• 제목/요약/키워드: Acrylic Acid

검색결과 554건 처리시간 0.032초

Bioconversion of Acrylonitrile to Acrylic Acid by Rhodococcus ruber Strain AKSH-84

  • Kamal, Ahmed;Kumar, M. Shiva;Kumar, C. Ganesh;Shaik, Thokhir Basha
    • Journal of Microbiology and Biotechnology
    • /
    • 제21권1호
    • /
    • pp.37-42
    • /
    • 2011
  • A new versatile acrylonitrile-bioconverting strain isolated from a petroleum-contaminated sludge sample and identified as Rhodococcus ruber AKSH-84 was used for optimization of medium and biotransformation conditions for nitrilase activity to produce acrylic acid. A simple and rapid HPLC protocol was optimized for quantification of acrylic acid, acrylamide, and acrylonitrile. The optimal medium conditions for nitrilase activity were pH of 7.0, temperature of $30^{\circ}C$, agitation of 150 rpm, and inoculum level of 2%. Glycerol as a carbon source and sodium nitrate as the nitrogen source provided good nutritional sources for achieving good biotransformation. Nitrilase activity was constitutive in nature and was in the exponential growth phase after 24 h of incubation under optimal conditions without addition of any inducer. The substrate preference was acrylonitrile and acetonitrile. The present work demonstrates the biotransformation of acrylonitrile to acrylic acid with the new strain, R. ruber AKSH-84, which can be used in green biosynthesis of acrylic acid for biotechnological processes. The nitrilase produced by the isolate was purified and characterized.

Chitosan/Poly(acrylic acid-co-crotonic acid) Semi-IPN의 합성, 분석 및 팽윤거동 (Synthesis, Characterization and Swelling Properties of Chitosan/Poly(acrylic acid-co-crotonic acid) Semi-Interpenetrating Polymer Networks)

  • Hosseinzadeh, Hossein;Alijani, Darioush
    • 폴리머
    • /
    • 제38권5호
    • /
    • pp.588-595
    • /
    • 2014
  • A semi-interpenetrating polymer network (semi-IPN) hydrogel composed of crosslinked chitosan and poly (acrylic acid-co-crotonic acid) was prepared in the presence of glutaraldehyde (GA) as a crosslinker. Fourier-transform infrared, thermogravimetric analysis and scanning electron microscopy were employed to confirm the structure of the semi-IPN hydrogel. The swelling capacity of hydrogel was shown to be affected by the monomers weight ratio, chitosan content, initiator and GA concentrations. The results also indicated that the semi-IPN hydrogel had different swelling capacity at various pHs. Additionally, the swelling behavior of the hydrogel was investigated in aqueous solutions of NaCl, $CaCl_2$, and $AlCl_3$.

아크릴릭산의 연소특성치의 신뢰성 연구 (A Study on the Reliability of the Combustible Properties for Acrylic Acid)

  • 하동명
    • 에너지공학
    • /
    • 제24권3호
    • /
    • pp.20-26
    • /
    • 2015
  • 아크릴릭산 연소특성치의 신뢰도를 살펴보기 위해, 폭발한계에 대해서는 문헌을 통해 고찰하였고, 인화점과 발화지연시간에 의한 발화온도를 측정하였다. 그 결과, Setaflash와 Pensky-Martens 밀폐식 장치에 의한 아크릴릭산의 하부인화점은 $48^{\circ}C$$51^{\circ}C$로 측정되었으며, Tag와 Cleveland 개방식에서는 $56^{\circ}C$로 측정되었다. ASTM E659 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 아크릴릭산의 최소자연발화온도는 $417^{\circ}C$로 측정되었다. 측정된 하부인화점과 상부인화점에 의한 폭발하한계는 2.2 Vol%, 상한계는 7.9 Vol%로 계산되었다.

