• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.574-581
• /
• 2016

In this study, CNT functionalized with pyrrolidine ring via 1,3-dipolar cycloaddition reaction with various amino acid and aldehyde was synthesized. Metallocene was subsequently immobilized on the functionalized CNT and CNT/polyethylene composite was prepared via in-situ ethylene polymerization. The polymerization activities of metallocene supported on CNT functionalized with glycine and benzaldehyde (Gly+BA-CNT) were similar to those of metallocene supported on CNT functionalized with N-benzyloxycarbonylglycine and paraformaldehyde (Z-Gly+PFA-CNT) although its Zr content was lower than that of Z-Gly+PFA-CNT. In the case of metallocene supported on Z-Gly+PFA-CNT, the even distribution of active sites hindered the diffusion of ethylene monomer and cocatalyst MAO due to steric hindrance during ethylene polymerization. Compared to polyethylene produced from homogeneous metallocene catalysts, CNT/PE composites had a higher initial degradation temperature ($T_{onset}$) and maximum mass loss temperature ($T_{max}$). It suggests that pyrrolidine functionalized CNT is uniformly dispersed and strongly interacted with the PE matrix, enhancing the thermal stability of PE.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.223-229
• /
• 2013

It is not known in details for the A.D. period as the archaeomagnetic dating method to be fully facilitated in Korea but it has prepared for the revised shape of standard curve to trace the geomagnetic field variation, and there were cases to increase the survey on relics on the B.C. period to find out for the detailed archaeomagnetic field variation on the Bronze Age to the Early Iron Age. Furthermore, the survey cases on the relics on the Neolithic Age began to emerge a little by little archaeomagnetic field variation of the Neolithic Age through 34 pieces of the archaeomagnetic measurement data as making active advancement around mid-western region. Data is insufficient yet that it is difficult to find out the detailed trend of modification but it is estimated for approximate appearance. The archaeomagnetic field variation of the Neolithic Age made changes without breaking away from the scope of changes in the A.D. period as in the same way with the Bronze Age, and comparing to the variation of archaeomagnetic field for the Bronze Age, the magnetic inclination shifted within the scope of having almost no difference, but the declination is shown to skewed toward the east in its overall appearance. In addition, the comparison was made with the data of the Jomon Age in Japan and the archaeomagnetic measurement data of Korea has a little bit more depth for while the declination is skewed toward the east for 10 degree or more compared to those of Japan. However, in the part where the data is concentrated most intensely, the data for both countries has significant part to overlap to each other that the archaeomagnetic field variation of the Neolithic Age of Korea showed overall similar variation with certain partial changes when compared to those of Japan.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.653-657
• /
• 2009

Nitrous oxide is a typical greenhouse gas which is produced from various organic or fossil fuel combustion processes as well as chemicals producing plants. $N_2O$ has a global worming potential of 310 times that of $CO_2$ on per molecule basis, and also acts as an ozone depleting material in the stratosphere. However, its removal is not easy for its chemical stability characteristics. Most SCR processes with several effective reducing agents generally require the operation temperature higher than $450^{\circ}C$, and the catalytic conversion becomes decreased significantly when NOx is present in the stream. Present experiments have been performed to obtain basic design data of actual application concerning the effects of $SO_2$ and $NH_3$ on the interim and long term activities of $N_2O$ reduction with CO over the mixed metal oxide (MMO) catalyst derived from a hydrotalcite-like compound precursor. The MMO catalysts used in the experiments, have shown prominent activities displaying full conversions of $N_2O$ near $200^{\circ}C$ when CO is introduced. The presence of $SO_2$ is considered to show no critical behavior as can be met in the $NH_3$ SCR DeNOx systems and the effect of $NH_3$ is considered to play as mere an impurity to share the active sites of the catalysts.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.420-426
• /
• 2017

