• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.959-962
• /
• 2004

A strategy for a torque ripple reduction drive of single-phase SRM with high power factor is proposed. The drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current with low torque ripple. The proposed SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as do source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit is discussed in depth through the experimental results.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.308-311
• /
• 2004

A novel single-stage power factor corrected (PFC) drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current. The proposed PFC SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as do source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit will be discussed in depth through the experimental results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.215-217
• /
• 2006

This paper presents an area efficient 8-bit current digital to analog convector (DAC) which is applied to 240 channels Active Matrix - Organic Light Emitting Diode (AMOLED) data driver. The proposed circuit constitutes 4-bit binary weighted current DAC and 4-bit switched capacitor cyclic DAC. The proposed DAC has about 70% smaller area than that of the typical binary weighted current DAC. We overcome sampling time by reducing the number of repetition phases so that it can display 8-bit gray scale image.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.12
• /
• pp.1572-1580
• /
• 1995

In this paper, a modified Chebyshev low-pass filter function is proposed. The modified Chebyshev filter function exhibits ripples diminishing toward .omega. = 0 in the passband. So, the modified filter function is realizable in the passive doubly-terminated ladder network for the order n even or odd, thus lending itself amenable to active RC or switched capacitor filters through the simulation techniques. Besides the passive doubly-terminated ladder realizability, lower pole-Q values of the modified function are accountable for improved phase and delay characteristics, as compared to classical function. We have designed the 6th order passive doubly-terminated network using the modified function. And then a continuous-time DDA(Differential Difference Amplifier) filter, which has no matching requirement, is realized by leap-frog simulation technique for fabrication. In the HSPICE simulation results, we confirmed that the designed continuous-time DDA filter characteristics are agreement with the passive filter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.77-85
• /
• 2009

With the advent of power semiconductor switching devices, power electronics relating to high frequency electromagnetic eddy current based induction heating technology have become more suitable and acceptable. This paper presents high-frequency induction heating cooking appliance circuit based on the zero current switching-PWM single ended push-pull(ZCS-PWM SEPP) resonant inverter added AC-DC converter. This inverter uses pulse-width-modulation(PWM) control method with active auxiliary quasi-resonant lossless inductor snubbers and a switched capacitor. To improved the transient performance, the PI controller is applied for this system. For the systematic parameter optimization of the PI controller, the gradient-based optimization algorithm is applied. The performance of optimized parameters is evaluated using simulation and experimental test. These results show that the proposed systematic optimal tuning method improve the transient performances of this system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.45-50
• /
• 1994

The elliptic filters are optimal in the sense that the magnitude characteristic exhibits the steepest slope at the cutoff frequency. The other characteristics such as delay and step response, however, are rather undesirable. In this paper, the modified elliptic low-pass filter function is proposed. The modified elliptic function possesses progressively diminishing ripples in both passband and stopband, and the lower pole-Q, values when compared to the elliptic counterparts, thus producting the flatter delay characteristics and improved time-domain performances. And it is realizable in the doubley-terminated ladder structures for the order n even or odd, thus lending themselves amaenable to high-quality active RC or switched capacitor filters through the simulation techniques.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1214-1216
• /
• 2004

Conventional Switched Mode Power Supplies(SMPS) with diode-capacitor rectifier have distorted input current waveform with high harmonic contents. Typically, these SMPS have a power factor lower than 0,65. To improve with this problem the power factor correction(PFC) circuit of power supplies has to be introduced. PFC circuit have tendency to be applied in new power supply designs. The input active power factor correction circuits can be implemented using either the two-stage or the single-stage approach. In this paper, the comparative analysis of power factor correction circuit using feedforward control with average current mode single-stage flyback method converter and two-stage converter which is combination of boost and flyback converter. The two prototypes of 50W were designed and tested a laboratory experimental. Also, the comparative analysis is confirmed by simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.979-981
• /
• 2003

A novel single-stage power factor corrected (PFC) drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current. The proposed PFC SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as do source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit will be discussed in depth through the experimental results.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.235-238
• /
• 2001

A novel single-stage power factor corrected (PFC) drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current. The proposed PFC SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as dc source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit will be discussed in depth through the experimental results.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.387-388
• /
• 2020

본 논문은 패시브 셀 밸런싱과 액티브 셀 밸런싱의 에너지 손실 비교에 관한 연구내용이다. 패시브 셀 밸런싱은 저항을 이용하여 과충전된 셀의 에너지를 소모하는 방식이며 액티브 셀 밸런싱은 SSC(Single Switched Capacitor) 구조를 이용하여 높은 에너지 셀의 에너지를 낮은 에너지 상태의 셀로 전달하는 방식이다. 높은 셀과 낮은 셀의 SOC(State Of Charge)의 차이가 5% (0.085 V)일 때 ∆SOC = 3% (∆V = 0.051 V)로 줄이기 위해 패시브 셀 밸런싱과 액티브 셀 밸런싱을 하여 두 셀 밸런싱의 에너지 손실 차이를 시뮬레이션과 실험을 통하여 비교한다.