• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.31-36
• /
• 2007

The supersonic combustion experiments are carried out using T3 free-piston shock tunnel. Hydrogen Fuel is injected in the cavity parallel with air(or nitrogen fuel) flow. The equivalence ratios in this study are 0.132 and 0.447. Experimental measurements use OH-PLIF near the cavity and pressures in the combustor. For parallel fuel injection case, direct fuel add into cavity leads to increase of cavity pressure. And Flame exists just near the bottom wall for low equivalent ratio. There is no flame in the cavity because of no mixing in it. Compared to the inclined fuel injection, ignition delay length is longer for low equivalence ratio in both case. OH distribution is not a single line but a repeatable fluctuation flame structure by turbulence. Pressure distributions have nothing to do with the fuel injection position.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.1-8
• /
• 1999

We analyze the transmission performance of WDM system based on cascaded optical add/drop multiplexers. The considered factors degrading the performance in this paper include the intra-channel corosstalk caused from space switches and demultiplexers/multiplexers, the amplified spontaneous emission noise, and the extinction ratio. To ensure the power penalty within 1dB, the extinction ration more than 13dB, the switch corosstalk less than 39dB, and the demultiplexer/multiplexer crosstalk less than 20dB are required. Under the assumption of switch corosstalk less than 30dB, performance degradation due to the ASE noise is dominant compared to the crosstalk. With the fixed decision threshold in an optical receiver, the maximum number of cascaded nodes reduces to a half compared to the case of the optimum decision threshold.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.620-627
• /
• 2019

In this study, ignition delay characteristics of various bio aviation fuels (Bio-ADD, Bio-6308, Bio-7720) produced by HEFA process using different raw materials were compared and analyzed. In order to confirm the feasibility of applying bio aviation fuel to actual system, ignition delay characteristics of petroleum-based aviation fuel (Jet A-1) and blended aviation fuel (50:50, v:v) also analyzed. Ignition delay time of each aviation fuel was measured by using CRU, surface tension measurement and GC/MS and GC/FID analysis were performed to interpret the results. As a result, ignition delay time of Jet A-1 was the longest at all temperature because it contains aromatic compounds about 22.8%. The aromatic compounds can produce benzyl radical which is thermally stable and has low reactivity with oxygen during decomposition process. In the case of bio aviation fuels, ignition delay times were measured similarly because the ratio of n-paraffin/iso-paraffin constituting each aviation fuel is similar (about 0.12) and the composition ratio of cycloparaffin also has no difference. In addition, ignition delay times of blended aviation fuels (50:50, v:v) were measured close to the mean value those of each fuel so it was confirmed that it can be applied without any changing or improving of existing system.

• MALSORI
• /
• no.60
• /
• pp.165-180
• /
• 2006

In this paper, we present several confidence measures (CM) for speech recognition systems to evaluate the reliability of recognition results. We propose heuristic CMs such as mean log-likelihood score, N-best word log-likelihood ratio, likelihood sequence fluctuation and likelihood ratio testing(LRT)-based CMs using several types of anti-models. Furthermore, we propose new algorithms to add weighting terms on phone-level log-likelihood ratio to merge word-level log-likelihood ratios. These weighting terms are computed from the distance between acoustic models and knowledge-based phoneme classifications. LRT-based CMs show better performance than heuristic CMs excessively, and LRT-based CMs using phonetic information show that the relative reduction in equal error rate ranges between $8{\sim}13%$ compared to the baseline LRT-based CMs. We use the support vector machine to fuse several CMs and improve the performance of utterance verification. From our experiments, we know that selection of CMs with low correlation is more effective than CMs with high correlation.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.230-237
• /
• 2006

The operational parameters and control strategies of a tertiary wastewater treatment process a biological filtration system were investigated. The biological filtration system consisted of a nitrification filter (Fiter 1) and a polishing filter with anoxic and aerobic parts (Filter 2). SS, T-C-BOD, and T-N in effluent were kept stable at less than 3, 5 mg/L, and 5 mgN/L, respectively, under a HRT in Filter (filter-bed) of 0.37~2.3 h. T-N at the outlet of Filter 2 were about 1~5 mgN/L under the condition of LV of 50~202 m/d. Methanol addition was controlled based on the COD/N ratio or McCarty's equation. Constant COD/N ratio control results in excess addition under large diurnal fluctuation of $NOx^--N$, and McCarty's equation can be used to add appropriate amount of methanol. Control of methanol addition by on-line nitrate measurement, control of aeration by on-line DO measurement, and control of backwashing by head loss measurement are successfully operated. These results proved that this process prove the easy-maintenance and cost-effectively treatment is attainable.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.256-263
• /
• 2011

