• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.8 s.338
• /
• pp.17-24
• /
• 2005

This paper proposes a Decision Feedback Equalizer (DFT) with an error feedback filter for blind channel equalization. The proposed equalizer uses Least Mean Square(LMS) Algorithm and Multi-Modulus Algorithm (MMA), and has been designed for 64/256 QAM constellations. The existing MMA equalizer uses either two transversal filters or feedforward and feedback filers, while the proposed equalizer uses feedforward, feedback and error feedback filters to improve the channel adaptive performance and to reduce the number of taps. The proposed equalizer has been simulated using the $SPW^{TM}$ tool and it shows performance improvement. It has been modeled by VHDL and logic synthesis has been performed using the $0.25\;\mu m$ Faraday CMOS standard cell library. The total number of gates is about 190,000 gates. The proposed equalizer operates at 15 MHz. In addition, FPGA vertification has been performed using FPGA emulation board.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.127-133
• /
• 2012

In this paper, the concerned CMA (Constant Modulus Algorithm) adaptive equalizer convergence rate and residual inter-symbol interference using cost function in order to improved to the ACMA (Advanced CMA). The CMA method compensates amplitude but does not compensate phase. On the other hand, The RCA (Reduced Constellation Algorithm) method compensates both the amplitude and the phase but it has the convergence rate problem. MCMA method is a way to solve the phase problem of CMA method compensates both the amplitude and the phase after respectively calculating the real and imaginary components. But it is more than poor CMA method in the complexity of hardware and the compensation performance. The cost function can advantages by improving the CMA and a MCMA (Modified CMA) equalizer so that the amplitude and phase retrieval the equalization steady-state to reduce the error by using ISI and faster convergence rate and performance is good SER (Symbol Error Ratio) was confirmed by computer simulations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.77-82
• /
• 2018

This paper is concerned with the performance analysis of a modified stop-and-go generalized multi-modulus algorithm (MSAG-GMMA) adaptive blind equalization algorithm with variable step size. The proposed algorithm multiplies the fixed step size by the error signal of the decision-oriented algorithm in the equalization coefficient update equation, and changes the step size according to the error size. Also, the MSAG-GMMA having a fixed step size is operated so as to maintain a fast convergence speed from a certain threshold to a steady state by determining the error signal size of the decision-directed algorithm, and when the MSAG-GMMA to work To evaluate the performance of the proposed algorithm, we use the ensemble ISI, ensemble-averaged MSE, and equalized constellation obtained from the output of the equalizer as the performance index. Simulation results show that the proposed algorithm has faster convergence speeds than MMA, GMMA, and MSAG-GMMA and has a small residual error in steady state.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.709-717
• /
• 2002

A new multi constant modulus algorithm (MCMA) for a blind decision feedback equalizer is proposed. In order to avoid the error propagation problem in the conventional DFE structure, Feed-Back Filter coefficients are updated only after Feed-Forward Filter coefficients are sufficiently converged to the steady state. Therefore, it has the problem of slow convergence speed characteristics. To overcome this drawback, the proposed MCMA algorithm uses not only new cost function considering the minimum distance between the received signal and the representative value containing the statistical characteristics of the transmitted signal, but also adaptive step-size according to the equalizer outputs to fast convergence speed of FBF. Simulations were carried out under the certified communication channel environment to evaluate a performance of the proposed equalizer. The simulation results show that the proposed equalizer has an improved convergence and SER performance compared with previous methods. The proposed techniques offer the possibility of practical equalization for cable modem and terrestrial HDTV broadcast (using 8-VSB or 64-QAM) applications.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.7 no.1
• /
• pp.15-22
• /
• 2007

The third generation mobile communications system requiring the reliable multimedia data transmission has provided with the reliable voice, data and video services over the variable propagation environment. However the broadband wireless multiple access technologies cause Inter Symbol Interference(ISI) or Multiple Access Interference(MAI) to degrade the performance of CDMA(Code Division Multiple Access) system. Constant Modulus Algorithm which is frequently used as the adaptive blind equalizers to remove the interfering signal has ill-convergence phenomenon without proper initialization. In this paper, new blind equalization method based on conventional CMA is proposed to improve the channel efficiency, and through computer simulation this is tested over the time varying fading environment of mobile communication system. consequently, new blind equalization method into concatenated Kalman filter with CMA is verified better than conventional CMA through adopting minimum mean square errors and eye- pattern obtained from algorithm are compared.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.107-112
• /
• 2016

