• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.469-476
• /
• 2005

To date, many viable smart base isolation systems have been proposed. In this study, a novel friction pendulum system (FPS) and an MR damper are employed as the isolator and supplemental damping device, respectively. A fuzzy logic controller (FLC) is used to modulate the MR damper. A genetic algorithm (GA) is used for optimization of the FLC. The main purpose of employing a GA is to determine appropriate fuzzy control rules as well to adjust parameters of the membership functions. To this end, a GA with a local improvement mechanism is applied. Neuro-fuzzy models are used to represent dynamic behavior of the MR damper and FPS. Effectiveness of the proposed method for optimal design of the FLC is judged based on computed responses to several historical earthquakes. It has been shown that the proposed method can find appropriate fuzzy rules and the GA-optimized FLC outperforms not only a passive control strategy but also a human-designed FLC and a conventional semi-active control algorithm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.252-257
• /
• 1995

전자기력을 이용한 능동 진동제어는 1979년 Ellis 및 Mote가 원형 톱의 횡 진동의 감쇠에 관한 연구를 수행하였고, 1990년 Hong Su 및 T.S.Sankar등은 시스템의 절대 위치, 절대 속도 및 상대 위치 등의 제어 변수에 대하여 전자기 액튜에이터의 동적 특성이 진동 절연 성능에 미치는 영향에 관한 연구를 하였다. 본 연구는 상부질량과 하부질량이 스프링으로 연결된 2자유도 모델의 능동 진동제어에 대하여 이론해석과 실험해석을 수행하고 각각의 결과를 비교하였다. 실험모델은 직선운동 가이드에 설치된 2개의 질량과 하나의 전자기 액튜에이터를 이용하였다. 진동제어 방법으로서는 모우드 해석에 의한 제어, 스카이 훅 감쇠 제어, Viscous damping 제어 방법을 적용하였다. 본 연구의 목적은 이론해석 결과와 실험 결과를 비교하고 비슷한 제어효과에 대해서 에너지 소비가 작은 효율적인 제어방법을 찾는데 있다.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.303-309
• /
• 2017

The flexible AC transmission system (FACTS) provides a new advanced technology solution to improve the flexibility, controllability, and stability of a power system. The unified power flow controller (UPFC) is outstanding for regulating power flow in the FACTS; it can control the real power, reactive power, and node voltage of distribution networks. This paper investigates the performance of the UPFC for power flow control with a series of step changes in rapid succession in a power system steady state and the response of the UPFC to distribution network faults and islanding mode. Simulation was carried out using the MATLAB's simulink sim power systems toolbox. The results, which were carried out on a 5-bus test system and a 4-bus multi-machine electric power system, show clearly the effectiveness and viability of UPFC in rapid response and independent control of the real and reactive power flows and oscillation damping [6].

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.47-56
• /
• 1997

This paper presents the vibration control of an engine mount featuring an ER(electro-rheological) fluid. The Bingham properties of the ER fluid to be employed to the ER engine mount are experimentally obtained through Coeutte type viscometer. The ER engine mount is devised ant its governing equation is derived. After evaluating the performance of the ER engine mount on the basis of the mathematical model, the novel type of the ER engine mount is then designed and manufactured. The electric field-dependent transmissibility of the ER engine mount is evaluated by changing the particle concentration and the electrode gap size. To investigate the control performance of the ER engine mount, neuro-control algorithm is adopted. It is shown that the proposed ER engine mount has prominent capabilities of controlling the damping force by tuning the electric fields and excellent vibration isolation performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2274-2282
• /
• 2000

An MR(Magneto-Rheological) fluid damper is designed and applied to the semi-active suspension system of a 1/4 car model. The damping constant of the MR damper changes according to input current and the time delay of the damper is included in the system dynamics. The passive method, LQ control and Frequency shaped LQ control are compared in experiments. The advantage of the proposed frequency shaped LQ control is that the ride comfort improves in frequency range from 4 to 8Hz where human body is most sensitive and the driving safety improves around the resonance frequency of unsprung mass, 11Hz. The experiments using a 1/4 car model show the effectiveness of the algorithm.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.298-303
• /
• 2004

The active magnetic bearing system for a TMP consists of four couples of magnets, five gap sensors with its amplifiers and a digital PID controller. For stabilizing and providing damping, digital PID controller is applied for each control axes and the inter-axis cross feedback controller is also applied to suppress low frequency vibration caused by gyroscopic moment of the rotor. Therefore in this paper, a digital controller of magnetic bearing for a TMP is design and examined.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1602-1607
• /
• 2003

Vibration causes noise and sometimes makes structure unstable. Especially, due to the efforts of lightening, deformation of flexible structure is increased in its shape. Just a little disturbance can cause vibration and low damping ratio makes residual vibration last long time. This research is concerned with the model reference neuro-controller design for the vibration suppression of smart structures. By using a model reference neurocontroller, which is one of the algorithms of adaptive control, we performed an adaptive control of flexible cantilever plate and opened box structure with piezoelectric materials. The proposed adaptive vibration control algorithm, a model reference neuro-controller, was proved in its effectiveness by applying to an opened box structure. The model reference neuro-controller is implemented with DSP, and the real-time adaptive vibration control experiment results confirm that the model reference neuro-controller is reliable.

• Journal of Drive and Control
• /
• v.9 no.2
• /
• pp.1-7
• /
• 2012

본 연구의 목적은 에어 서스펜션 시스템의 제어 특성을 분석하는 것이다. 우선 에어 서스펜션 시스템의 수학적 모델을 구하였다. 그리고 퍼지 제어 알고리즘을 적용하여 반능동식 하이브리드 제어 에어 서스펜션을 구하였다. 차체 가속도에 따라 퍼지 제어기는 오리피스 개도를 변경하여 특정 영역에서 에어 스프링의 강도를 조정한다. 동시에 서스펜션 운동 상태에 따라 서스펜션 댐핑이 제어된다. 시뮬레이션 결과는 반능동식 하이브리드 제어 에어 서스펜션이 노면 접지능력의 상실이나 서스펜션 작동 공간의 증가 없이 최고의 승차감을 제공할 수 있음을 보여준다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.26-31
• /
• 1998

For the semiactive vibration control, a variable damper and proper control systems are essential. In this research, a controllable damper was designed using the MR fluids and its mechanical properties such as damping constant and response time were measured. Since the response time of the MR damper was much longer than nominal MR fluid response time, the time delay of the damper should be considered in the design of controllers. It is shown that the advanced On/Off vibration control which includes the damper time delay performs more effectively than the conventional one.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1170-1178
• /
• 2007

Repeated hardware tests and tuning, investing cost and time, are usually required to assure a satisfactory performance of the suspension seat. In this study, an EILS(ECU-in-the-loop) method was proposed to develop a controller for a semi-active suspension seat with a MR(magneto-rheological) damper. EILS system was developed using a real-time seat dynamics model communicating with ECU hardwares under a closed loop environment utilizing Matlab/Simulink and xPC $TargetBox^{TM}$. A sky-hook based control algorithm with optimized damping coefficients was verified to reduce the energy consumption and to improve the vibration response performance.