• 대한조선학회논문집
• /
• 제57권2호
• /
• pp.88-95
• /
• 2020

There have been many attempts to predict resistance of vessels in ice floe environment, but they mostly have both strong and weak points at the same time; for instance, simplified formulas are very fast but less flexible to types of ship and ice conditions and other numerical techniques need high computing cost for increased accuracy. A new numerical simulation technique of combining explicit finite element analysis code with a user-subroutine to control real-time forces acting on ice floes was proposed, thereby it was possible to predict ship-to-ice floe resistance with higher convenience and accuracy than other proposed approaches. The basic theory on how real-time hydrostatic and hydrodynamic forces acting on ice floes could be generated using user-subroutine was explained. The heave motion of a single ice floe was simulated using the user-subroutine and the motion amplitudes and periods were almost consistent with analytic values. Towing tests of an icebreaker model ship were simulated using explicit finite element analyses with the user-subroutine. The ice-induced resistance obtained from the towing experiments and simulations showed significant differences. Intentional increase of the drag coefficient to increase the contact duration between the ice floes and rigid model ship leaded the total resistance to be substantially consistent between the model tests and numerical simulations.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.45-59
• /
• 2018

The bi-material elastic system consisting of the pre-stressed hollow cylinder and pre-stresses surrounding infinite elastic medium is considered and it is assumed that the mentioned initial stresses in this system are caused with the compressing or stretching uniformly distributed normal forces acting at infinity in the direction which is parallel to the cylinder's axis. Moreover, it is assumed that on the internal surface of the cylinder the ring load which moves with constant velocity acts and within these frameworks it is required to determine the influence of the aforementioned initial stresses on the critical velocity of the moving load. The corresponding investigations are carried out within the framework of the so-called three-dimensional linearized theory of elastic waves in initially stresses bodies and the axisymmetric stress-strain state case is considered. The "moving coordinate system" method is used and the Fourier transform is employed for solution to the formulated mathematical problem and Fourier transformation of the sought values are determined analytically. However, the originals of those are determined numerically with the use of the Sommerfeld contour method. The critical velocity is determined from the criterion, according to which, the magnitudes of the absolute values of the stresses and displacements caused with the moving load approaches an infinity. Numerical results on the influence of the initial stresses on the critical velocity and interface normal and shear stresses are presented and discussed. In particular, it is established that the initial stretching (compressing) of the constituents of the system under consideration causes a decrease (an increase) in the values of the critical velocity.

• Wind and Structures
• /
• 제32권2호
• /
• pp.127-142
• /
• 2021

Wind load acting on a standalone structure is different from that acting on a similar structure which is surrounded by other structures in close proximity. The presence of other structures in the surrounding can change the wind flow regime around the principal structure and thus causing variation in wind loads compared to a standalone case. This variation on wind loads termed as interference effect depends on several factors like terrain category, geometry of the structure, orientation, wind incident angle, interfering distances etc., In the present study, a three building configuration is considered and the mean pressure coefficients on each face of principle building are determined in presence of two interfering buildings. Generally, wind loads on interfering buildings are determined from wind tunnel experiments. Computational fluid dynamic studies are being increasingly used to determine the wind loads recently. Whereas, wind tunnel tests are very expensive, the CFD simulation requires high computational cost and time. In this scenario, Artificial Neural Network (ANN) technique and Support Vector Regression (SVR) can be explored as alternative tools to study wind loads on structures. The present study uses these data-driven approaches to predict mean pressure coefficients on each face of principle building. Three typical arrangements of three building configuration viz. L shape, V shape and mirror of L shape arrangement are considered with varying interfering distances and wind incidence angles. Mean pressure coefficients (Cp mean) are predicted for 45 degrees wind incidence angle through ANN and SVR. Further, the critical faces of principal building, critical interfering distances and building arrangement which are more prone to wind loads are identified through this study. Among three types of building arrangements considered, a maximum of 3.9 times reduction in Cp mean values are noticed under Case B (V shape) building arrangement with 2.5B interfering distance. Effect of interfering distance and building arrangement on suction pressure on building faces has also been studied. Accordingly, Case C (mirror of L shape) building arrangement at a wind angle of 45º shows less suction pressure. Through this study, it was also observed that the increase of interfering distance may increase the suction pressure for all the cases of building configurations considered.

