• Wind and Structures
• /
• 제10권4호
• /
• pp.301-314
• /
• 2007

The lever-type active multiple tuned mass dampers (LT-AMTMD), consisting of several lever-type active tuned mass dampers (LT-ATMD), is proposed in this paper to attenuate the vibrations of long-span bridges under the excitation directly acting on the structure, rather than through the base. With resorting to the derived analytical-expressions for the dynamic magnification factors of the LT-AMTMD structure system, the performance assessment then is conducted on the LT-AMTMD with the identical stiffness and damping coefficient but unequal mass. Numerical results indicate that the LT-AMTMD with the actuator set at the mass block can provide better effectiveness in reducing the vibrations of long-span bridges compared to the LT-AMTMD with the actuator set at other locations. An appealing feature of the LT-AMTMD with the actuator set at the mass block is that the static stretching of the spring may be freely adjusted in accordance with the practical requirements through changing the location of the support within the viable range while maintaining the same performance (including the same stroke displacement). Likewise, it is shown that the LT-AMTMD with the actuator set at the mass block can further ameliorate the performance of the lever-type multiple tuned mass dampers (LT-MTMD) and has higher effectiveness than a single lever-type active tuned mass damper (LT-ATMD). Therefore, the LT-AMTMD with the actuator set at the mass block may be a better means of suppressing the vibrations of long-span bridges with the consequence of not requiring the large static stretching of the spring and possessing a desirable robustness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.861-862
• /
• 2013

• Earthquakes and Structures
• /
• 제13권1호
• /
• pp.1-8
• /
• 2017

This article is all about using the MR damper with an external lever system for mitigation torsional and transitional lateral displacements by using of PID control algorithm. The torsional modes are so destructive and can be varied during an earthquake therefore, using a semi-active control system mostly recommended for them. In this paper the corner lateral displacement of each floor obtains and then it equivalents in a solid member and it connects to an MR damper, which relies to a rigid structure to reduce the response. An MR damper is a semi-active control system, which can absorb a lot of energy by injecting current to it. This amount of current is very low and needs low power supply, but it increases the amount of damper force, rather than inactive systems like viscous dampers. This paper will show the appropriate algorithm for current injection into MR damper when the eccentricity of the load is changed by using of Bouc-Wen and Bingham's methods and illustrates the coincidence of them.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.543-544
• /
• 2006

• Biomolecules & Therapeutics
• /
• 제29권4호
• /
• pp.384-391
• /
• 2021

Currently, the expanding recreational use of synthetic cannabinoids (SCBs) threatens public health. SCBs produce psychoactive effects similar to those of tetrahydrocannabinol, the main component of cannabis, and additionally induce unexpected pharmacological side effects. SCBs are falsely advertised as legal and safe, but in reality, SCB abuse has been reported to cause acute intoxication and addictive disorders. However, because of the lack of scientific evidence to elucidate their dangerous pharmacological effects, SCBs are weakly regulated and continue to circulate in illegal drug markets. In the present study, the intravenous self-administration (IVSA) paradigm was used to evaluate the abuse potential of three SCBs (AM-1248, CB-13, and PB-22) in rats. All three SCBs maintained IVSA with a large number of infusions and active lever presses, demonstrating their reinforcing effects. The increase of active lever presses was particularly significant during the early IVSA sessions, indicating the reinforcement-enhancing effects of the SCBs (AM-1248 and CB-13). The number of inactive lever presses was significantly higher in the SCB groups (AM-1248 and CB-13) than that in the vehicle group, indicating their impulsive effects. In summary, these results demonstrated that SCBs have distinct pharmacological properties and abuse potential.