Investigation of acrylic/boric acid composite gel for neutron attenuation

  • Ramadan, Wageeh;Sakr, Khaled;Sayed, Magda;Maziad, Nabila;El-Faramawy, Nabil
    • Nuclear Engineering and Technology
    • /
    • 제52권11호
    • /
    • pp.2607-2612
    • /
    • 2020
  • The present work was aimed to show the possibility of using hydrogel (acrylic/boric acid) for evaluation of the neutron radiation shielding. The influence of acrylic acid concentration, different gamma doses and relative contents of boric acid were studied. The physical properties and the thermomechanical stability of the studied samples were investigated. The shielding property of the composite for neutron was tested by Pu-Be neutron source (5 Ci) under room temperature. The neutron fluence rates and gamma fluxes were measured using a stilbene organic scintillator. The macroscopic effective removal cross-section ΣR (cm-1) of fast neutrons and total attenuation coefficient μ (cm-1) of gamma rays has been studied experimentally. The transmission parameters, the relaxation length (??) and the half-value layer (HVL) were obtained. The obtained results indicated that the addition of boric acid to acrylic acid tends to increase the macroscopic effective removal cross-section ΣR (cm-1) to 0.141 compared to 0.094 of ordinary concrete.

광반응성 poly(acrylic acid)를 이용한 Lumbrokinase 의 polyurethane 표면 고정화 방법에 관한 연구 (Immobilization of Lum,brokinase on the Surface of Polyurethane by using the Photoreactive Poly(acrylic acid))

  • 김현정;류은숙;김종원;민병구
    • 대한의용생체공학회:의공학회지
    • /
    • 제20권6호
    • /
    • pp.547-553
    • /
    • 1999
  • 생체재료로 사용되는 polyurethane(PU) 표면에 항혈전성 lumbrokinase(LK)를 고정함으로써 생체적합성을 향상시키고자하였다. 먼저 LK를 PU 표면에 고정하기 위한 가교제로서 4-azidoaniline hydrochloride와 poly(acrylic acid)를 이용하여 4-azidophenyl 작용기가 amido 결합으로 치환된 수용성, 광반응성 poly(acrylic acid)(PPa-II)를 합성하였다. H-nuclear magnetic reasonance spectrum(500MHz H-NMR)의 6-7 peak와 infrared spectrum (FT-IR) 의 2125.48 cm peak으로부터 PPA-II의 합성을 지원하였다. EH한 4-azidophenyl 작용기가 poly(acrylid acid) 잔기에 치환된 정도는 UV/VIS adpectrophotometric spectrum을 확인한 결과 11~14%임을 알 수있었다. 0.5 1및 5% PPA-II를 각각 광반응하여 얻은 PU는 39.5, 161.8 및 181.5 nmole/$\textrm{cm}^2$의 농도로 표면에 carvoxyl 작용기가 유도되었음을 알 수있었다. 0.05M KH2PO4 (pH 4.5) 용액에서 1-ethyl-3-(3-(dimethylamino)propyl)carbodiimide(EDC)를 촉매로 사용하여 LK를 PU표면에 amido 공유결합으로 고정하였으며, 이것은 지속적인 fibrinolytic 활성도를 보였다. PPA-II를 이용한 표면 개질 방법은 수용성 반응조건에서 이루어진다는 점과 광반응을 이용함으로써 특정부위에서의 표면개질이 가능하다는 점에서 그 응용가치가 크며 아울러 PU의 생체적합성을 향상시킬 수 있는 방법으로서 판단된다.

  • PDF

Corona방전처리에 의한 PVC film의 대전방지가공 (Antistatic Finishing of PVC Film Treated with Corona Discharge)

  • 허만우;이창재;김성일;강인규;이두현;양희삼;김삼수
    • 한국염색가공학회지
    • /
    • 제10권3호
    • /
    • pp.43-49
    • /
    • 1998
  • Polyvinyl chloride (PVC) sheets were treated with corona discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PVC surfaces were subsequently used as initiators for the graft polymerization of acrylic acid or acrylamide in an aqueous solution. Introduction of acrylic acid and acrylamide on the PVC sheet could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. The water contact angle$(90^\circ)$ of PVC sheet was constant, irrespective of time, while corona-treated and functional monomer-grafted PVCs were slowly increased with time, showing the rearrangement of surface polar groups in air condition. The water contact angle of PVC sheet$(90^\circ)$ was decreased by corona treatment$(78^\circ)$, and further decreased by the grafting of acrylic acid$(55^\circ)$ and acrylamide$(56^\circ)$ , indicating increased hydrophilicity of the modified surfaces. The half-life periods of surface voltage on acrylic acid- (62 sec) and acrylamide-grafted PVC (147sec) were significantly decreased when compared to those on PVC (3,115 sec) and corona-treated PVC (463sec). These results mean that acrylic acid- and acrylamide-grafted PVCs could be used as the antistatic sheets.

