• Korean Journal of Poultry Science
• /
• v.24 no.3
• /
• pp.107-116
• /
• 1997

In order to achieve optimal reproductive performance, reliable morphological and physiological basic data on the reproductive organs are desirable. Adult male Korean ring-necked pheasant in inactive(mid of January) and active state (end of April) were used in this study. In addition, five active state pheasants were received a single dose of 60Co-ray 500 rads each to damage the testes. The objective of this study was to investigate the distribution pattern of protein gene product (PGP) 9.5 and ${\alpha}$-tubulin in the pheasant testes of the active, inactive and ${\gamma}$-ray irradiated active states. The results obtained were summarized as follows 1. The seminiferous tubules collected in inactive states( mid of Jan) showed narrow lumen, and the spermatogonia and the Sertoli cell were well preserved. The PGP 9.5 immunoreactivity of these tubules showed a positive reaction in paranucleus area of the spermatogonia, and a positive reaction in a small number of the Leydig cells in the interstitium of the seminiferous tubules. 2. The seminiferous tubules were dilated in active state(end of April) as compared with the inactive state. The PGP 9.5 reactivity in these tubules showed a positive reaction in many Leydig cells in the interstitium of the seminiferous tubules, and the testes of ${\gamma}$-ray irradiated group showed partially weak reaction in the interstitium of the seminiferous tubules. 3. The ${\alpha}$-tubulin reactivity in the seminiferous tubules of the inactive testes was strongly positive in the cytoplasmic process of the Sertoli cell from the basal stem region to the apical ex-tension. From the broad part of the stem region to the luminal space, the active testes showed a strong positive reaction. The ${\gamma}$-ray irradiated groups showed diminished reaction in the basal region.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1131-1140
• /
• 2016

A simple design for a sliding mode observer is proposed for EV lithium battery SOC estimation in this paper. The proposed observer does not have the limiting conditions of existing observers. Compared to the design of previous sliding mode observers, the new observer does not require a solving matrix equation and it does not need many observers for all of the state components. As a result, it is simple in terms of calculations and convenient for engineering applications. The new observer is suitable for both time-variant and time-invariant models of battery SOC estimation, and the robustness of the new observer is proved by Liapunov stability theorem. Battery tests are performed with simulated FUDS cycles. The proposed observer is used for the SOC estimation on both unchanging parameter and changing parameter models. The estimation results show that the new observer is robust and that the estimation precision can be improved base on a more accurate battery model.

• Korean Journal of Social Welfare
• /
• v.60 no.3
• /
• pp.201-230
• /
• 2008

While the constitutional states emerged in the period of the constitutional monarchies to protect freedom and property of citizens from a illegal trespass of monarchs, the passive role of the constitutional states to protect them was changed in the modern parliamentary democracy in which the state is to play an active role to realize the basic rights. Today the state giving chances and social benefits to citizens plays a very important role so that the people may to enjoy a free life as a citizen. In the modern parliamentary democracy the role of the state, therefore, is transformed form passive roles to active ones realizing the basic rights for citizens. The active role of the state to embody the basic rights asks the parliament to bear more the responsibility for making laws than ever before. In the modern welfare state social rights are also recognized as a basic right. In this sense the parliament should play a active role to realize the social rights. But the Korean parliament excessively turns over his legislative right on the basis of a delegated legislation to the Administration. It does not fulfill its responsibility for which the modern parliamentary democracy asks. To realize the social rights the Korean parliament should play a more active role.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.766-776
• /
• 2017

In modern power systems, high penetration of distributed generators (DGs) results in high stress on system stability. Apart from the intermittent nature of DGs, most DGs do not contribute inertia or damping to systems. As a result, a new control method named virtual synchronous machine (VSM) was proposed, which brought new characteristics to inverters such as synchronous machines (SMs). In addition, different active power droop controls for VSMs are being proposed in literatures. However, they are quite different in terms of their dynamic characteristics despite of the similar control laws. In this paper, mathematical models of a VSM adopting different active power droop controls are built and analyzed. The dynamic performance of the VSM output active power and virtual rotor angular frequency are presented for different models. The influences of the damping factor and droop coefficient on the VSM dynamic behaviors are also investigated in detail. Finally, the theoretical analysis is verified by simulations and experimental results.