This paper proposes the improving the equalization performance using the variable step size in the S-MMA (Sliced-Multi Modulus Algorithm) equalization algorithm in order to minimize the effect of intersymbol interference which occurs at the nonlinear transfer function of communication channel. The S-MMA were showned for the improving the steady state equalization performance and misadjustment compared to the MMA present algorithm, this two algorithm has a limitation of performance improvement due to the adapting the fixed step size according to the error signal amplitude. In order to solving the abovemensioned problem, the proposed algorithm was adopting the variable step size proportional to the error signal amplitude and the computer simulation was performed for showing the performance improving. As a result of simulation, the proposed VSS S-MMA algorithm has more superior equalization performance compared to the present S-MMA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.67-72
• /
• 2021

This paper compare the adative equalization performance of the DSE-MMA (Dithered Signed-Error MMA) and QE-MMA (Quantized-Error MMA) which has a simplifies the computational operation of currently used MMA algorithm. The DSE-MMA possible to improve the rubustness to noise by using the dithered signal consider the polarity of error signal in the multiplication part. In QE-MMA, it use the polarity of error signal after performing the nonlinear power-of-two quantizing operation for easiness of H/W implementation. The same channel environment was applied, and it's performance of the output signal constellation, the residual isi and maximum distortion and MSE that means the convergence characteristics, the SER that means the robustness of external noise of algorithm were compared and evaluated. As a result of computer simulation, the QE-MMA has more good in constellation, residual isi, maximum distortion, MSE performanc than DSE-MMA. In SER, the DSE-MMA has more robust due to dither signal than QE-MMA.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.19-26
• /
• 2013

This paper deals with the performance comparison of blind adaptive equalization algorithm, the MMA and S-MMA, that is used for compensation of the amplitude and phase distortion simultaneously which occurs in the time dispersive channel. The present CMA algorithm is possible to compensates the amplitude only, but not in phase, so it needs to the another additional circuit for compensating the phase. In order to overcoming the abovemensioned shorthand, the improved cost function is applied to the MMA algorithm. In MMA algorithm, the error is consists of the dispersion constant only, but in S-MMA, the error is consists of the dispersion constant considering the output of decision device (sliced symbol) in order to updating the tap coefficients. By using the two kind error signal, the adaptive equalization algorithm has different performance. In this paper, we compare to the adaptive equalization algorithm performance by using the recovered constellation, residual isi, MD (Maximum Distortion) and SER as a index when the transmitting signal is 16 and 64-QAM and then passing through the same communication channel. As a result of simulation, the S-MMA can improving the Roburstness in SER performance compared to the MMA in the high order QAM signal.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.412-418
• /
• 2011

Reliability-based Topology optimization(RBTO) is to get an optimal design satisfying uncertainties of design variables. Although RBTO based on homogenization and density distribution method has been done, RBTO based on BESO has not been reported yet. This study presents a reliability-based topology optimization(RBTO) using bi-directional evolutionary structural optimization(BESO). Topology optimization is formulated as volume minimization problem with probabilistic displacement constraint. Young's modulus, external load and thickness are considered as uncertain variables. In order to compute reliability index, four methods, i.e., RIA, PMA, SLSV and ADL(adaptive-loop), are used. Reliability-based topology optimization design process is conducted to obtain optimal topology satisfying allowable displacement and target reliability index with the above four methods, and then each result is compared with respect to numerical stability and computing time. The results of this study show that the RBTO based on BESO using the four methods can effectively be applied for topology optimization. And it was confirmed that DLSV and ADL had better numerical efficiency than SLSV. ADL and SLSV had better time cost than DLSV. Consequently, ADL method showed the best time efficiency and good numerical stability.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.137-143
• /
• 2010

This paper deals with the performance comparison of self adaptive equalizer by the weighting factor of MCMA cost function for the compensate the amplitude and phase distortion which occurs in the communication channel. The MCMA is improves the cost function of present CMA at the output of equalizer for the minimize of error function in the amplitude and phase, the value of weighting factor is used at this time. When the comparison of equalizer performance, we classified to initial state and steady state, then it represents the convergence time and convergence speed and steady state operation of equalizer to the predetermined level, it is determined by the weighting factor. We confirm to the different result to this 2 state by weighting factor values using computer simulation. By using the result of this paper, if we appropriately choose the weighting factor values in the environment of communication channel, it is expected that the high quality digital transmission is possible.