• 마이크로전자및패키징학회지
• /
• 제30권2호
• /
• pp.33-42
• /
• 2023

전기자동차 산업은 전 세계적 환경규제 정책과 더불어 각 국 정부의 지원이 맞물려 성장이 가속화 되고 있다. 따라서 전기자동차용 배터리에 대한 수요는 지속적으로 증가할 것으로 예상된다. 전기자동차 배터리 시스템은 다수의 배터리 셀 및 모듈을 전기적으로 연결시켜 하나의 배터리 팩으로 적용된다. 이러한 배터리 셀 및 모듈을 접합하는 기술은 성능, 용량 및 안정성에 직접적인 영향을 주기 때문에 매우 중요하다. 따라서 기계적, 전기적 특성 등 여러 기준들을 고려하여 견고하게 조립되어야 한다. 각각의 접합 기술은 서로 다른 장점과 한계를 가지고 있으며, 배터리 셀에 적용할 때에는 몇 가지 기준이 고려되어야 한다. 본 논문에서는 다양한 배터리 셀 형태에 따른 접합기술의 적용 현황을 조사하고, 저항 용접 및 레이저, 초음파 등 대표적 접합기술에 대한 특징과 장단점을 제공하고자 한다.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.10-20
• /
• 2022

Recently, metal additive manufacturing (AM) is being investigated as a new manufacturing technology. In metal AM, powder bed fusion (PBF) is a promising technology that can be used to manufacture small and complex metallic components by selectively fusing each powder layer using an energy source such as laser or an electron beam. PBF includes selective laser melting (SLM) and electron beam melting (EBM). SLM uses high power-density laser to melt and fuse metal powders. EBM is similar to SLM but melts metals using an electron beam. When these processes are applied, the mechanical properties and microstructures change due to the many parameters involved. Therefore, this study is conducted to investigate the effects of the parameters on the mechanical properties and microstructures such that the processes can be performed more economically and efficiently.

• 한국인터넷방송통신학회논문지
• /
• 제19권5호
• /
• pp.245-250
• /
• 2019

현대 주조산업에서는 적층제조기술과 같은 신기술을 도입하면서 과거에는 불가능했던 일들의 실현가능성을 보여주고 있다. 이미 해외에서는 적층제조기술을 활용한 중자 생산 및 적용 사례가 심심치 않게 보도되고 있으며, 정부지원 하에 고유 기술들을 개발하고 시장을 확장해 나가고 있다. 반면 국내에서는 고유장비 기술은커녕 적층제조기술의 활용조차 전무한 실정이다. 이러한 상황에서 적층제조기술의 도입과 국산화는 반드시 필요하다. 본 논문의 각 장에서는 여러가지 적층제조기술 중 접착제 분사 기술에 관련된 적층제조장비의 개발 과정에서부터 개발 장비를 활용한 산업용 중자 생산의 내용을 다루고 있으며, 실제 주조 산업의 적용 가능성에 대해서 언급하고 있다.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.111-118
• /
• 2020

The convergence of artificial intelligence with smart factories or smart mechanical systems has been actively studied to maximize the efficiency and safety. Despite the high improvement of artificial neural networks, their application in the manufacturing industry has been difficult due to limitations in obtaining meaningful data from factories or mechanical systems. Accordingly, there have been active studies on manufacturing components with sensor integration allowing them to generate important data from themselves. Additive manufacturing enables the fabrication of a net shaped product with various materials including plastic, metal, or ceramic parts. With the principle of layer-by-layer adhesion of material, there has been active research to utilize this multi-step manufacturing process, such as changing the material at a certain step of adhesion or adding sensor components in the middle of the additive manufacturing process. Particularly for smart parts manufacturing, researchers have attempted to embed sensors or integrated circuit boards within a three-dimensional component during the additive manufacturing process. While most of the sensor embedding additive manufacturing was based on polymer material, there have also been studies on sensor integration within metal or ceramic materials. This study reviews the additive manufacturing technology for sensor integration into plastic, ceramic, and metal materials.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.19-24
• /
• 2017

In these days, increase requirement of TEM (Transmission Electro Microscope) in not only scientific field but also industrial field. Because TEM can measure inner-structure of specimen a variety of materials like metal, bio. etc. When use TEM, specimen should be thin about 50nm. So making for thin specimen, use Ion milling device that include specimen holder. The holder generally made of Aluminium Aluminium holder is worn away easily. For this reason, using time of ion milling with aluminum holder is too short. To solve the problem, we replace aluminium holer to molybdenum alloy holder. In this paper, we design molybdenum alloy holer for CAM and modify CAD modeling for effective machining process. So we array a specimen 3 by 4 and setup orientation for one-shot machining process. Next we make a CAM program for machining. we making a decision two machining strategy that chose condition of tool-path method, step-down, step-over. etc. And then conduct machining using CNC milling machining center. To make clear difference between case.1 and case.2, we fixed machining conditions like feed-rate, main spindle rpm, etc. After machining, we confirm the condition of workpiece and analysis the problems case by case. Finally, case.2 work piece that superior than case.1 cutting with WEDM because that method can not ant mechanical effect on workpiece.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.23-29
• /
• 2019

