 여기에 기존 주제와 경화제로 이루어진 2액형 소재가 아닌 가소제와 보강제까지 혼합하여 4액형 소재를 사용하여 신축/유연성을 고분자에 부여하였다. 전도성 필러는 비저항이 낮은 재료인 은으로 선정하였고 높은 전도성을 위해 3가지 모양의 Ag 입자를 사용해 패킹성을 높였다. 이렇게 개발된 전도성 접착제와 실제 판매되고 있는 에폭시 기반 전도성 접착제 2개와 전도성을 비교하였고 실제 판매되고 있는 제품보다 약 10배정도의 우수한 전도성 결과가 도출되었다. 그리고 가소제와 보강제 여부에 따른 전도성, 기계적 특성, 접착력, 강도를 평가하였다. 또한 120℃에서 5분 경화 후에 60%의 인장에도 문제가 없었으며 연필경도는 6H로 우수하게 측정되었다. 3M tape test를 통해 전극의 접착력을 확인한 결과 바인더의 배합 비율에 관계없이 모두 우수한 결과를 보였다. 전극 위에 Cu sheet를 전도성 접착제를 통해 부착시킨 후 접촉저항을 확인한 결과 0.3 Ω으로 우수한 성능을 보였다.