• Geomechanics and Engineering
• /
• v.8 no.3
• /
• pp.461-476
• /
• 2015

Rankine's theory of earth pressure cannot be directly employed to c-${\phi}$ soils backfill with a sloping ground subjected to complex loadings. In this paper, an analytical solution for active earth pressures on retaining structures of cohesive backfill with an inclined surface subjected to surcharge, pore water pressure and seismic loadings, are derived on the basis of the lower-bound theorem of limit analysis combined with Rankine's earth pressure theory and the Mohr-Coulomb yield criterion. The generalized active earth pressure coefficients (dimensionless total active thrusts) are presented for use in comprehensive design charts which eliminate the need for tedious and cumbersome graphical diagram process. Charts are developed for rigid earth retaining structures under complex environmental loadings such as the surcharge, pore water pressure and seismic inertia force. An example is presented to illustrate the practical application for the proposed coefficient charts.

• Structural Engineering and Mechanics
• /
• v.38 no.2
• /
• pp.141-156
• /
• 2011

A cable stayed bridge under construction has low structural damping and is not as stable as the completed bridge. Control countermeasures, such as the installation of energy dissipating devices, are thus required. In this study, the general procedure and key issues on adopting an active control device, the active mass damper (AMD), for vibration control of cable stayed bridges under construction were studied. Taking a typical cable stayed bridge as the prototype structure; a lab-scale test structure was designed and fabricated firstly. A baseline FEM model was then setup and updated according to the modal parameters measured from vibration test on the structure. A numerical study to simulate the bridge-AMD control system was conducted and an efficient LQG-based controller was designed. Based on that, an experimental implementation of AMD control of the transverse vibration of the bridge model was performed. The results from numerical simulation and experimental study verified that the AMD-based active control was feasible and efficient for reducing dynamic responses of a complex structural system. Moreover, the discussion made in this study clarified some critical problems which should be addressed for the practical implementation of AMD control on real cable-stayed bridges.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.412-418
• /
• 2010

This paper proposes a new algorithm to generate a reference signal for an active power filter using a sliding-window FFT operation to improve the steady-state performance of the active power filter. In the proposed algorithm the sliding-window FFT operation is applied to the load current to generate the reference value for the compensating current. The magnitude and phase-angle for each order of harmonics are respectively averaged for 14 periods. Furthermore, the phase-angle delay for each order of harmonics passing through the controller is corrected in advance to improve the compensation performance. The steady-state and transient performance of the proposed algorithm was verified through computer simulations and experimental work with a hardware prototype. A single-phase active power filter with the proposed algorithm can offer a reduction in THD from 75% to 4% when it is applied to a non-linear load composed of a diode bridge and a RC circuit. The active power filter with the proposed reference generation method shows accurate harmonic compensation performance compared with previously developed methods, in which the THD of source current is higher than 5%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.36-42
• /
• 1998

In this study, active muffler was designed and was manufactured for exhaust noise reduction of commercial vehicle, then experiment of real vehicle was conducted. In a manufactured active muffler, because the flow of exhaust noise in tail pope outlet are become a plane wave, the global reduction if radiation noise from outlet and the placement of error microphone to avoid the exhaust gas of high temperature could be implemented. In control algorithm, reduction of noise of engine driving frequency and harmonic frequency can be archieved using proposed reference signal including a fixed speed state(2,000rpm, 3,000rpm, 4,000rpm) and a run-up speed state(2,000rpm$\rightarrow$4,000rpm) is accomplished with the active muffler installed in vehicle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2179-2186
• /
• 1997

In this paper, the performance of a semi-active suspension system for a passenger car has been investigated. Alternative semi-active suspensions control laws has been compared via simulations. The control laws investigated in this study are : sprung mass velocity feedback control law, sky-hook damping control law, and state feedback control law. Simulation results show that a semi-active suspension has potential to improve ride quality of automobiles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.660-664
• /
• 2003

The optimal thickness distribution of an active damping layer is sought so that it satisfies a certain constraint on the dynamic performance of a system minimizing control efforts. To obtain a topologically optimized configuration, which includes size and shape optimization, thickness of the active damping layer is interpolated using linear functions. With the control energy as the objective function to be minimized, the state error energy is introduced as the dynamic performance criterion for the system and used lot a constraint. The optimal control gains are evaluated from LQR simultaneously as the optimization of the layer position proceeds. From numerical simulation, the topologically optimized distribution of the active damping layer shows the same dynamic performance and cost as the Idly covered counterpart, which is optimized only in terms of control gains, with less amount of the layer.