  • PDF

New Water-soluble Cutting Fluids Additives Derived from the Thermal Reaction Products of Unsaturated Fatty Acids with Acrylic Acid and Maleic Anhydride

  • Watanabe, Shoji
    • 한국응용과학기술학회지
    • /
    • 제20권4호
    • /
    • pp.372-376
    • /
    • 2003
  • Water-soluble cutting fluids are used for processing of aluminium materials. This short article describes properties of new additives of water-soluble cutting fluids for aluminium materials. Various Diels-Alder adducts of unsaturated fatty acids with acrylic acid of maleic anhydride were prepared by thermal reactions. Triethanolamine salts of Diels-Alder adducts of dehydrated castor oil fatty acids with acrylic acid or maleic anhydride showed excellent anti-corrosion property of aluminium materals. These thermal adducts showed anti-rust property for cast-iron chips, too.

Acid-free 아크릴계 점착제의 접착 물성 및 경화거동 연구 (Adhesion Performance and Curing Behaviors of Acid-free Acrylic PSAs Using Two Types of Curing Agents)

  • 이승우;박지원;권영은;김현중
    • 접착 및 계면
    • /
    • 제12권2호
    • /
    • pp.67-72
    • /
    • 2011
  • Acrylic pressure-sensitive adhesives are used in many different parts in the world. But acrylic acid in PSAs may occur unexpected results such as corroding adherends or producing by-products when applied within electronic devices. This study employed acrylic PSAs based on 2-ethylhexyl acrylate (2-EHA), 2-hydroxyethyl acrylate (2-HEA) and butyl acrylate (BA) with different coating thickness. There are two types of curing agents. One is methylaziridine derivative (MAZ) and the other is aluminum acetylacetonate (AlACA). This study examined the adhesion performance and curing behaviors using peel strength, probe tack and gel fraction. Also, the viscoelastic properties of acrylic PSAs were investigated from Advanced rheometric expansion system (ARES).

Poly(ethylene oxide)/Poly(styrene-co-acrylic acid) Blends의 등온 결정화 속도에 관한 연구 (Kinetics of Isothermal Crystallization in Poly(ethylene oxide) and Poly(styrene-co-acrylic acid)Blends)

  • 이상철;이무성;조원호
    • 한국재료학회지
    • /
    • 제1권3호
    • /
    • pp.151-155
    • /
    • 1991
  • 시차주사 열분석기를 이용하여 poly(ethylene oxide)(PEO)/poty(styrene-co-acrylic acid) (SAA) blonds에 대한 등온 결정화 속도를 blend의 조성, 사용한 SAA의 공중합조성 및 결정화 온도에 따라 조사하였다. 실험결과는 Avrami 방정식을 이용하여 분석하였다. Avrami지수는 결정화 온도에 관계없이 거의 모든 blend 시료에서 2의 값을 나타내었다. 결정화 속도는 blend시료의 SAA 함량 및 사용한 SAA 공중합체의 아크릴산함량이 증가함에 따라 급격히 느려졌다.

  • PDF

Seed 중합을 이용한 고고형분 수용성 점착제의 합성과 물성 (Property and Polymerization of Hi-solid PSA's using Seeded Polymerization)

  • 정영식;민성기;설수덕
    • 접착 및 계면
    • /
    • 제10권4호
    • /
    • pp.174-181
    • /
    • 2009
  • 고 고형분 점착제의 점도 개선을 위해 seed 중합을 이용하여 수용성 저점도 점착제를 중합하였다. Seed 바인더 중합 중 최적 중합 조건을 산출하고, 점착제 중합 시 seed 바인더와 acrylic acid의 함량을 변화시켜 점도변화와 피착면에 대한 점착박리강도를 측정하여 다음과 같은 결과를 얻었다. 점착제 중합에서 seed 바인더의 함량이 7 wt%/monomer일 때 60%의 고형분에서 2,100 cps의 낮은 점도를 나타내고 평활한 점착제 필름을 제조할 수 있었다. Acrylic acid함량 변화에 따른 기계적 물성 측정에서는 4 wt%/monomer의 acrylic acid를 사용 했을 때 우수한 점착박리강도와 유지력을 나타내었다.

  • PDF