• 지질공학
• /
• 제7권2호
• /
• pp.91-99
• /
• 1997

불연속성암반을 수치해석하는 방법으로 여러 가지 모델들이 제안되었다. 따라서 실제 구조물 설계에 적용함에 있어서 많은 혼란이 야기될 수도 있어 이들 모델들의 비교.검토에 대한 연구가 필요하게 되었다. 암반을 모델링하는 방법은 암석과 불연속면을 개별로 취급하는 방법과 의사연속체(疑似連續 )로 취급하는 등가연속체(等價連續 ) 모델링 등 크게 두가지로 구분할 수 있다. 본 연구에서는 후자의 등가연속체 모델 즉 (1) 크랙텐서모델, (2) 등가체적 결손 모델, (3) 손상모델, (4) 미소구조모델 (병렬모델 및 직렬모델), (5) 규질화모델 등을 서로 비교하였다. 이들 모델 대부분은 주로 대표요소용적상에서의 불연속면에 기인한 변형율 및 응력장을 다루고 있었다. 마지막으로 크랙을 포함하는 세벤트몰타르 공시체를 사용한 실내시험 결과와 비교하므로서 이들 모델의 특성을 명확히 하였다.의 특성을 명확히 하였다.

• 한국철도학회논문집
• /
• 제8권4호
• /
• pp.348-353
• /
• 2005

In designing the structures of railway rolling stocks, deterministic methods associated with the concept of a safety factor have been traditionally used. The deterministic approaches based on the mean values of applied loads and material properties have been used as safety verification for the design of rolling-stock car body structures. The uncertainties in the applied loading for the high speed train and the strength of new materials in the rolling stocks require the application of probabilistic approaches to ensure fatigue safety in the desired system. Pressure loadings acting on the car body when the train passes through tunnels show reflected pressure waves for high-speed trains and they may cause a fatigue failure in vehicle bodies. Use of new material technology as body structures also introduces uncertainties in the material strength. A probabilistic approach is more adaptable in designing reliable structures when the pressure waves from the tunnels pounds and new material technology is adopted. In this paper, it is proposed that a fatigue design and assessment method based on a reliability which deals with the loading variations on a railway vehicle due to the pressure reflected in tunnels and the strength variations of material. Equation for the fatigue reliability index has been formulated to calculate the reliability assessment of a vehicle body under fluctuating pressure loadings in a tunnel. Considered in this formulation are the pressure distribution characteristics, the fatigue strength distribution characteristics, and the concept of stress-transfer functions due to the pressure loading.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.335-343
• /
• 2017

The Newman-Raju formula and contour integral-based finite element analyses(FEAs) have been widely used to assess crack growth rates and residual lives at crack locations in ships or offshore structures, but the Newman-Raju formula is known to be less accurate for the complicated weld details and the conventional FEA-based contour integral approach needs concentrated efforts to construct FEA models. Recently, an extended finite element method(XFEM) has been proposed to reduce those modeling efforts with reliable accuracy. Stress intensity factors(SIFs) from the approaches such as the Newman-Raju formula, conventional FEA-based J-integral, and XFEM-based J-integral were compared for an infinitely long plate with a propagating elliptic crack. It was concluded that the XFEM approach was far reliable in terms of prediction ability of SIFs. Assuming a 25 year-aged coast guard patrol ship had the prescribed cracks at the bracket toes attached to longitudinal stiffeners in way of deck and bottom, SIFs were derived based on the three approaches. To obtain axial tension loads acting on the longitudinal stiffeners, long term hull girder bending moments were assumed to obey Weibull distribution of which two parameters were decided from a reference (DNV, 2014). For the complicated weld details, it was concluded that the XFEM approach could cost-effectively and accurately estimate the crack growth rates and residual lives of ship structures.