Methicillin-resistant Staphylococcus (MRS) can be colonized in various body sites and is more frequently isolated in healthcare associated persons. This study aimed to evaluate the contamination rate of MRS in a high school environment, those living with closed life style. Staphylococcus aureus was isolated from only the hands of 2 students among a sample of 28 students, and S. aureus were susceptible to methicillin antibiotics. Coagulase negative Staphylococci (CoNS) were isolated from the hands of 26 students (26/28, 92.9%), and among them, 14 (53.8%) isolates were methicillin-resistant CoNS (MRCoNS). Among the 14 MRCoNS, S. warneri was the most common (8/14, 57%) and susceptible to most $non-{\beta}-lactam$ antibiotics, such as clindamycin, erythromycin, ciprofloxacin, tetracycline, gentamicin, and vancomycin. In a culture of 31 desks, S. aureus was not isolated but CoNS were isolated from 26 desks (26/31, 83.6%), which did not harbor the mecA gene. The other bacteria isolated from the hands and desks were Micrococcus and Bacillus spp. In conclusion, methicillin-resistant S. aureus was not isolated from the hands and desks of high school students. However, the frequency of MRCoNS harboring mecA gene were high in the hands of high school students. Therefore, to prevent and to control the transfer of infection, intensifying preventive education, such as hand washing, and active surveillance systems, such as an investigation of contamination or carrier rate of resistant bacteria are necessary.

• Applied Biological Chemistry
• /
• v.47 no.3
• /
• pp.321-324
• /
• 2004

Smoke rods were prepared for 2 insecticides and 5 fungicides using powdered rice chaff as a combustible carrier, and their burning characteristics were investigated. The distribution of active ingredient was investigated after the application of the granular smoke generator containing fenarimol in the connected vinyl plastic house growing cucumber. The protective effects of fungicide smoke generators were evaluated against cucumber gray mold (Botrytis cinerea) and tomato late blight (Phytophthora infestans), and compared with commercial wettable powders. Smoke rods containing powdered rice chaff showed high smoking rates of AI that were higher than commercial smoke pellets. The deposition of fenarimol on the ground of vinyl plastic house was $26.2{\pm}7.7\;ng/cm^2$ when averaged from 9 sites, and application uniformity was found. Also, the protective effects of 5 fungicidal smoke rods against plant diseases were so similar to the commercial wettable powders with no phytotoxicity that smoke rod formulations containing rice chaff as a combustible carrier could be used as an effective formulation for pesticides.

• The Journal of Engineering Geology
• /
• v.8 no.1
• /
• pp.35-49
• /
• 1998

To interpret the movement historv of the Yangsan fault, the paleostresses were analyzed from about 1,000 striated small faults and 330 extension joints which were measured from 37 sites near and along the strike of the Yangsan fault from Yangsan-si, Kyeongsangnam-do to the Shinkwang-myeon, Kyeongsangbuk-do. Six sequential tectonic events have boen established as followings: (I) NW-SE extension, (Il) ENE-WSW compression and NNW-SSE extension, (III) NW-SE compression, (W) ENE-WSW extension, (V) E-W comoression and N-S extension, and (VI) NNE-SSW compression and(VI) NNE-SSWextension. The movement history of the Yangsan fault rnrning in NNE direction were inteepreted based on these six sequential stress fields. The initial feature of the Yangsan fault was formed at the first stage with the development of extension fractures by tectonic event (I) of NW-SE extension. The fault was acted continuously with a right-1ateral strike-slip movement by tectonic event( II) closely related to event( I). The movements had been continued until the Late Miocene. This age was the most active period in faulting. The left-lateral strike-slip movement was followed by subsequent tectonic events (ffi) and (IV). The activity of the Yangsan fault was suspended temporarily by compression of tectonic event (V) which was perpendicular to the strike of the fault. This period might be very short and the magnitude of the tectonic was also small. In the last stage, the fault acted with slight extension or right-lateral moveenent by tectonic event (VI).

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.69-86
• /
• 2011

The objective of this research is to unveil the dynamic changes of the trends in wedding dresses during the 20th Century. The studies were carried out in two forms; firstly by observing the actual wedding dresses worn by people at that time, and secondly by conducting formative comparisons between those dresses with the ones appeared in movies corresponding to that period. Movies provide an invaluable insight into the era's wedding dresses fashion trends since they function as intimate bridges in connection with the time's audience, and the visible imageries accurately reflect the characteristics embedded within that time frame. As there are no precedent studies regarding this topic, this thesis can serve as vital research data for the wedding dress industry. Research data regarding the actual wedding dresses were collected from books and museum web sites. The object of movies were films produced before World War II that contained both the background settings of the 20th Century and wedding dresses, of which photographic imageries were captured. Research analysis was then conducted by merging these data with findings from relevant books and internet materials. The results of the thesis are as the following: The 1900s was an extension of the 19th Century's popular fashion trend which can be characterized as the S curve silhouettes of the Edwardian period when long trains and long veils symbolized wealth and social power. In the 1910s, high waist silhouettes with soft wrinkles were prevalent as attire suitable for active mobility with practical functionality were highly regarded. During the 1920s, the flapper style became the dominant trend. Hem lines of the skirts were curled in the form of the scallop and laces were the most widely used raw materials. By the 1930s, wedding dresses that reinterpreted the glamorous sheath lines, practical two piece styles, and retro-styles became predominant. The 1940s saw the advent of ready-made wedding dresses made of synthesized materials; practical military style suits and casuals sometimes substituted the wedding dresses. And although the wedding dresses in the movies were primarily costumes to express the personalities of the characters, they were also reinterpreted as manifestations of the formative characteristics of each relative period that pursued very distinct and diverse features.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.165-174
• /
• 1991

