• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.871-877
• /
• 2005

This paper proposes a new modeling scheme to describe the hysteresis between input voltage and displacement of piezoelectric actuators in the inchworm. From the experimental analysis of Piezoelectric actuator behaviors. the hysteresis characteristics including residual displacement can be modeled by second order functions of a maximum Input voltage and preload. Various experiments are performed to demonstrate the effectiveness and validation of the proposed modeling scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.283-283
• /
• 2000

In this paper, we deals with a decentralized control scheme with input compensation form for gantry crane systems. By considering the gantry crane's characteristics, the system is decentralized into two subsystems such as the travelling and sway subsystem, and the hoisting subsystem. For decentralizing the system, a simple algorithm is proposed using observability canonical form. The decentralized subsystems include unknown input which coupled with other subsystems and actuator failures. These unknown input and actuator failures are estimated by using PI observation techniques and those estimated values are used to construct an input compensation form. Lastly, the proposed decentralized control scheme far the gantry crane systems is verified by crane simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.630-637
• /
• 2003

This paper proposes a new modeling scheme to describe the hysteresis and the dynamic characteristics of piezoelectric actuators in the inchworm and develops a control algorithm for the precision motion control. From the analysis of piezoelectric actuator behaviors, the hysteresis can be described by the functions of a maximum input voltage. The dynamic characteristics are also identified by the frequency domain modeling technique based on the experimental data. For the motion control, the hysteresis behavior is compensated by the inverse hysteresis model. The dynamic stiffness of an inchworm is generally low compared to its driving condition, so mechanical vibration may degenerate the motion accuracy of the inchworm. Therefore, the sliding mode control and the Kalman filter are developed for the precision motion control of the inch-warm. To demonstrate the effectiveness of the proposed modeling schemes and control algorithm, experiment validations are performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1704-1707
• /
• 1997

In this work, position and vibratiion control of a two-link manipulator with one flexible link, which an unkoun but bounded payload mass and two pair of artificial muscle-type penumatic actuators, are investgated. A flexible link robot has advantages over a figid link robot in the sense that it is much safer when it cones into contact with its environment, including humans. Furthermore, for the sake of safety, it would be more desirabel if an actuator could deliver required force while maintaining proper compliance. An artificial muscle-type penumatic actuator is adequate for such cases. In this study, a controller based on singular perturbation method, adaptive and sliding mode contro, and .mu.-synthesis is developed. The effectiveness of the proposed control scheme is confirmed through simulations and experiments.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.1-7
• /
• 2014

This paper presents the development of a compact position generator to be used for industrial purposes based on a pump controlled Electro-Hydraulic Actuator (EHA), which is closed-loop controlled by an embedded based Iterative PID controller. The controller is designed by combining the PID controller and the iterative learning scheme to perform tracking control for periodically desired references. Control algorithm is implemented on an embedded computer (AD 7011-EVA) which makes the implementation and application in industrial environments easier.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.232-239
• /
• 1993

The vibration damping of structure is increased by thermal actuator. The thermal actuator causes thermal stress across the section of structure. The several kinds of control theories are proposed and the proposed control theories are successful in increasing vibration damping. This scheme can be effectively applied to large space structure [LSS] having very low natural frequencies.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.8
• /
• pp.1-14
• /
• 1996

Design of a reliable control systems is investigated for a class of uncertain linear plants. The uncertainty considered here is for the ase of uncertainty in the system matrix. A decentralized control scheme with two observer-based feedback controllers is developed, and it is shown that the resulting closed-loop system is reliable in the sense that the control scheme provides guaranteed stability and $H_{\infty}$-norm bounded performance in the event of sensor and/or actuator failures as well as in the presence of parameter uncertainties. We observed that soft-type failures were additional exogenous inputs to the closed-loop system. As a results, the sensor and/or actuator failures can be tolerated in the design, which is achieved by extending the methodology developed in.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.130-130
• /
• 2000

This paper presents a robust fault diagnosis and fault tolerant control lot the actuator and sensor faults in the closed-loop systems affected by unknown inputs or disturbances. The fault diagnostic scheme is based on the residual set generation by using robust Parity space approach. Residual set is evaluated through the threshold test and then fault is isolated according to the decision logic table. Once the fault diagnosis module indicates which actuator or sensor is faulty, the fault magnitude is estimated by using the disturbance-decoupled optimal state estimation and a new additive control law is added to the nominal one to override the fault effect on the system. Simulation results show that the method has definite fault diagnosis and fault tolerant control ability against actuator and sensor faults.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.100-107
• /
• 1997

A pneumatic artificial muscle type of actuator, which acts similar to human muscle, is developed recently. In this paper, an adaptive controller is presented for the trajectory tracking problem of a two-degree- of-freedom manipulator using two pairs of pneumatic artificial muscle actuators. Due to the nonlinearity and the uncertainty on the dynamics of the actuator, it is difficult to make the effective control schemes of this system. By the adaptive control law which inclueds a nonlinear "feedforward" term compensating paramet- ric uncertainties in addition to P.I.D. scheme, both golbal stability of the system and convergence of the tracking error are guaranted. The effectiveness of the proposed control method for the manipulator using this actuator is illustrated through experiments.periments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.687-693
• /
• 1989

A robust deterministic control for a class of singularly perturbed uncertain systems, where uncertainties are characterized deterministically rather than stochastically, is developed based mainly on information available on an uncertain reduced-order system. The deterministic control scheme is applied to the motion control of a n degree of freedom robotic manipulator. The parasitic actuator and sensor dynamics of the manipulator are explicitly considered in the stability analysis of the deterministic controller using a singular perturbation model. Simulation and experimental studies for a two degree of freedom, direct drive SCARA manipulator are conducted to evaluate the effectiveness of the derived control scheme.