• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.319-326
• /
• 2015

In this paper, a cost-effective single switch multi-channel LED (light emitting diode) driver is proposed. While conventional LED drivers require as many non-isolated DC/DC converters as the number of LED channels, the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simpler structure, with a lower cost and a higher efficiency. Because its power switch can be turned off under the zero current switching condition, it has very desirable advantages such as improved electromagnetic interference characteristics and high efficiency. Moreover, it uses only a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. As a result, the proposed driver exhibits high reliability and is cost effective. To confirm the validity of the proposed driver, a theoretical analysis is performed, and design considerations and experimental results obtained from a prototype that is applicable to a 46" LED-TV are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3366-3383
• /
• 2012

Reliance on the Internet has introduced Voice over Internet Protocol (VoIP) to various security threats. A reliable security protocol and an authentication scheme are thus required to prevent the aforementioned threats. However, an authentication scheme often demands additional cost and effort. Accordingly, a security framework for known participants in VoIP communication is proposed in this paper. The framework is known as Randomness-Optimized Self-Securing (ROSS), which performs authentication automatically throughout the session by optimizing the uniqueness and randomness of the communication itself. Elliptic Curve Diffie-Hellman (ECDH) key exchange and Salsa20 stream cipher are utilized in the framework correspondingly to secure the key agreement and the communication with low computational cost. Human intelligence supports ROSS authentication process to ensure participant authenticity and communication regularity. The results show that with marginal overhead, the proposed framework is able to secure VoIP communication by performing reliable authentication.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.595-596
• /
• 2015

Growing demand for traditional Korean housing, modernized Korean traditional housing (Hanok) was developed as a way of providing Hanok for the public. However, the standard cost data for Hanok has limitations, as it was developed based on single mock-up project actually constructed and verified by another mock-up Hanok. In order to meet these research objectives, daily report composition which is easy-to-use for on-site workers and managers and also easy-to-accumulate standard cost data was developed first. Secondly, access to the system was made easy through a web server. Finally, an automated calculation formula was inserted to allow the last inputted data to be automatically included for adjustment of standard costs. This system was designed from an industry perspective so that any unspecified and nonprofessional users can easily use. For the users, it has an advantage that on-site workers are provided with a daily report system through web server and also they are able to complete such reports through simple input and output without any additional forms.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.637-638
• /
• 2015

There has been growing interests in life-cycle project management in the construction industry. A lot of attention is given to Building Information Modeling (BIM) which stores and uses a variety of construction information for the life cycle of project management. However, due to the additional workload arising from BIM, its expected effects versus its input costs are still under discussion in practice. As an attempt to address this issue, one of previous studies suggested an automated linking process by developing Standard Classification Numbering System (SCNS) and Geometry Breakdown Structure (GBS) to enhance the efficiency of integration process of BIM objects, cost, and schedule. Though SCNS and GBS facilitates identifying all different dataset, making object sets and linking schedule activities still needs to be manually done without having an automated tool. In this context, the purpose of this paper is to develop and validate a fully automated integration system for 3D-objects, cost, and schedule. A prototype system for single family homes (Hanok) was developed and tested in order to verify its efficiency.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.135-145
• /
• 2011

This study was conducted to analyze the cost effectiveness in line with total phosphorus standard enforcement of public sewage treatment facilities. The additional cost for the total phosphorus removal process was calculated to analyze the cost effectiveness of the advanced water purification process. The analysis results showed that the T-P removal by coagulation sedimentation was more efficient than the advanced water purification facilities in terms of facilities investment cost, and if the coagulation filteration was used for T-P removal, the activated carbon process among the advanced water purification techniques was more efficient in terms of facilities investment cost. In this study, the effects of the T-P removal process that will be additionally introduced according to the tightening of the effluent T-P standard were analyzed within a limit. The actual benefits of improved T-P concentration in the water source will provide diverse values, including the leisure water, environment improvement water, eco-system in the water source and industrial water, in addition to the advanced water purification.

• Journal of Power Electronics
• /
• v.7 no.4
• /
• pp.271-277
• /
• 2007

In this paper, an induction motor rotor fault diagnosis system using current signals, which are measured using the axis-transformation method is presented. Inverter-fed motor drives, unlike line-driven motor drives, have stator currents which are rich in harmonics and therefore fault diagnosis using stator current is not trivial. The current signals for rotor fault diagnosis need precise and high resolution information, which means the diagnosis system demands additional hardware such as a low pass filter, high resolution ADC, an encoder and additional hardware. Therefore, the proposed axis-transformation method is expected to contribute to a low cost fault diagnosis system in inverter-fed motor drives without the need for any additional hardware. In order to confirm the validity of the developed algorithms, various experiments for rotor faults are tested and the line current spectrum of each faulty situation, using the Park transformation, is compared with the results obtained from the FFT(Fast Fourier Transform).