The kinetics and the mechanism for the selective oxidation of ethylene on the supported monolithic silver catalyst were experimentally investigated in a fixed bed tubular reactor. The formation rates of ethylene oxide and carbon dioxide were measured at the atmospheric pressure with various combinations of partial pressures of ethylene and oxygen at temperature range of $225-300^{\circ}C$, conversion with 1.2-7.5 %, and then the mechanism of the selective oxidation of ethylene was verified. Their formation rates fitted with the Langmuir-Hinshelwood mechnism. The ethylene oxide and carbon dioxide are produced by reation of adsorbed ethylene with monoatomic oxygen adsorbed on the active sites of Ag-surface, and their formation rate equation are expressed as : $R_{EO}={\frac{k_1K_0{^{1/2}}K_EK_SP_{02}{^{3/2}}P_E}{(1+{\sqrt{K_0P_{02}}}+K_EP_E+K_PP_P)^2(1+{\sqrt{K_SP_{02}})^2}}$ $R_C={\frac{k_2K_0{^3}K_EK_S{^{7/2}}P_{02}{^{13/2}}P_E}{(1+{\sqrt{K_0P_{02}}}+K_EP_E+K_PP_P)^7(1+{\sqrt{K_SP_{02}})^7}}$ The activation energies of ethylene oxide and dioxide and carbon dioxide formations can be estimated to be 12.25 and 17.85 Kcal/mol, respectively.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.237-241
• /
• 1999

Nickel was impregnated on the $SiO_2$ and $Al_2O_3$ supports and applied to the reduction reaction of CFC-113 ($CF_2Cl$-$CFCl_2$) with hydrogen to 3FCl ($CF_2$=CFCl, CFC-1113). The conversion was rapidly declined on the Ni/$SiO_2$(or $Al_2O_3$) and the deactivation accelerated as the increase of Ni content. However, the selectivity of 3FCl was maintained at around 80% level. The simultaneous coprecipitation of copper and lithium on Ni/$Al_2O_3$ improved both the conversion and selectivity to 3FCl, but an excessive amount of lithium reduced the conversion as well as the selectivity of 3FCl. However, in the case of Ni/$SiO_2$, the conversion was greatly reduced possibly due to a loss of silica support with high surface area by the reaction of $SiO_2$ with HF. Such a reduction in conversion also can be ascribed to the decrease in active sites, caused by the addition of alkali metal compound, LiOH.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.343-348
• /
• 2010

The surface of low density polyethylene (LDPE) film was oxyfluorinated under different reaction conditions to introduce hydroperoxide groups and change surface characteristics. Hydroperoxide functional groups created by oxyfluorination were used as active sites for graft polymerization with hydrophobic monomer, acryl amide (AM), and hydrophilic monomer, methyl methacrylate (MMA) to carry out the second modification of the LDPE film surface. The surface properties of the OFPE films and grafted OFPE films were characterized by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging method, ATR-IR, contact angle measurement and DSC. From the results of DPPH method, the amount of hydroperoxide groups on the oxyfluorinated LDPE film continuously increased as the total pressure in the oxyfluorination and the partial pressure of fluorine gas increased. The water contact angle and surface free energy measurements showed that hydrophilic liquid (water) contact angle on LDPE film surface decreased with hydrophilic AM grafting and hydrophobic liquid (methylene diiodide) contact angle on LDPE film surface decreased with hydrophobic MMA grafting. These were attributed to AM or MMA monomer grafting and the wettability of LDPE filmsurface to hydrophilic and hydrophobic liquids were improved.