• The Plant Pathology Journal
• /
• v.31 no.3
• /
• pp.316-321
• /
• 2015

A small cationic peptide (JH8944) was tested for activity against a number of pathogens of agricultural crops. JH8944 inhibited conidium growth in most of the tested plant pathogens with a dose of $50{\mu}g/ml$, although one isolate of Fusarium oxysporum was inhibited at $5{\mu}g/ml$ of JH8944. Most conidia of Fusarium graminearum were killed within 6 hours of treatment with $50{\mu}g/ml$ of JH8944. Germinating F. graminearum conidia required $238{\mu}g/ml$ of JH8944 for 90% growth inhibition. The peptide did not cause any damage to tissues surrounding maize leaf punctures when tested at a higher concentration of $250{\mu}g/ml$ even after 3 days. Liposomes consisting of phosphatidylglycerol were susceptible to leakage after treatment with 25 and $50{\mu}g/ml$ of JH8944. These experiments suggest this peptide destroys fungal membrane integrity and could be utilized for control of crop fungal pathogens.

• 전자공학회논문지 IE
• /
• v.44 no.3
• /
• pp.12-22
• /
• 2007

In this paper, we designed of the high speed digital neuron processor in order to digital neural networks. we designed of the MAC(Multiplier and Accumulator) operation unit used residue number system without carry propagation for the high speed operation. and we implemented sigmoid active function which make it difficult to design neuron processor. The Designed circuits are descripted by VHDL and synthesized by Compass tools. we designed of MAC operation unit and sigmoid processing unit are proved that it could run time 19.6 nsec on the simulation and decreased to hardware size about 50%, each order. Designed digital neuron processor can be implementation in parallel distributed processing system with desired real time processing, In this paper.

• Preventive Nutrition and Food Science
• /
• v.7 no.4
• /
• pp.417-420
• /
• 2002

A strong fibrin-specific fibrinolytic enzyme was produced from Bacillus subtilis KH-4 isolated from Deonjang, a Korean fermented soybean paste similar to Japanese miso. The addition of glucose as a carbon source resulted in the highest levels of caseinolytic and fibrinolytic activities. Likewise, the addition of yeast extract as the nitrogen source resulted in the highest caseinolytic and fibrinolytic activities (3473.2 unit and 47.4 munit, respectively), It was observed that out of all metal ion sources only calcium (chloride) enhanced caseinolytic and fibrinolytic activities, with increases of 4949.3 unit and 58.2 unit/mg, respectively. The optimal temperature for the production of the enzyme was found to be 4$0^{\circ}C$ in the optimal medium (glucose 20 g, yeast extract 5 g, CaCl$_2$l g, and NaCl 2 g). The maximum fibrinolytic activity was observed at the late stationary phase. B. subtilis KH-4 produced a fibrinolytic enzyme at 4$0^{\circ}C$, after 30 h growth, which increased up to 54 h and then remained constant. These results suggest that Deonjang has potential as a source of physiologically active anti-thromotic enzymes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.580-588
• /
• 2009

A Missile Warning Radar is an essential sensor for active protection system to detect antitank missile in all weather environments. This paper presents the design, development, and test results of L-band pulsed Doppler radar system for main battle tank. This radar system consists of 3 LRUs, which include antenna unit, transmitter and receiver unit and radar signal & data processing unit. The developed core technologies include the patch antenna, SSPA transmitter, coherent I/Q detector, DSP based Doppler FFT filter, adaptive CFAR, SIW tracking capability, and threat decision. The design performance of the developed radar system is verified through various ground fixed and moving vehicle test.

• Journal of Environmental Health Sciences
• /
• v.22 no.3
• /
• pp.98-102
• /
• 1996

This study investigated performance of the phenol degradation and reaction characteristics according to variation of phenol volumetric loading rates and dilution rates in suspension and PACT reactors using Pseudomonas sp. B3. 1. Removal efficiencies of the PAC unit indicated about 100 % with phenol volumetric loading rates from 0.4 phenol $kg/ma^3\cdot d$ to 1.2 phenol $kg/m^3\cdot d$, however, which of the suspension reactor showed about 100% with from 0.2 phenol $kg/m^3\cdot d$ to 0.75 phenol $kg/ma^3\cdot day$. 2. The cell density slightly was decreased from 298.2 mg/l to 272 mg/l, when dilution rate for suspension was reactor increased from 0.4 to 1.41 1/d, and also the cell density suddenly was decreased to 145.5 mg/l and was washed out at the dilution rate higher than 1.60 1/d. But the cell density for the PAC unit was linearly decreased with dilution rate of from 0.8 to 3.0 1/d, and showed 220.75 mg/l at maximum dilution rate. 3. The phenol utilization rate was increased from 0.008 to 0.031 phenol g/l$\cdot$h, when dilution rate for suspension reactor was increased from 0.4 to 1.5 1/d, however, the rate for the PAC unit was linearly increased from 0.017 to 0.061 phenol g/l$\cdot$h as variation changes from 0.017 to 0.061 phenol g/l$\cdot$h dilution rate.

