• 폴리머
• /
• 제30권6호
• /
• pp.550-555
• /
• 2006

잉크젯프린터용 잉크가 수성화되어 감에 따라 전용 인화지에 사용되는 코팅제 역시 수성 코팅제가 사용되고 있는 추세이다. 이 수성 코팅제에 사용되는 재료를 살펴보면 안료로는 알루미나솔, 주 바인더로 폴리 (비닐 알콜), 부족한 물성을 향상시키기 위해 고분자 첨가제를 사용한다. 된 연구에서 사용된 고분자 첨가제는 스티렌과 부틸아크릴레이트를 기본으로 하구 메타크릴산, 아크릴산, 아크릴 아미드 단량체들을 조합하여 에멀션 중합법으로 합성하였다. 중합시 비이온 및 음이온 유화제를 혼합 혹은 단독으로 사용하고, 단량체 조합과 고분자 첨가제의 입자구조를 변화시켜 흡수성, 퍼짐성, 광학밀도의 인쇄적성과 광택도 내수성 등의 변화를 살펴보았다. 이 결과, 음이온 유화제나 카복실기를 가지는 아크릴산 같이 음이온성이 큰 물질을 사용한 경우 알루미나 솔과의 상용성에서 문제를 야기하였고 아크릴 아미드는 인쇄적성에서 뛰어난 결과를 얻었지만 광택도가 떨어지는 경향을 알 수 있었다. 메타크릴산이 함유된 경우 광택도는 향상되었지만 인쇄적성이 떨어졌다.

• Tribology and Lubricants
• /
• 제19권4호
• /
• pp.203-210
• /
• 2003

In order to enhance the thermal stability of binder materials of bonded type solid lubricants, several metal-alkoxide based sol-gel materials such as methyltrimethoxysilane(MTMOS), titaniumisopropoxide (Ti(Opr$\^$i/)$_4$), zirconiumisopropoxide (Zr(Opr$\^$i/)$_4$) and aluminumbutoxide (Al(Obu$\^$t/)$_4$) were modified chemically by both epoxy and acrylic silane compounds. Friction and wear characteristics of the bonded solid lubricants, whose binders were of several hybrid ceramic materials, were tested with a reciprocating tribo-tester. Wear life was evaluated with respect to the heat-curing temperature, friction temperature, type of supplement lubricants, and ratio of binder materials. Test results showed that the Si-Zr hybrid ceramic materials modified by epoxy-silane compounds had a higher wear life compared to others. Sb$_2$O$_3$ was the most effective supplement lubricants in the high temperature, and BUS analyses revealed that it was caused mainly by a strong anti-oxidation effect to MoS$_2$ particles. The higher heat-curing temperature resulted in the higher wear life, and the higher friction temperature resulted in the lower wear life.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.131-138
• /
• 2019

To improve the performance of Si anodes in advanced Li-ion batteries, the design of the electrode plays a critical role, especially due to the large volumetric expansion in the Si anode during Li insertion. In our study, we used a simple fabrication method to prepare Si-based electrodes by grafting polyacrylic acid (PAA) to a carboxymethyl cellulose (CMC) binder (CMC-g-PAA). The procedure consists of first mixing nano-sized Si and the binders (CMC and PAA), and then coating the slurry on a Cu foil. The carbon network was formed via carbonization of the binders i.e., by a simple heat treatment of the electrode. The carbon network in the electrode is mechanically and electrically robust, which leads to higher electrical conductivity and better mechanical property. This explains its long cycle performance without the addition of a conducting agent (for example, carbon). Therefore, the partially carbonized CMC-g-PAA binder presented in this study represents a new feasible approach to produce Si anodes for use in advanced Li-ion batteries.

• Corrosion Science and Technology
• /
• 제22권6호
• /
• pp.447-456
• /
• 2023

In this work, we performed a comparative study examining two coatings on Ti Gr.1 for use in fuel cell bipolar plates. The coatings consisted of carbon black as the conductor along with acrylic polymer and Ti Sol-Gel binder as the binder. Ti Sol-Gel that had precipitated as TiO₂ in areas impregnated between carbon black gaps, thereby acting as a binder for carbon black and serving as a polymer coating. Neither of the coatings peeled off during the 90° bend test to check formability. The contact resistance of the TiO₂ coating was found to be lower than that of the polymer binder coating. Moreover, due to coating shrinkage (denser) that occurred during the heat treatment process, the TiO₂ binder coating showed almost the same level of corrosion resistance, as measured by potentiostatic and EIS tests, despite being thinner than the polymer coating. However, both the polymer binder coating and the TiO₂ binder coating had many pores and irregularities internally (around 10 ~ 100 nm) and on the surface (0.1 ~ 2 ㎛). We considered that these pores and irregularities contributed to the lower corrosion resistance.

