• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.39-44
• /
• 1999

Hydroforming is a forming process enabling circular metal tubes to be produced in complex cross sections along curved axial paths With the availability of advanced machine design and control They offer advantages over stamped sheet metal in lower tooling cost and structural mass The technology is relatively new so that there is no large knowledge base to assist the fundamentals of tube hydroforming technology. The purpose of this paper is found that adaptive bending condition and contact condition for bended part has uniform thickness distribution.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.677-680
• /
• 2000

The technique of reinforcement learning algorithm is extended to solve the multiobjective control problem for uncertain dynamic systems. A multiobjective adaptive critic structure is proposed in order to realize a max-min method in the reinforcement learning process. Also, the proposed reinforcement learning technique is applied to a multiobjective satisfactory fuzzy logic controller design in which fuzzy logic subcontrollers are assumed to be derived from human experts. Some simulation results are given in order to show effectiveness of the proposed method.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.336-341
• /
• 2002

Recent developments in sensor hardware and in advanced software have made it feasible to consider automating some of the most difficult welding operations. This paper describes some techniques used to automate successfully multipass submerged arc welding operations typically used in pressure vessel manufacture, shipbuilding, production of offshore structures and in pipe mills.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.321-327
• /
• 1993

In order to maintain the cutting force at a desired level during peripheral end milling processes in spite of variation of the depth of cut and other machining conditions, a feedrate override. Apaptive Control Constraint (ACC) system are developed. Feedrate override was accomplished by a developed MMC board and PMC interface techniques. Nonlinear model of the cutting process was linearized as an adaptive model with time varying paramrters. Integral type estimators were introduced for on-line identification of cutting and control parameters in peripheral and milling processes. Zero Order Jold (ZOH) type degital control methodology which uses pole-placement concepts was applied for the ACC system. Performance of the developed ACC system was confirmed on the vertical machining center equipped with FANUC OMC for a large amount of experiment

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.653-662
• /
• 1989

Cerebellar Model Arithmetic Controller (CMAC) has been introduced as an adaptive control function generator. CMAC computes control functions referring to a distributed memory table storing functional values rather than by solving equations analytically or numerically. CMAC has a unique mapping structure as a coarse coding and supervisory delta-rule learning property. In this paper, learning aspects and a convergence of the CMAC were investigated. The efficient training algorithms were developed to overcome the limitations caused by the conventional maximum error correction training and to eliminate the accumulated learning error caused by a sequential node training. A nonlinear function generator and a motion generator for a two d.o.f. manipulator were simulated. The efficiency of the various learning algorithms was demonstrated through the cpu time used and the convergence of the rms and maximum errors accumulated during a learning process. A generalization property and a learning effect due to the various gains were simulated. A uniform quantizing method was applied to cope with various ranges of input variables efficiently.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.192-197
• /
• 2007

This paper presents Hybrid PI controller of IPMSM drive using fuzzy adaptive mechanism(FAM) control. In general, PI controller in computer numerically controlled machine process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness, fixed gain PI controller, Hybrid PI controller proposes a new method based self tuning PI controller. Hybrid PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.892-894
• /
• 1995

This paper deals with developmeant and application of coating thickness control system in hot dip galvanizing process. According to the line conditions, such as line speed, strip size and target coating weight, a predictive preset model sets the initial oprating conditions. Referring the zine coating informations from the gauge, mean coating value controller adjusts the chamber pressure and horizontal distance between strip and air knife, while coating deviation controller adjusts the lip gap profile of the air knife. All adaptive gains are interactively calculated by numeric models based on the theoretical analysis. The operating result with this system effectively reduces the coating deviation in transverse direction as well as in longitudinal direction.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.95-103
• /
• 1995

Recently the trends toward reduction in size of industrial products have increased the application of micro drilling. But micro drilling has still much difficulty so that the needs for active control which give adaptation to controller are expanding. In this paper initial cutting condition was determined for some sorkpieces by experiment and GA-based Fuzzy controller was devised by genetic algorithms and fuzzy inference. The fuzzy inference has been applied to the various prob- lems. However the determination of the membership function is one of the difficult problem. So we introduce a genetic algorithms and propose a self-tuning method of fuzzy membership function. Based on this intelligent control, automation of micro drilling was carried out like the cutting process of skilled machinist.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.1107-1109
• /
• 2007

Context-based access control is an emerging approach for modeling adaptive solution, making access control management more flexible and powerful. However, these strategies are inadequate for the increased flexibility and performance that ubiquitous computing environment requires because such systems can not utilize effectively all benefit from this environment. In this paper, we propose a solution based on risk to make use of many context parameters in order to provide good decisions for a safety environment. We design a new model for risk assessment in ubiquitous computing environment and use risk as a key component in decision-making process in our access control model.

• 정보처리학회논문지C
• /
• 제16C권6호
• /
• pp.737-746
• /
• 2009

이동 사용자의 위치 정보를 제공하는 위치인식서비스는 센서네트워크가 제공하는 대표적인 서비스이다. 그동안 이동 사용자의 위치정보를 획득하기 위한 다양한 기법들이 제시되어 왔다. 하지만 대부분의 기법들은 단일 사용자인 경우만 고려하여 연구되어 이를 다중 사용자인 경우로 확장하기에는 문제가 있다. 여러 이동 사용자들이 한 지역에서 동시에 위치인식 작업을 수행하는 경우에 센서노드들이 발생시키는 라디오 주파수나 초음파 등이 서로 간에 간섭을 발생시킬 수 있다. 본 논문에서는 여러 이동 사용자들이 동시 다발적으로 위치확인 작업을 수행하고자 하는 경우에 발생 가능한 간섭을 최소화 하는 적응적 파워 조절에 기반한 위치인식 기법인 APL(Adaptive Power Control based Resource Allocation Technique for Efficient Localization Technique)기법을 제안한다. APL기법은 센서노드가 위치인식 작업을 수행하기 전에 주위에 있는 앵커노드를 선점하여 점유함으로써 노드간의 간섭을 방지한다. 이를 위해 IEEE 802.11에 정의된 RTS(Ready To Send)패킷을 자원 선점을 요청하는데 사용하며 CTS(Clear To Send)패킷을 자원 선점을 확인하는데 사용한다. 반대로 이미 앵커노드가 다른 노드에 의해 선점하여 위치인식 작업을 방해할 가능성이 있는 경우 해당 앵커노드들을 임계영역으로 정의한다. 임계영역 처리를 위한 NTS(Not To Send) 패킷을 새로이 정의하여 노드 간에 간섭이 발생하지 않도록 한다. 추가적으로 거리측정 작업시 앵커노드간 동기화를 위한 STS(Start to Send)패킷을 새로이 정의한다. 최종적으로 센서노드의 전송 파워를 적응적으로 조절하여 작업이 영향을 미치는 영역을 최소화하도록 한다. 실험을 통하여 이동 사용자가 다수일 경우 노드 간에 간섭이 많이 발생함을 보이며 제안하는 APL기법이 위치인식 작업시 간섭을 방지함을 보인다.