• Journal of the Korean housing association
• /
• v.27 no.5
• /
• pp.25-35
• /
• 2016

he objective of this study was to investigate home network systems presently applied in multi-housing complexes and resident's usage to improve the utilization of these systems and services as well as maintenance methods. Subjects were 27 housing complexes equipped with home network systems in west Pangyo area. The investigation methods of communal network systems were observed and photographed. Unit systems were investigated through photography, interviews, and observation focusing on the utilization of Wall-Pads by visiting one unit of each housing complex. The results are as follows: (1) Most housing complexes that we investigated were built with high-grade IT infrastructure. Also, remote meter reading, electronic security, vehicle access, and building access systems were established. Wall-Pads with similar functions were installed in 23 housing complexes, excluding private rental housing complexes. (2) Even though people were well aware of the need for common systems within their housing complexes, only 10~20% of Wall-Pad menus were used. (3) Low utilization rates of home network stem from Wall-Pad menus which were user-unfriendly, and a lack of user training for the complex's common system and unit system. Therefore, to promote active use of home network systems, the systems must be diversified in accordance with user characteristics. In addition, the Wall-Pad menus should be reorganized to be user-friendly.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.383-390
• /
• 2014

This paper presents an excitatory CMOS neuron oscillator circuit design, which can synchronize two neuron-bursting patterns. The excitatory CMOS neuron oscillator is composed of CMOS neurons and CMOS excitatory synapses. And the neurons and synapses are connected into a close loop. The CMOS neuron is based on the Hindmarsh-Rose (HR) neuron model and excitatory synapse is based on the chemical synapse model. In order to fabricate using a 0.18 um CMOS standard process technology with 1.8V compatible transistors, both time and amplitude scaling of HR neuron model is adopted. This full-chip integration minimizes the power consumption and circuit size, which is ideal for motion control unit of the proposed bio-mimetic micro-robot. The experimental results demonstrate that the proposed excitatory CMOS neuron oscillator performs the expected waveforms with scaled time and amplitude. The active silicon area of the fabricated chip is $1.1mm^2$ including I/O pads.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.10
• /
• pp.959-967
• /
• 2012

The theory for a new electromagnetically biased diskless combined radial and axial magnetic bearing is developed. A typical magnetic bearing system is composed of two radial magnetic bearings and an axial magnetic bearing. The axial magnetic bearing with a large axial disk usually limits rotor dynamic performance and makes assembling and disassembling difficult for maintenance work. This paper proposes a novel electromagnet biased integrated radial-axial magnetic bearing without axial disk. This integrated magnetic bearing uses two axial coils to provide the bias flux to the radial and axial air gaps of the combined bearing. The axial magnetic bearing unit in this combined magnetic bearing utilizes reluctance forces developed in the non-uniform air gaps such that the axial disk can be removed from the bearing unit. The 4-pole homopolar type radial magnetic bearing unit is also designed and analyzed. Three dimensional finite element model for the bearing is also developed and analyzed to illustrate the diskless combined magnetic bearing.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.8
• /
• pp.111-122
• /
• 2019

The purpose of this study was to understand the timing of Gentrification by the study through the analysis of licensing data for food service businesses under the correlation with regional policies and systems. In addition, by analyzing the change in location patterns of the food service business in the district unit plan zones, the cause, development patterns and regional differences were identified. Starting with the Seoul hanok declaration in 2008, the approval of the food service business began to increase, and the floating population increased with the restoration of the Suseong Valley in 2012, and the concentration of food service business increased significantly on the waterway (Jahamun-ro 7-gil). Since the designation of Ikseon-dong as an urban environment readjustment zone in 2004, the approval of new food service business has been very low until around 2014, when the cooperative establishment committee is dissolved, and as the district unit plan for the preservation of hanok and regional management is being established, the number of new permits has exploded to date and restaurants in hanok conservation zones has been active.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.854-859
• /
• 2008

In a railway vehicle, contact between wheel and rail is a peculiar characteristic and variations of wheel and rail profile influence on the dynamic characteristics of railway vehicle. Thus the variations of the wheel and rail profile are very important in railway dynamics. Recently a research relating to active steering to improve the curving performance of vehicle is progressing actively at home and abroad. In this field, a pre-study for the wheel/rail contact geometry is needed and especially the variation of the wheel/rail contact geometry with wheel wear is the key design parameter to develop the controller of the active steering bogie. In this paper, we have experimentally studied to analyze the variation of the wheel/rail contact geometry with wheel wear as a pre-study to develop the active steering bogie for electric multiple unit (EMU). For this, we have made an experiment with EMU operating in curving area. We have measured the wear profiles of the wheel of the test vehicle and analyzed the wheel/rail contact geometry with a mileage of the test vehicle. In experiment with test vehicle, we have got the useful data to design the steering controller of the wheelset.