• 폴리머
• /
• 제34권4호
• /
• pp.306-312
• /
• 2010

Triphenylvinylsilane (TPVS) containing vinyl acetate (VAc), butyl acrylate (BA), and Nmethylolacrylamide (NMA) copolymers were prepared by emulsion polymerization. The polymerization was performed at $80^{\circ}C$ in the presence of auxiliary agents and ammonium peroxodisulfate (APS) as the initiator. Sodium dodecyl sulphate (SDS) and Arkupal N-300 were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and dynamic light scattering (DLS). Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of silicone concentrations on the properties of the TPVS-containing VAc-acrylic emulsion copolymers were discussed. The obtained copolymers have high solid content (50%) and can be used in weather resistant emulsion paints as a binder.

• 폴리머
• /
• 제25권3호
• /
• pp.349-358
• /
• 2001

고내후성 시릴기를 함유하는 아크릴수지 도료를 제조할 목적으로, 먼저 아크릴수지를 단량체 n-butyl methacrylate, methyl methacrylate, n-butyl acrylate 및 3-methacryloxypropyl-trimethoxysilane (MPTS)을 사용하여 이들을 부가중합시켜 얻었다. 아크릴 공중합체의$T_g$를 $20^{\circ}C$로 조정하면서 MPTS 함량을 10, 20, 30wt%로 변화시켜 합성하였다. 아크릴수지 합성에서 실리콘 성분인 MPTS 양이 많아질수록 점성도가 저하되었으며, 고온에서의 열적 안정성은 향상되었다. 한편 합성된 아크릴수지를 백색안료와 블렌드하여 도료를 제조한 후 도막물성을 시험한 결과, 여러 가지 피도물에 대하여 우수한 접착력을 보였고 기타의 물성들도 대체로 좋게 나타났다. 내후성 시험은 옥외폭로시험, WOM 및 QUV의 3종류로 하였는데, 각종 측정 수치로 보아 MPTS 함량 30wt%인 아크릴수지 도료는 고내후성 도료임이 확인되었다.

• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.521-526
• /
• 2004

The fragrant fabrics are prepared by the attaching microcapsules using acrylic binder. To improve the handle of fragrant fabrics, pretreatment by softener is suggested. The durability of fragrant fabrics and the change of their handle are investigated. It is carried out One-way ANOVA and Duncan test to determine bending properties, shear properties, surface properties of untreated, SO-MC and BI-MC by Kawabata system. BI-MC shows significant differences in B and 2HB. SO-MC shows significant differences in G and 2HG. It turned out the pretreatment by softener mitigated the effect of binder and makes fabrics softer than untreated fabrics.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.411-412
• /
• 2006

Photopolymers have been of considerable due to their easy of processing and high sensitivity. Exposure of photopolymers to optical source produce recroding mark where the light initiates a photoreaction that occurs preferentially in regions of high illumination. The photoreaction typically involves polymerization of an acrylic or epoxy monomer dispersed together with a photoinitiators in a polymeric binder. A number of photopolymerizable materials have been developed to apply them in 3D optical recording such as holographic or 3-dimensional data storage. In this presentation, photopolymers derived from sol-gel matrix and transparent polymer binder are summarized. The effect of monomer composition and plasticizers on optical recording will be discussed based on the monomer transport during the photopolymerization.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.695-704
• /
• 1992

In (Pb, La)(Zr, Ti)O3 ceramic system, the functionally gradient material (FGM) was developed, and its processing and properties were investigated. The FGMs were successfully prepared through doctor blade method with acrylic binder system as well as mold stacking press method. The ultrasonic treatment was very effective for particle dispersion in slurry, and it lead to form clack-free green films. The strain-voltage characteristics of the FGM system was significantly improved which fabricated between a high piezoelectric-low dielectric and a low piezoelectric-high dielectric composition layer.

• 공업화학
• /
• 제17권4호
• /
• pp.397-402
• /
• 2006

TFT-LCD TV용 백라이트 유니트(BLU)의 각 구성성분이 최종 광확산필름의 물리적, 전기적, 열적, 광학적 특성에 미치는 영향에 관하여 고찰하였다. 블로킹 방지층에 있어서는 $6{\mu}m$의 아크릴 비드를 0.5~1.5 wt%로 첨가했을 때 블로킹 방지성이 우수하였고, 4급 암모니움 염을 0.8 wt%로 첨가하였을 경우 Decay-Time 및 수분에 대한 안정성이 가장 우수한 결과를 나타내었다. 광확산층에 있어서는 아크릴 폴리올을 바인더 수지로서 사용하고, 무황변 타입의 HDI계 경화제를 바인더 수지에 대해 30~35 wt%로 첨가하였을 경우가 PET 필름 표면상에의 접착력, 경화속도 및 유연성 측면에서 가장 우수한 결과를 보였다. 또한 $20{\mu}m$의 다분산형 폴리스티렌($20{\mu}m$ PS) 및 폴리메틸메타크릴레이트($20{\mu}m$ PMMA) 비드를 바인더 수지 대비 250 wt%로 첨가하였을 경우에 가장 높은 법선휘도값을 얻을 수 있었으며, PS 입자를 사용했을 경우보다는 PMMA 입자를 사용했을 경우가 투과율 차이로 인해 더 높은 법선휘도값을 나타내었다.