Recently, curtain wall structure is constructed according to increasing high rise building. Glass is usually used in opening of curtain wall structure and window area ratio is finally increased. Excessive Daylighting and solar radiation by large window area ratio cause discomfort glare and add to cooling load in the case of office that is heavy on lighting and cooling. Therefore, this study suggests to use low transmittance window for solve those problems. Indoor lighting environment and building energy performance were analyzed by increasing transmittance from 10% to 90% and comparing fixed venetian blind. Consequently, the range of transmittance that is possible to daylighting and prevent discomfort glare. Secondary energy consumption is efficient in the case that transmittance is the range of from 20% to 50%, primary energy consumption is nice on from 20% to 40%. If those result put together, the range of window transmittance from 30% to 50% is proper in the office in lighting environment and energy consumption aspects.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.681-693
• /
• 2020

This study sees a critical gap in the previous body of research, which it seeks to fill; the disclosure of the unemployment ratio correlation has only been measured by the level of economic growth. This study is to add investment variables and government expenditure variables that objectively aim to measure the level of effectiveness in handling the unemployment ratio, which is then a measurement of the effectiveness of unemployment. Economic growth is measured by its impact on income inequality through empirical, conceptual relationships as a critical review and economic strategy for the future. The research uses secondary data on Indonesian macro and microeconomics since 2003-2018, then testing uses a quantitative approach to correlation, regression, and scatterplot. The results of this study show correlations between variables, and volatiles on the graphs show a similar trend. In other words, variables are bound together and support each other. The strategy of prioritizing the scale of government expenditure and investment to reach the target is the primary concern, so that the economic cycle can be optimal and equipped to face the possibility of an economic recession in the future. Many factors cause complex income inequality, though investment does not show a correlation to income inequality.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.607-610
• /
• 1998

The major objectives of speech coding include high compression ratio for transmission in the band limited channel, high synthesized speech quality in terms of the intelligibility and the naturalness and fast processing speed. In general, speech coding methods are classified into the following three categories: the wavelform coding, the source coding and the hybird coding. In this paper, we proposed a new waveform coding method using PSOLA(pitch-synchronous overlap add) technique. First, we fixed one basic waveform per pitch and measured the formant similarity between basic and neighbor waveform. Second, if the similairy satisfied threshold values, we compress the neighbor waveform per pitch and then store or transmit. When the comparession is about 45%, we obtained about 4 in MOS.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.203-206
• /
• 2003

Each method for economic evaluation has its own characteristics. Therefore adoption of each of them in evaluation production investment project results in many problems. Hence combination & modification of them are required to perform more accurate evaluation about investment project. This paper discuss evaluation method of investment projects expansion and replacement investment on each line or individual in the production. Generally investment evaluation method has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Taguchi Techniques is presented, which may be effective to the facilities appraisal or improvement. We propose a decision model to incorporates the values assigned by a group of experts on different factors in production. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for reducing production rate in production management.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.15-24
• /
• 2008

The data delivery confirmation method of MIL-STD-188-220C, which is a tactical wireless mobile Ad-Hoc communication protocol, is that a source node requires the end-to-end ack from all destination nodes and the data-link ack from 1-hop neighboring destination nodes and relaying nodes, regardless of the hop distance from a source node to destination nodes. This method has the problem to degrade the whole communication network performance because of excessive data traffic due to the duplicate use of end-to-end ack and data-link ack, and the collision among end-to-end acks on the wireless network in the case of confirming a data delivery within an 1-hop distance. In order to solve this problem, this paper has proposed the method to perform the data delivery confirmation with the improvement of communication network performance through the data traffic reduction by achieving the reliable data delivery confirmation requiring the only data-link ack within an 1-hop distance. The effects of the proposed method are analyzed in the two aspects of the data delivery confirmation delay time and the data delivery confirmation success ratio.