• Journal of applied mathematics & informatics
• /
• v.40 no.5_6
• /
• pp.933-947
• /
• 2022

In this research, we presented the type 2 fuzzy transportation problem with additional constraints and solved by our proposed genetic algorithm model, and the results are verified using the softwares, genetic algorithm tool in Matlab and Lingo. The goal of our approach is to minimize the cost in solving a transportation problem with an additional constraint (TPAC) using the genetic algorithm (GA) based type 2 fuzzy parameter. We reduced the type 2 fuzzy set (T₂FS) into a type 1 fuzzy set (T₁FS) using a critical value-based reduction method (CVRM). Also, we use the centroid method (CM) to obtain the corresponding crisp value for this reduced fuzzy set. To achieve the best solution, GA is applied to TPAC in type 2 fuzzy parameters. A real-life situation is considered to illustrate the method.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.209-230
• /
• 2007

This paper analyzed the social cost function of a congestion-prone service system, which is developed from the social cost minimization problem. The analysis focused on the following two issues that have not been explicitly explored in the previous studies: the effect of the heterogeneity of value-of-travel-times among customers on the structure of cost functions; and the structure of the supplier cost function constituting the social cost function. The analysis gave a number of findings that could be summarized as follows. First, the social marginal cost for one unit increase in system output having a certain value-of-travel-time is the sum of the service time cost for that value-of-travel-time and the marginal congestion cost for the average value-of-service-time of all the system outputs. Second, the marginal congestion cost equals the marginal supplier cost of system output under the condition that supplier compensates the customers for the changed service time costs which is incurred by the marginal capacity increase necessary for economically facilitating an additional system output. Third, the compensated marginal cost is the multiple of the marginal capacity cost and the inverse of system utilization ratio, if the service time function is homogeneous of degree zero in its inputs.

• Korean Institute of Interior Design Journal
• /
• v.25 no.1
• /
• pp.93-100
• /
• 2016

Long-life housing means a housing which structural members (Support) such as columns and floor are maintained for a long period of time and the housing can be used for approximately 100 years by replacing components (Infill) such as walls and furniture. The government established "Certification standards of long-life housing construction" on December 24, 2014, requiring the long-life housing certification for construction of apartment houses for over 1,000 households. However, it is necessary to prepare an incentive measure which could be granted to construction related personnel and housing owners due to the effectiveness of such system and recognition that the initial construction cost of long-life housing is high. The purpose of this study is as follows. First, the reasons and necessity of long-life housing cost increase for each construction company, housing owner, infill component manufacturer and designer which are long-life housing related personnel are determined. The direction of incentive grant for supplying long-life housing based on the determined items is established. The result of this study is as follows. First, a special treatment which is higher than the alleviation of construction standards according to the previous ordinance is necessary for construction companies to secure the business feasibility. Also, incentives such as the provision of service space and wide balcony are necessary to improve the preference level of parceling out. Second, financial incentives such as financial support for housing purchase, reduction and exemption of tax (acquisition tax and registration tax), and support of maintenance cost are required for house owners. Third, it is essential to increase opportunities to participate in the market for infill component manufacturers by applying additional points for PQ. Fourth, it is needed to provide compensation for additional human resource and time at the time of designing to designers by preparing the long-life housing design cost standards.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.109-119
• /
• 2004

Rapid prototyping (RP) technologies have been widely used to reduce the lead-time and development cost of new products. $VLM-_{ST}$ process has been developed to overcome the currently developed RP technologies such as a large building time, a high building cost, an additional post-processing and a large apparatus cost. $VLM-_{ST}$ process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. A novel RP process, fully automated $VLM-_{ST}$ process ($VLM-_{ST}$), has been developed to improve building efficiency of the process and the human dependency of the part. The objective of this work is to propose a $VLM-_{ST}$ process and to develop an apparatus for implementation of the process. $VLM-_{ST}$ process and its apparatus have various technical novelties such as two step cutting using a rotating table, an automatic stacking method using two pilot holes and two reference shapes, a concept of automatic unit shape layer (AUSL), and an automatic bonding using the bonding roller and building magazine. In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston, a human head shape and a human bust shape, were fabricated on the apparatus.