• 한국환경보건학회지
• /
• 제2권1호
• /
• pp.25-28
• /
• 1975

The main purpose of the aeration units in activated sludge process is to enable micro-organisms to metabolize the constituents of the waste effectively by supplying sufficient oxygen for their respiration. Normally, aeration is achieved by bringing the mixture of waste and sludge into intimate contact with air. The main type of aeration unit is diffused air unit in which air is injected into the liquid in the form of bubbles. The object of these laboratory studies is to compare the performance of three laboratory scale aeration systems at various depths of submergence, aerating water with and without the addition of a surface active agent.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.74-78
• /
• 2002

Ultra-Precision CNC polishing system including on-machine measurement system, a corrective polishing algorithm is developed. The unit removal profiles for various polishing tools and analyzed and tested and dwell time distributions and residual errors for a target removal shape are calculated. The corrective polishing algorithm is tested with various workpieces. This result will be used for the software development of the CNC polishing system.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.103-106
• /
• 1990

The purpose of this study was to determine if homogeneity of the resin associated with benchcuring could be obtained in the curing unit as the water increased from room temperature to curing temperature. The results of the experiment were as follows : 1. Long periods of bench-curing are not necessary. 2. Bench-curing can take place in the water bath of the curing unit. When this procedure is used, the water should be far enough below the temerature at which active polymerization of the resin proceeds to allow the bench-curing to occur.

• 생명과학회지
• /
• 제12권6호
• /
• pp.688-693
• /
• 2002

Chaperone 분자는 세포 내에서 새로 합성된 polypeptides의 misfolding을 보호하는 역할을 가진다. 이런 chaperone 분자와의 공발현은 활성형 재조합 단백질의 생산을 증가를 기대할 수 있다. 본 연구에서는 E. cozi에서 B. macerans 유래 cyclodextrin glucanotransferase (CGTase)의 활성형 생산에 GroEL/ES chaperone과의 공발현의 효과에 대해 조사하였다. cgt와 groEL/ES 유전자출 발현하는 pTCGT1과 pGro7은 각각 T7 promoter와 araB promoter에 의해 조절되고 이들을 E. coli cell에 co-transformation시켰다. 재조합 E. coli에서 IPTG와 L-arabinose의 최적 농도를 결정하기 위해 행한 결과 1 mM IPTG, 0.3 mg L-arabinose/$m\ell$에서 가장 높은 CGTase 활성을 나타내었다. 그리고 tube에서는 L-arabinose와 IPTG를 각각 0.4~0.5 $OD_{600}$과 0.8~l.0 $OD_{600}$에서 첨가하였을 때 활성형 CGTase의 생산이 증가되었다. GroEL/ES 공발현 조건에서는 가용성 CGTase 활성이 0.7~0.73 unit/$m\ell$로 단독 발현의 0.36~0.56 unit/$m\ell$에 비해 약 1.5 배 정도 증가함을 알 수 있었다. SDS-PAGE 분석에서는 GroEL/ES 공발현 조건에서 총 CGTase의 33.6%정도가 가용성 형태로 생산됨을 알 수 있었다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.509-516
• /
• 2012

This paper describes the testing and experimental characterization of a linear permanent magnet actuator, which is designed and developed for active vehicle suspension, under both static and dynamic conditions. Since the active suspension unit operates over a wide force-velocity range with varying duty ratios, it is essential to establish an effective thermal model which can be used for assessing temperature rise of the actuator under various operating conditions. The temperature rise of the actuator is measured and the results are compared with the prediction by the derived transient thermal model. It is shown that the measured actuator parameters and characteristics are closed to their predicted values. The linear actuator is controlled by a dSPACE system via a three phase inverter and its velocity tracking performance is presented.

• Journal of Microbiology
• /
• 제34권1호
• /
• pp.54-60
• /
• 1996

Taking advantage of the heat inducible HSP82 gene in yeast, chromatin structure after transcription cessation was investigated. Alteration of chromating conformation within the HSP82 gene transcription unit into an active state has been shown to correlate with its transcriptional induction. It was thus of interest to examine whether the active chromatin state within the HSP82 mRNA analysis, the gene ceased its transcription within a few hours of cultivation at a normal condition after heat induction. In this condition, an active chromatin conformation in the HSP82 gene body was changed into an inactie state which was revealed by DNase I resistance and by typical nucleosomal cutting periodicity in the corresponding chromatin. These results thus ruled out the possibility of a long-term maintenance of the DNase I sensitive chromatin after transcription cessation. DNA replication may be a critical event for the chromatin reprogramming.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권5호
• /
• pp.194-198
• /
• 2003

A wide-band E-plane notch phased array antenna having bandwidths of 3:1 and a scan volume of $\pm$ 45 is designed considering the active element pattern (AEP) with analysis of the full structure of E-plane notch phased array antenna. Using the numerical E-plane waveguide simulator as an infinite linear array in the broadside angle, the active reflection coefficient (ARC) of the unit element is optimized in the design frequency range. To evaluate the convergence of the AEP, the simulation of full array as changing the number array is investigated, and the minimum numbers of array that have characteristics similar to the AEP of an infinite array are determined.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1261-1268
• /
• 2001

Effective material properties of active fiber composites with interdigitated electrodes are derived as a function of the fiber volume fraction. For the purpose of applying the rule of mixture, three unit cell models are introduced; each for the deformation and stress continuities in the out of plane and in-plane directions, and the continuity of the electrical displacement in the longitudinal direction. Derived effective material properties are compared with the results by the finite element method; good agreements are observed between them. As an application, the electromechanical behavior of the angle ply laminates with the active fiber layers bonded on the top and bottom surfaces are investigated; the angle of piezoelectric fiber to maximize the twisting curvature is obtained using the present model.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.150-155
• /
• 2011

In an active noise control systems, an IIR filter may cause a problem in stability beacause of its poles. For IIR filter, its poles goes sometimes out of a unit circle in a z-plane in the transition state, where the adaptive algorithm converges to the optimum value, which causes the system to diverge. Fuzzy LMS algorithm has a better convergence property than conventional LMS algorithms, but is not applicable to IIR filter because of the reasons. Stabilized adaptive algorithm could be improves stability by moving the pole of IIR filer toward the origin forcibly in the transient state, and by introducing forgetting factor to maintain the optimum convergence when it reaches to the steady state. In this paper, We proposed stabilized adaptive fuzzy LMS algorithms with IIR filter structures, for single channel active noise control with ill conditioned signal case. Computer simulations were performed to show the effectiveness of a proposed algorithm.

• KIEE International Transactions on Power Engineering
• /
• 제12A권1호
• /
• pp.31-35
• /
• 2002

This paper presents a new operation scheme of UPFC to minimize both generation costs and active power losses in a normal operation state of power system. In a normal operation, cost minimization is a matter of primary concern among operating objectives. This paper considers two kinds of costs, generation costs and transmission losses. The total generation cost of active powers can be minimized by optimal power flow, and active power losses in the transmission system can be also minimized by power flow control of UPFC incorporated with minimization of generation costs. In order to determine amounts of active power reference of each UPFC required for the cost minimization, an iterative optimization algorithm based on the power flow calculation using the decoupled UPFC model is proposed. For verification of the proposed method, intensive studies have been performed on a 3-unit 6-bus system equipped with a UPFC.