• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.57-63
• /
• 2007

The systematic method to construct equivalent static load from a given dynamic load is proposed in the present study. Previously reported works to construct equivalent static load were based on ad hoc methods. Due to improper selection of loading position, they may results in unreliable structural design. The present study proposes the employment of primary degrees of freedom for imposing the equivalent static loads. The degrees of freedom are selected by two-level condensation scheme with reliability and efficiency. In several numerical examples, the efficiency and reliability of the proposed scheme is verified by comparison displacement for equivalent static loading and dynamic loading at the critical time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.4
• /
• pp.1337-1358
• /
• 2015

In this paper, we present an analytical and simulated study on the performance of adaptive vehicular ad hoc networks (VANET) priority based on Transmission Distance Reliability Range (TDRR) and data type. VANET topology changes rapidly due to its inherent nature of high mobility nodes and unpredictable environments. Therefore, nodes in VANET must be able to adapt to the ever changing environment and optimize parameters to enhance performance. However, there is a lack of adaptability in the current VANET scheme. Existing VANET IEEE802.11p's Enhanced Distributed Channel Access; EDCA assigns priority solely based on data type. In this paper, we propose a new priority scheme which utilizes Markov model to perform TDRR prediction and assign priorities based on the proposed Markov TDRR Prediction with Enhanced Priority VANET Scheme (MarPVS). Subsequently, we performed an analytical study on MarPVS performance modeling. In particular, considering five different priority levels defined in MarPVS, we derived the probability of successful transmission, the number of low priority messages in back off process and concurrent low priority transmission. Finally, the results are used to derive the average transmission delay for data types defined in MarPVS. Numerical results are provided along with simulation results which confirm the accuracy of the proposed analysis. Simulation results demonstrate that the proposed MarPVS results in lower transmission latency and higher packet success rate in comparison with the default IEEE802.11p scheme and greedy scheduler scheme.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.1-8
• /
• 2019

Recently, consumer distrust has deepened due to blog posts focusing only on public relations due to 'viral marketing'. In addition, marketing projects such as false writing or exaggerated use of the latter phase are one of the most popular programs in 2016 as they are cheaper and more effective than newspaper and TV ads, and the size of advertising costs is set to be a major means of advertising at '3 trillion 394.1 billion won. From this 'viral marketing,' it has become an Internet environment that needs tools to filter information. The fake review filtering application ADDAVICHI presented in this paper extracts, analyzes, and presents blog keywords, total number of searches, reliability and satisfaction when users search for content such as "event" and "taste restaurant." Reliability shows the number of ad posts on a blog, the total number of posts, and satisfaction shows a clean post with confidence divided into positive and negative posts. Finally, the keyword shows a list of the top three words in the review from a positive post. In this way, it helps users interpret information away from advertising.

• Convergence Security Journal
• /
• v.19 no.3
• /
• pp.13-19
• /
• 2019

MANET has many security vulnerabilities because it consists of only mobile nodes using wireless. In particular, it is a very important factor determining network performance that excludes the participation of malicious nodes through accurate reliability measurements and authentication of nodes participating in the network. In this paper, we proposed a technique applied with blockchain technology in order to prevent forgery of authentication information for nodes participating in the network. And, an area-based hierarchical structure was applied to increase the efficiency of authentication for nodes and apply the optimal technique of block generation and exchange protocol. In addition, four data payloads were added to the block header in order to add authentication information for nodes in block. To improve the reliability by applying the blockchain technique to the hop-by-hop data transfer method between mobile nodes, blockchain exchange protocol through transaction creation, block packaging and verification processes were implemented. We performed the comparative experiment with the existing methods to evaluate the performance of the proposed method and confirmed the excellent performance by the experiment results.

• The Journal of Economics, Marketing and Management
• /
• v.6 no.4
• /
• pp.1-16
• /
• 2018

Purpose - This study will investigate and identify the relationship between brand image, brand attitude and intent to purchase based on subjects that have remembered or watched more than one storytelling marketing ad related to airlines. The purpose of the project is to secure market competitiveness by presenting the basis for and use of the marketing strategy using storytelling, which can capture the goodwill of the aerospace competition market in the future. Research, design, data, and methodology - Prior to the research model and hypothesis testing phase, a verification factor analysis was conducted to assess internal consistency among each measurement item and to ensure reliability and validity of the measurement tool. Further, the organization was assessed for validity by calculating the mean variance estimation (AVE) and the construction concept reliability (CCR) through a positive factor analysis. Hypothesis verification was analyzed through a structural equation model, and each concept set in the hypothesis was entered as a potential variable, and each measurement item was entered as an observation variable. Results - Airline's storytelling marketing has a significant impact on the brand image and two emotional and cognitive responses have been shown to influence the brand image. In addition, airline storytelling marketing has a significant impact on brand attitudes and airline storytelling marketing derived from factor analysis has shown two emotional and cognitive responses to brand attitudes. Conclusions - The parts derived based on the research results show that storytelling marketing has a strong influence on the airline's brand image and attitude, and that it is necessary for airlines to have a brand image and attitude. Also, forming a favorable brand image has a significant impact on brand attitudes. We believe that by presenting basic data to the aviation industry in future research on airline storytelling, we will be able to increase understanding and contribution to development of storytelling marketing in aviation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.915-923
• /
• 2008

