• Journal of the military operations research society of Korea
• /
• v.26 no.2
• /
• pp.39-54
• /
• 2000

This research is carried out solving problem of reduction in the rate of operation for the k-1 tank in order to increase the availability, caused by the delay in supply of k-1 tank repair parts in field operations. In other words, the study aims to find the most suitable requirement estimate pattern for the main repair parts that are used for k-1 tank. This study intends to present the most suitable requirement estimate pattern for k-1 trank repair pats by comparing the results of repair parts consumption data in relation to their pattern created by the programs of the requirement estimate technique(moving average method) currently used in the Army and adaptive exponential smoothing model. The results of this study numerically proved that the adaptive exponential smoothing model is the most appropriate technique in estimating the requirement for k-1 tank repair parts.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.343-353
• /
• 2009

In this paper, a nonlinear controller is proposed for Doubly-Fed Induction Machine (DFIM) drives. The nonlinear controller is designed based on an adaptive backstepping control technique, using a fifth order model of an induction machine in the synchronous d & q axis rotating reference frame, whose d axis coincides with the space voltage vector of the main AC supply, and using the rotor current and stator flux components as state variables. The nonlinear controller can perfectly track the torque reference signal measured in the stator terminals under the condition of unity power factor regulation, in spite of the stator and rotor resistance variations. In order to make the drive system capable of operating in the motoring and generating modes below and above the synchronous speed, two level Space-Vector PWM (SV-PWM) back-to-back voltage source inverters are employed in the rotor circuit. It is confirmed through computer simulation results that the proposed control approach is effective and valid.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.128-132
• /
• 2009

Digital control system for active combustion control of lab-scale combustor equipped with secondary fuel injection is designed. Controllability with adaptive law is revealed with the Cambridge Combustor model and the requirement for control system is derived. The input and output requirements of frequency estimator and fuel supply actuator for the adaptive control law is verified with cold tests. The system can be used as digital based active combustion controller having 150Hz combustion instability.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.65-70
• /
• 2008

A novel fast locking dual-loop integer-N phase locked loop(PLL) with adaptive bandwidth scheme is presented. When the PLL is out-of-lock, bandwidth becomes much wider than 1/10 of channel spacing with the wide bandwidth loop. When the PLL is near in-lock, bandwidth becomes narrower than 1/10 of channel spacing with the narrow bandwidth loop. The proposed PLL is designed based on a $0.35{\mu}m$ CMOS process with a 3.3V supply voltage. Simulation results show the fast look time of $50{\mu}s$ for an 80MHz frequency jump in a 200KHz channel spacing PLL with almost 14 times wider bandwidth than the channel spacing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.268-270
• /
• 2013

According to the development and supply of Wibro technology digital technology is applied in several fields. Digital images are damaged by various noises in the process of transfer and storage; the image restoration is to reduce the influence of the noises on images by removing the noises. To make good image restoration several methods have been proposed but the noise removal property is not satisfactory. Therefore, to effectively remove noises noise decision is made and if it is decided as a noise, the size of mask is enlarged; this is adaptive median filter algorithm that is proposed in this paper. And through simulation the superiority of this algorithm to existing methods has been verified.

• The Journal of Korean Association of Computer Education
• /
• v.9 no.2
• /
• pp.69-78
• /
• 2006

Educational evaluation is not the work to rank learners hierarchically, but the thing to increase the educational effectiveness by solving a learner's problem and improving the education process from the proper evaluation. The conventional evaluation systems have measured a learner's recognition level by dichotomy. Although they support the evaluation depending on a learner's academic ability and supply the feedback for wrong selection, it is insufficient to take out study-motive and give the establishment for a guidance point of learning. In this paper, we propose the web-based individual adaptive testing system in considering partial score for a learner. Our system are effective to estimate the ability of learner by considering partial score in detail and offer an feedback study from the self-diagnosis function for a learning results.

• Journal of electromagnetic engineering and science
• /
• v.15 no.2
• /
• pp.63-75
• /
• 2015

The CMOS power amplifier (PA) is a promising solution for highly-integrated transmitters in a single chip. However, the implementation of PAs using the CMOS process is a major challenge because of the inferior characteristics of CMOS devices. This paper focuses on improvements to the efficiency and linearity of CMOS PAs for modern wireless communication systems incorporating high peak-to-average ratio signals. Additionally, an envelope tracking supply modulator is applied to the CMOS PA for further performance improvement. The first approach is enhancing the efficiency by waveform engineering. In the second approach, linearization using adaptive bias circuit and harmonic control for wideband signals is performed. In the third approach, a CMOS PA with dynamic auxiliary circuits is employed in an optimized envelope tracking (ET) operation. Using the proposed techniques, a fully integrated CMOS ET PA achieves competitive performance, suitable for employment in a real system.

• Journal of Intelligence and Information Systems
• /
• v.9 no.1
• /
• pp.109-123
• /
• 2003

The relationship between suppliers and customers is treated importantly not only in the traditional business-to-business (BtoB) commerce but also in today's Internet environments. On the one hand, most of Internet-based BtoB commerce services like customer-centric e-procurement, supplier-centric e-sales or intermediary-centric e-marketplace focus mainly on the selection of partners according to bidding, auction, etc. This point may result in the problem of overlooking the relationships between suppliers and customers. To overcome this problem in this paper, an intelligent agents-based supply chain operation architecture is proposed and appraised considering the relationship and its adaptation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.29-37
• /
• 2021

It is important to introduce a local adaptive water supply system for upper mountainous regions, which provide a margin of water supply. This can be done through the process of securing a water source, planning for optimal use, and combining it with a water source that can be linked. In particular, in a mountainous region located at the uppermost part of the watershed, an approach should be found to utilize the groundwater discharge supplied through valley water and lateral discharge. This study sought to improve the water supply system using sand dams in drought-prone areas in Chuncheon, in Gangwon Province. Our approach involved virtually installing a sand storage tank under the existing water source to perform modeling in consideration of the current water intake and calculating the amount of water that can be taken from the sand dam. When the sand dam was applied at a size four times larger than the existing water source, it was found that the groundwater drainage increased significantly with changes in water surface slope and hydraulic conductivity.

• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1169-1188
• /
• 2016

Real-time substructuring techniques are currently an advanced experimental method for testing large size specimens in the laboratory. In dynamic substructuring, the whole tested system is split into two linked parts, the part of particular interest or nonlinearity, which is tested physically, and the remanding part which is tested numerically. To achieve near-perfect synchronization of the interface response between the physical specimen and the numerical model, a good controller is needed to compensate for transfer system dynamics, nonlinearities, uncertainties and time-varying parameters within the physical substructures. This paper presents the substructuring approach and control performance of the linear and the adaptive controllers for testing the dynamic characteristics of soil-structure-interaction system (SSI). This is difficult to emulate as an entire system in the laboratory because of the size and power supply limitations of the experimental facilities. A modified linear substructuring controller (MLSC) is proposed to replace the linear substructuring controller (LSC).The MLSC doesn't require the accurate mathematical model of the physical structure that is required by the LSC. The effects of parameter identification errors of physical structure and the shaking table on the control performance of the MLSC are analysed. An adaptive controller was designed to compensate for the errors from the simplification of the physical model in the MLSC, and from parameter identification errors. Comparative simulation and experimental tests were then performed to evaluate the performance of the MLSC and the adaptive controller.