• 한국지반공학회논문집
• /
• 제24권5호
• /
• pp.27-35
• /
• 2008

신뢰성 설계를 위한 설계변수의 특성치에 대하여 국내 해양토질을 이용하여 연구하였다. 특성치 산정에 대한 연구결과, Student/Ovesen, Schneider 및 EN 1990 방법의 순으로 평균치에 근접한 것으로 나타났고, EN 1990 방법은 지반특성치 산정방법의 신뢰성 차원에서 부적합한 것을 확인하였다. 그리고 제시된 네가지 특성치 산정방법은 토질의 변동성이 커짐에 따라 특성치를 보수적으로 평가하는 경향을 보였다. 또한 이러한 산정된 특성치가 실 설계에 미치는 영향을 파악하기 위하여 방파제에 대하여 임의 하중하에서 미개량 지반의 지지력 및 침하특성을 검토하였다. Schneider 방법을 이용하여 산정한 결과와 토질정수의 산술평균치를 이용한 결과를 비교한 결과, 허용지지력/작용하중비의 경우 전자가 후자의 65%로 나타났고, 침하량의 경우에는 13.6%를 제시하여 과소평가한 결과였다. 그리고 과거 설계사례에서 산술평균치로 결정된 대표치에 의한 것과 본 논문에서 각 지역의 자료로부터 산정한 특성치에 따른 설계결과를 비교한 결과, 산술평균치로 결정된 대표치에 의한 설계는 대부분 과대평가의 결과를 제시하였다.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1072-1078
• /
• 2002

The constrained motion requires the determination of constraint force acting on unconstrained systems for satisfying given constraints. Most of the methods to decide the force depend on numerical approaches such that the Lagrange multiplier method, and the other methods need vector analysis or complicated intermediate process. In 1992, Udwadia and Kalaba presented the generalized inverse method to describe the constrained motion as well as to calculate the constraint force. The generalized inverse method has the advantages which do not require any linearization process for the control of nonlinear systems and can explicitly describe the motion of holonomically and/or nongolonomically constrained systems. In this paper, an explicit equation to describe the constrained motion is derived by minimizing the performance index, which is a function of constraint force vector, with respect to the constraint force. At this time, it is shown that the positive-definite weighting matrix in the performance index must be the inverse of mass matrix on the basis of the Gauss's principle and the derived differential equation coincides with the generalized inverse method. The effectiveness of this method is illustrated by means of two numerical applications.

• 한국산업융합학회 논문집
• /
• 제5권1호
• /
• pp.65-74
• /
• 2002

This paper intends to investigate such effects through experiments. The contents of the investigation are effects of position of repeated loading and unloading, passing frequency. For the purpose of the investigation an experimental load-deflection system is developed and the system is possible to measure deflection of the wall and earth pressure due to different size of strip loading and cyclic loading. The findings from the experiments are as follows: 1. As repeated loading approaches to the wall, the measured horizontal residual earth pressure agrees well with Rowe's empirical formula, while as the loading is far from the wall the earth pressure consists with Boussinesq's and Spangler's formulas. Also it is found that below 0.6m depth from ground surface the effects of repeated loading can be nearly neglected. 2. From comparison analyses of earth pressure theories and experimental results, a reagression equation is suggested herein, and earth pressure at any depth and maximum earth pressure due to cyclic loading can be estimated from the equation.

• 대한가정학회지
• /
• 제26권1호
• /
• pp.137-149
• /
• 1988

In this study a series of approaches have been made to find out how complaining behavior would show according to the conviction in the locus of control as to where the general contents dissatisfied by consumers and the dissatisfied consumers would place the responsibility for the consequence of behavior and to test the difference of complaining behavior pursuant to demographic variables and the complaining behavior. The results of this study are described as follows: 1. The consumers have largely attributed the locus of responsibility for their dissatisfaction following the purchase of refrigerators to the relevant manufacturers, advertizers, consumer(herself) and distributors, and as for the dissatisfaction by an attribute of refrigerator, a high level of dissatisfaction was revealed on the price and items of properties. 2. There was no difference in the complaining behavior of consumers pursuant to the demographic features. 3. It was revealed that there wee many consumers, among those respondents to questionnaires, who have actually shown their complaing behavior, while most of them would act inthe form o private behavior, because the cases of acting positive way of public behavior, even though they were apt to show complaining behavior, appears to be extremely rare. 4. A significant difference was shown in the complaing behavior pursuant to the conviction in the locus of control.