This paper focuses on optimal tuning of nonlinear parameters of a dual-input power system stabilizer(dual-input PSS), which can improve the system damping performance immediately following a large disturbance. Until recently, various PSS models have developed to bring stability and reliability to power systems, and some of these models are used in industry applications. However, due to non-smooth nonlinearities from the interaction between linear parameters(gains and time constants of linear controllers) and nonlinear parameters(saturation output limits), the output limit parameters cannot be determined by the conventional tuning methods based on linear analysis. Only ad hoc tuning procedures('trial and error' approach) have been used. Therefore, the steepest descent method is applied to implement the optimal tuning of the nonlinear parameters of the dual-input PSS. The gradient required in this optimization technique can be computed from trajectory sensitivities in hybrid system modeling with the differential-algebraic-impulsive-switched(DAIS) structure. The optimal output limits of the dual-input PSS are evaluated by time-domain simulation in both a single machine infinite bus(SMIB) system and a multi-machine power system in comparison with those of a single-input PSS.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.156-162
• /
• 2020

Wireless Sensor Network (WSN) field is mainly studied to monitor and characterize large-scale physical environments to track various environmental or physical conditions, such as temperature, pressure, wind speed and humidity. WSN can be used in various applications such as wild surveillance, military target tracking and monitoring, dangerous environmental exploration and natural disaster relief. We design probabilistic mobile models that apply to mobile ad hoc network mobile environments. A probabilistic shift model proposed by dividing the number of moving nodes and the distance of travel into two categories to express node movement characteristics. The proposed model of movement through simulation was compared with the existing random movement model, ensuring that the width and variation rate of the first node node node node (FND) was stable regardless of the node movement rate. In addition, when the proposed mobile model is applied to the routing protocol, the superiority of network life can be verified from measured FND values. We overcame the limitations of the existing random movement model, showing excellent characteristics in terms of energy efficiency and stable in terms of changes in node movement.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.8
• /
• pp.1133-1138
• /
• 2001

In this paper, we implemented that MMT(Multimedia Terminal) demonstrates spot news, weather forecast, sports news and cultural news employed CDMA mobile communication networks. The MMT displays mobile pictures/joint pictures/on screen ad and to make known Bus stop or Mobile stations. The MMT gives driver's and passenger's safety and valuable information for one's use GPS satellites. We verified to make real time mobile picture transfer use of CDMA2000 1×(IS-95C) network and development the scheduler control each module. This system tested on vehicle that train and bus. MMT was implemented high reliability and stability by the embedded system. The mobile terminal shows reliable data transfer rate about 74Kbps on IS-95C.

• Wind and Structures
• /
• v.11 no.6
• /
• pp.427-440
• /
• 2008

Estimates of wind-induced wind effects on tall buildings are based largely on 1980s technology. Such estimates can vary significantly depending upon the wind engineering laboratory producing them. We describe an efficient database-assisted design (DAD) procedure allowing the realistic estimation of wind-induced internal forces with any mean recurrence interval in any individual member. The procedure makes use of (a) time series of directional aerodynamic pressures recorded simultaneously at typically hundreds of ports on the building surface, (b) directional wind climatological data, (c) micrometeorological modeling of ratios between wind speeds in open exposure and mean wind speeds at the top of the building, (d) a physically and probabilistically realistic aerodynamic/climatological interfacing model, and (e) modern computational resources for calculating internal forces and demand-to-capacity ratios for each member being designed. The procedure is applicable to tall buildings not susceptible to aeroelastic effects, and with sufficiently large dimensions to allow placement of the requisite pressure measurement tubes. The paper then addresses the issue of accounting explicitly for uncertainties in the factors that determine wind effects. Unlike for routine structures, for which simplifications inherent in standard provisions are acceptable, for tall buildings these uncertainties need to be considered with care, since over-simplified reliability estimates could defeat the purpose of ad-hoc wind tunnel tests.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.891-900
• /
• 2000

A Visual development framework for embedded system is presented based on virtual prototyping. Embedded systems often are used in life critical situation, where reliability is very important. Time_to_market, correctness, user_friendly_design are another features required for embedded system design. However, embedded systems are today designed with an ad hoc approach that is heavily based on earlier experience with similar products. We believe that new design paradigm is needed and it should be based on the use of formal model and visual system to describe the behavior of the system at a high level abstraction. Virtual prototyping has all the required features. It has the following advantages; correct design, clear interface definition, idea experimentation, increased communication. In this paper, we describe the design and implementation of VIP/Sim(Virtual Prototyping Simulator), a visionary development framework for embedded system design. New feature such as state polymorphism is augmented to the de_facto standard formal language, statechart, for enhanced dynamic modeling. Actual design experience with VIP/Sim is also discussed.