Three-dimensional(3D) printing is a process for producing complex-shaped 3D objects by repeatedly stacking thin layers according to digital information designed in 3D structures. 3D printing can be classified based on the method and material of additive manufacturing process. Among the various 3D printing methods, digital light processing is an additive manufacturing technique which can fabricate complex 3D structures with high accuracy. Recently, there have been many efforts to use ceramic material for an additive manufacturing process. Generally, ceramic material shows low processability due to its high hardness and strength. The introduction of additive manufacturing techniques into the fabrication of ceramics will improve the low processability and enable the fabrication of complex shapes and parts. In this study, we synthesize silica composite material that can be applied to digital light processing. The rheological and photopolymeric properties of the synthesized silica composite are investigated in detail. 3D objects are also successfully produced using the silica composite and digital light processing.

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.363-369
• /
• 2022

AlSi10Mg alloys are being actively studied through additive manufacturing for application in the automobile and aerospace industries because of their excellent mechanical properties. To obtain a consistently high quality product through additive manufacturing, studying the flowability and spreadability of the metal powder is necessary. AlSi10Mg powder easily forms an oxide film on the powder surface and has hydrophilic properties, making it vulnerable to moisture. Therefore, in this study, AlSi10Mg powder was hydrophobically modified through silane surface treatment to improve the flowability and spreadability by reducing the effects of moisture. The improved flowability according to the number of silane surface treatments was confirmed using a Carney flowmeter. In addition, to confirm the effects of improved spreadability, the powder prior to surface treatment and that subjected to surface treatment four times were measured and compared using s self-designed recoating tester. The results of this study confirmed the improved flowability and spreadability based on the modified metal powder from hydrophilic to hydrophobic for obtaining a high-quality additive manufacturing product.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2014

Medical technologies are gaining in importance because of scientific and technical progress in medicine and the increasing average lifetime of people. This has opened up a huge market for medical devices, where complex-shaped metallic parts made from biocompatible materials are in great demand. Today many of these components are already being manufactured by powder metallurgy technologies. This includes mass production of standard products and also customized components. In this paper some aspects related to metal injection molding of Ti and its alloys as well as modifications of microstructure and surface finish were discussed. The process chain of additive manufacturing (AM) was described and the current state of the art of AM processes like Selective Laser Melting and electron beam melting for medical applications was presented.

• 항공우주시스템공학회지
• /
• 제14권5호
• /
• pp.73-82
• /
• 2020

최근 액체로켓엔진 제작을 위해 적층제조 기법이 부상하고 있다. 이 기술은 제작 비용과 시간의 감소와 중량 감소와 같은 성능 증가로 기존의 제작 방법을 혁신할 수 있다. 여기서는 액체로켓엔진 제작과 관련하여 적층제조의 종류, 장단점과 해외 정부 기관의 프로젝트에 관하여 문헌조사를 하였다. 적층제조는 터보펌프나 밸브와 같은 부품이외에도 장점을 극대화할 수 있는 확대 노즐과 재생냉각채널이 있는 연소실에 관하여 보다 많은 기술 개발이 이루어졌으며 이에 관한 내용을 중점적으로 다루었다.

• 벤처혁신연구
• /
• 제2권1호
• /
• pp.1-11
• /
• 2019

다양한 연구기관에서 4차 산업혁명을 이끌 핵심기술로 AI, IoT, Blockchain 등의 기술과 더불어 3D 프린팅 기술을 들고 있다. 3D 프린팅은 전통적인 생산방식인 subtractive manufacturing(SM)과는 대조적으로 additive manufacturing(AM)으로 그 영향력이 매우 커 혁명이라는 용어를 사용하기도 한다. 이에 본 연구에서는 3D 프린팅 산업의 특성을 경제 관점, 생산 관점, 마케팅 관점에서 전통적인 방식과 비교하여 분석하였다. 이후 비즈니스 생태계 구축 측면에서 쟁점을 분석하였다. 끝으로 향후 연구를 위한 아젠더를 제시하였다. 본 연구는 실무적으로는 3D 프린팅을 둘러싼 핵심적인 이슈 파악 및 향후 적용을 위한 단초를 제공하였다. 학문적으로는 기존의 연구 이슈에 대해 쟁점을 정리함으로써 향후 연구를 위한 틀을 제시하였다. 향후 연구에서는 이러한 논의를 토대로 실제 사례를 중심으로 실증적인 분석이 뒷받침될 필요가 있다.