• 조명전기설비학회논문지
• /
• 제25권9호
• /
• pp.75-79
• /
• 2011

The MOV(Metal Oxide Varistor), a voltage limiting element, has been installed in the SPD(Surge Protective Device) or inside the internal circuit of an electronic appliance for protection of the electric power system and electronic device against electrical surge. Such an MOV is exposed, however, to the risk of the thermal runaway resulting from excessive voltage and deterioration. In this paper, a reciprocal action has been tested and analyzed using a phosphorus bronze switching module and the low-temperature solder. And a short current break characteristic test linked with the circuit breaker has been performed to limit the inrush current when the MOV breaks down. It has been proven that the phosphorus bronze switching module installed inside the internal circuit can improve the safety of the power line system and the electronic device.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.18-23
• /
• 2006

This paper presents an operator training simulator for power system restoration against massive blackout. The system is designed especially focused on the generality and convenient setting up for initial condition of simulation. The former is accomplished by using power flow calculation methodology, and PSS/E data is used to set up the initial state for easy setting. The proposed simulator consists of three major components-a power flow(PF), a data conversion(CONV), and, a GUI module. The PF module calculates power flow, and then checks over-voltages of buses and overloads of lines. The CONV module composes a Y-Bus array and a database at each restoration action. The initial Y-Bus array is composed from PSS/E data. A user friendly GUI module is developed including a graphic editor and a built-in operation manual. The maximum processing time for one step operation is 15 seconds, which is adequate for training purpose.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.586-591
• /
• 2012

군산 복합화력 발전소에서 운용중인 가스터빈 엔진의 정비 의사 결정을 지원하기 위한 솔루션을 개발하였다. 솔루션은 온라인 상태감시, 기간별 성능 경향분석, 최적 압축기 세정주기 분석, 고온부품 관리 모듈로 구성되어 있다. 운용자가 엔진의 상태 분석 결과를 쉽게 모니터하고 그에 따른 정비의사를 결정할 수 있도록 GUI 플랫폼을 적용하였다. 온라인 상태감시 모듈에서는 기준 성능 대비 실시간 계측데이터의 차이를 분석하여 엔진의 성능저하율을 가시적으로 제시한다. 최적 압축기 세정주기 분석 모듈에서는 경제성 평가 알고리즘을 통해 정비 소요 비용과 성능 저하에 따른 비용 손실의 분석을 통해 순이익이 최대가 되는 세정주기를 제시한다. 엔진의 상태 및 주요 정보를 종합적으로 분석하여 제공함으로써 최적 정비 및 운용이 가능하도록 의사 결정을 지원한다.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제25권3호
• /
• pp.203-218
• /
• 2018

An old result of Whitehead says that the set of derivations of a group with values in a crossed G-module has a natural monoid structure. In this paper we introduce derivation of crossed polymodule and actor crossed polymodules by using Lue's and Norrie's constructions. We prove that the set of derivations of a crossed polygroup has a semihypergroup structure with identity. Then, we consider the polygroup of invertible and reversible elements of it and we obtain actor crossed polymodule.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.295-299
• /
• 2007

Biped robot requires that an energy source and a control part should be installed on the body to realize active system. So, we choose the DC motor having high torque in compact size in this study. In the DC motor serve system, we choose power amplifier with analog configuration, developed the module combined the controller and the driver. We applied this module to robot actuator and studied the response characteristics in an action and a return. Main controller with serve system, loading PIC micro controller, can be load on the robot with light weight.

• 동굴
• /
• 제87호
• /
• pp.8-13
• /
• 2008

The automatic firewall block and fire alarm system was embodied by using gas circuit and wireless communication equipment, using a smoke sensor (ST-QA1A) and RF Module. OR-CAD was also used for testing circuit system and experiment circuit after assembling circuit. As a result in experiment, the gas sensor detected well an imaginary smoke and worked reliably for driving action of firewall block motor and wireless warning alarm. Through the smoke sensitive perception from the fire, the warning alarm and the preventing fire propagation from the specific closed region were verified reliably. The gas sensor and RF module for firewall and fire alarm system were actually available.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.21-31
• /
• 1998

This study described computer aided die design system for cold forging of non-axisymmetric parts. To design the die of cold forging. an integrated approach based on a rule-base system and commercial F. E. code were adopted. This system is implemented on the personal computer and its environment is a commercial CAD package named as AutoCAD. The system includes four modules. In the initial data input module, the variables which are necessary to design of die are inputted by user and die material are selected from the database. In the analysis and redesign module, stress distrubution action on the designed die is analyzed by commercial FEM code NISA II. The designed die is modified to prevent failure in both states of stress free and pressurizing. The developed system provides powerful capabilities for die design of non-axisymmetric parts.

• Current Photovoltaic Research
• /
• 제8권2호
• /
• pp.54-59
• /
• 2020

Within the IEA (International Energy Agency) PVPS (Photovoltaic Power System) Programme Task 15, 'Enabling Framework for the Acceleration of BIPV,' a round-robin action focusing on the performance of vertical BIPV elements as a facade in different climatic environments was performed. The performance of identical (both, in construction and bill of materials (BOM)) glass-to-glass c-Si BIPV elements was monitored at seven outdoor test sites in 6 different countries in Europe and Asia. In this work, the comprehensive results of the electrical and corresponding meteorological data will be presented and discussed. The monitored data were merged, processed, and filtered for further analysis. The analysis includes the chracteristics of the module temperatures and the in-plane irradiation at the outdoor test locations, mean daily PR per test module, time series of mean daily performance ratio coefficients, and monthly yield.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.321-326
• /
• 2023

The purpose of this study is to create and present a formalized module of ISP (Information Strategy Plan), a smart factory consulting method that is helpful to companies or consultants who will build smart factories. Order of study is First, the theoretical research direction is established through the investigation of related papers. Second, ISP policy research practices are compared to derive practical implementation methods. Third, in order to derive a standardized module method related to the final smart factory ISP, related cases of the government and individuals are compared. As a result of previous research, ISP (Information Strategy Planning), a consulting methodology, is similar to Deming's PDCA, and is regarded as Plan (environment and current status analysis), Do (establishment of future model goals), Check (establishment of implementation plan), and Act (follow-up management). As a result of the study, we obtained the following results. The first step is to analyze the current status and identify the purpose of introduction and problems in plant operation. In the second step, establish a consulting plan and derive a proposal description, strategic task, and master plan. Step 3 establishes detailed action plans, evaluates consulting outputs and consulting, and reports performance. Step 4 is established as follow-up management consulting. The limitation of the study is that although related data were compared to develop the consulting methodology into a standardized module, FGI analysis through experts or Delphi survey were not conducted, so there is a limit to the reliability of the mapping results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2333-2337
• /
• 2007

The practical studies on the method of particle contamination control for yield enhancement in the cleanroom were carried out. The method of the contamination control was considered, which is composed of data collection, data analysis, improvement action, verification, and implement control. The composition analysis for data collection and data analysis was used in the cellular phone module packaging lines. And this method was evaluated by the variation of yield loss between before and after improvement action. In case that the composition analysis was applied, the critical sources were selected and yield loss reduction through improvement actions was also investigated. From these results, it is concluded that the composition analysis is effective solutions for particle contamination control in the cleanroom.