• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.130-135
• /
• 2006

There have been experiments dealing with the possibility of the actualization of the ANC system by means of operating the DSP adaptation filter. This filter is composed of various filters(including X-LMS algorithm, Filter-U algorithm, and Full-Feedback-Filter-U algorithm) that use ventilation fans and loudspeakers as a primary source in a circular duct as an experimental device. In this operation, the ANC system using the X - LMS algorithm was found to be more effective in reducing noise than without such system. When applying the input signal of the DSP board Full Feedback-Filtered-U algorithm system while having in mind that the additionally installed second control signal was gone through feedback and mixed into the detection microphone installed near the ventilation fan when using the first ventilation fan, the system was not emitted, but maintained stable during the operation of the control filter. At this point, noise tended to decrease at a maximum of l0dB compared to other algorithms at the frequency band of 170-250Hz.

• International Journal of Automotive Technology
• /
• v.3 no.4
• /
• pp.147-155
• /
• 2002

Mechatronic subsystems are more and more developed in automotive industries. To enhance the local controls performances, a cooperative control between ABS and Suspension systems is proposed. The respective controls are first designed separately with their dedicated models. Then a hybrid hierarchical architecture is developed. The advantage of this architecture is discussed through vehicle performance with simulation results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.5
• /
• pp.413-417
• /
• 2002

The Internet technology has been recognized not only as a tool far communication in the 21st century but also as an environment for enabling changes in the paradigm of teaching and learning. This paper describes a web-based system development for chemical engineering education. Simulation and visualization of dynamic systems in the environment of a standard web-browser is made possible by extending its capabilities. ActiveX control is used to simulate the system tool far online representation of Virtual Lab. System that is developed using visual basic. The courseware is classified into tutorial, exercises, and virtual experiments.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.245-248
• /
• 2008

This paper gives a description of the mode'ling and control of a single phase PWM(Pulse Width Modulation) converter for HEMU-400X(High-speed Electric Multiple Unit - 400 km/h experiment). The converter is part of a Auxiliary power unit supplied by the 25[kV], 60[Hz] overhead line. A model of the converter in a synchronously rotating reference frame of coordinates is used to develop a new type of control. The control system has separate controllers for the active and reactive current, permitting the free choice of the power factor. This paper proposes a new control method of PWM converter for Auxiliary power unit.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.559-567
• /
• 2020

Vibration at the tip of various flexible manipulators may affect their operation accuracy and work efficiency. To suppress such vibrations, the feasibility of using MFC actuators and sensors is investigated in this paper. Considering the convergence of the famous filtered-x least mean square (FXLMS) algorithm could not be guaranteed while it is employed for vibration suppression of plants with varying secondary path, this paper proposes a new multiple model switching adaptive control algorithm to implement the real time active vibration suppression tests with a new multiple switching strategy. The new switching strategy is based on a cost function with reconstructed error signal and disturbance signal instead of the error signal from the error sensor. And from a robustness perspective, a new variable step-size sign algorithm (VSSA) based FXLMS algorithm is proposed to improve the convergence rate. A cantilever beam with varying tip mass is employed as flexible manipulator model. MFC layers are attached on both sides of it as sensors and actuators. A co-simulation platform was built using ADAMS and MATLAB to test the feasibility of the proposed algorithms. And an experimental platform was constructed to verify the effectiveness of MFC actuators and sensors and the real-time vibration control performance. Simulation and experiment results show that the proposed FXLMS algorithm based multiple model adaptive control approach has good convergence performance under varying load conditions for the flexible cantilever beam, and the proposed FX-VSSA-LMS algorithm based multiple model adaptive control algorithm has the best vibration suppression performance.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.323-326
• /
• 1992

In this paper, the active noise control(ANC) system using the inverse modeling techiniques is presented. The nonlinearity and time delay of the transfer function from the secondary speaker to the error microphone makes the ANC system have poor performance. To solve this problem, the inverse model technique and filtered-X LMS algorithm is using proposed. This proposed ANC system is implemented using DSP chip and operated in on-line. The experimental results show that this ANC system has better noise canceling performance than that used LMS only about 5-15[db]

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1307-1309
• /
• 1996

This paper presents hybrid active noise control (HANC) systems which is based on the combination of feedforward and feedback ANC controllers. HANC systems use FIR filters and is based on primary noise regeneration principle and filtered-X LMS algorithms. HANC systems show better attenuation characteristics and residual spectrum. The order of adaptive filters used in HANC systems is lower than that of conventional feedforward and feedback ANC systems. A proposed HANC algorithm was implemented using a Taxas Instruments TMS320C31 digital signal processor for experimental verification.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.1
• /
• pp.57-63
• /
• 2006

We have cloned a xylanase gene (xynA) from Streptomyces thermocyaneoviolaceus. The deduced amino acid sequences of the XynA, including the active site sequences of glycosyl hydrolase family 10, showed high sequence homology with several xylanases assigned in this category. The XynA was overexpressed under an IPTG inducible T7 promoter control in E. coli BLR(DE3). The overproduced enzymes were excreted into culture supernatants and periplasmic space. The purified XynA had an apparent molecular mass of near 54 kDa, which corresponds to the molecular mass calculated from its gene. The optimum pH and temperature of the purified XynA were determined to be 5.0 and $65^{\circ}C$, respectively. The XynA retained over $90\%$ its activity after the heat treatment at $65^{\circ}C$ for 30 min. The XynA was highly efficient in producing xylose (X1), xylobiose (X2), xylotriose (X3), and xylotetraose (X4) from xylan.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.46-54
• /
• 2021

In this paper, active noise control was performed to reduce radiated noise in the low frequency band of dishwashers. First, through an analysis of the noise environment of the dishwasher, it was confirmed that the pump noise contributed the most to the radiated noise in the low frequency band, From the result of the noise environment analysis, the reference signal was selected to be the vibration signal of the pump body. The reference signal was obtained by using the accelerometer on the pump body, which can prevent acoustic feedback. The error signal sensor was selected as a microphone located at 1 m in front of the dishwasher and 0.5 m in height. And to design the controller, the error signal and the reference signal were measured at the operational rpms of the dishwasher at 2,500 rpm, 2,600 rpm and 2,800 rpm, and the secondary path transfer function was measured. The designed controller was mounted on Digital Signal Processor (DSP) equipment, and the control performance was verified experimentally. As a result of the measurement at the 3 operational rpms, the 7th multiple component of pump operating frequency decreased by 1.93 dB, 4.43 dB, 5.15 dB per rpm, and the 12th multiple component decreased by 6.67 dB, 2.34 dB, 4.28 dB per rpm. And overall Sound Pressure Level (SPL) decreased by 0.84 dB, 2.58 dB, 1.48 dB by rpm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.231-239
• /
• 2009

The filtered-x LMS (FX-LMS) algorithm has been applied to the active noise control (ANC) system in an acoustic duct. This algorithm is designed based on the FIR (finite impulse response) filter, but it has a slow convergence problem because of a large number of zero coefficients. In order to improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct since the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filteredu LMS algorithm (FU-LMS) based on infinite impulse response (IIR) is developed by considering the backward acoustic propagation. This algorithm, unfortunately, generally has a stability problem. The stability problem was improved by using an error smoothing filter. In this paper, the recursive LMS algorithm with variable step size and smoothing error filter is designed. This recursive LMS algorithm, called FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct such as the intake system of an automotive. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal of which the instantaneous frequency is variable. Test results demonstrate that the FU-VSSLMS algorithm has superior convergence performance to the FX-LMS algorithm and FX-LMS algorithm. It is successfully applied to the ANC system in a short duct.