• 대한한의학회지
• /
• 제25권4호
• /
• pp.51-60
• /
• 2004

Objective : The effect Saenggitang (GT), which has been used for amnesia, in Oriental Medicine, on memory and learning ability, was investigated. Methods : Hot water extracts (HWE) of SGT were used for the studies. In passive avoidance performances (step through test), active avoidance performances (lever press test), Motor activity, pentobarbital-induced sleep, 20 and 50 mg/100g of SGT-HWE ameliorated the memory retrieval deficit induced by 40% ethanol. Results : The SGT-HWE did not affect the ambulatory activity of normal mice in normal condition. 20 and 50 mg/100g of SGT-HWE enhanced contextual fear memory, but not cued fear memory in a fear conditioning task, which requires the activation of the NMDA (N-methyl-D-aspartase) receptor. SGT-HWE did not affect the motor activity measured by the titling type ambulometer test performed immediately and 24 hr after the administration. SGT-HWE prolonged the sleeping time induced by 50 mg/kg pentobarbital in mice and decreased SMA (spontaneous motor activity) in active avoidance performances (lever press test). Conclusion : These results indicate that the SGT-HWE have an improving effect on the memory retrieval disability induced by ethanol and may act as a stimulating factor for activating the NMDA receptor. and the SGT-HWE has a tranquilizing and anti-anxiety action.

• The Journal of Korean Physical Therapy
• /
• 제14권4호
• /
• pp.260-265
• /
• 2002

There are many methods for muscle strengthening. Muscle strengthening with eccentric contraction work is the best way by researcher's report. Also, eccentric contraction need proper resistance for muscle strengthening. Combination of isotonic in PNF is a muscle strengthening method with manual resistance. It makes concentric contraction $\rightarrow$ eccentric contraction $\rightarrow$ concentric contraction with continually and without muscle relaxation. Combination isotonic technique use with PNF pattern. Therefore, it will make development and increasing of active control motion, coordination, actual range of motion, strengthen and functional training in eccentric control of movement. Concentric contraction have the 3rd lever system and eccentric contraction have the 2nd lever system with combination of isotonic. Serial concentric contraction $\rightarrow$ eccentric contraction $\rightarrow$ concentric contraction make strong SEC and PEC. It will be increase elasticity of SEC, PEC and contractile components either.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.647-650
• /
• 2004

The modeling of an active vibration isolation system is accomplished by using the equivalent spring constant, mass and rotational Inertia of each component. The detailed model of the actuation module is successful for describing its frequency-domain performance but also too complicated to implement it to actual system for control so that the order of the model is reduced up to the degree that preserves its characteristic in the low frequency range. The reduced model is suitable for identifying the unknown system parameters such as damping constants of components. The overall isolation system is described by using the reduced model of the actuation module. The accurate model ing and system parameter identification that is essential for the control of the active vibration isolation system is attained successfully.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.153-156
• /
• 2006

The vibration isolation system is a system that attenuates the vibration transmitted from surroundings by using external energy supply like electricity and feedback and/or feedforward functions. Such a system needs stiff structure to make precise positioning without ripple within a certain bandwidth. So, a horizontal and rotary arrangement of the actuation module is suggested by using lever linkage. Modeling and kinematic formulation are completed and system identification is accomplished to tune the design variables accurately. The vibration isolation control is performed by mu-synthesis with the uncertainties in design variables. Low frequency signal enhancement circuit and saturation proof integration algorithm are devised to use seismic sensors for displacement control. This overall system shows good disturbance rejection performance.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.153-159
• /
• 1997

A thermally-driven polysilicon microactuator has been fabricated using surface micromachining techniques. It consists of P-doped polysilicon as a structural layer and TEOS(tetraethylorthosilicate) oxide as a sacrificial layer. The polysilicon was annealed for the relaxation of residual stress which is the main cause to its deformation such as bending and buckling. And newly developed HF GPE(gas-phase etching) process was also employed to eliminate the troublesome stiction problem using anhydrous HF gas and CH$_{3}$OH vapor, and successfully fabricated the microactuators. The actuation is incurred by the thermal expansion due to the current flow in the active polysilicon cantilever, which motion is amplified by lever mechanism. The moving distance of polysilicon microactuator was experimentally conformed as large as 21 .mu. m at the input voltage level of 10V and 50Hz square wave. The actuating characteris- tics are also compared with the simulalted results considering heat transfer and thermal expansion in the polysilicon layer. This microactuator technology can be utilized for the fabrication of MEMS (microelectromechanical system) such as microrelay, which requires large displacement or contact force but relatively slow response.