• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.257-264
• /
• 2014

This paper presents the core competencies diagnosis system which targeted our collegiate students in an attempt to induce the core competencies for reinforcing the learning and employment capabilities. Because these days data give rise to a high level of redundancy and dimensionality with time complexity, they are more likely to have spurious relationships, and even the weakest relationships will be highly significant by any statistical test. So as to address the measurement of uncertainties from the classification of categorical data and the implementation of its analytic system, an uncertainty measure of rough entropy and information entropy is defined so that similar behaviors analysis is carried out and the clustering ability is demonstrated in the comparison with the statistical approach. Because the acquired and necessary competencies of the collegiate is deduced by way of the results of the diagnosis, i.e. common core competencies and major core competencies, they facilitate not only the collegiate life and the employment capability reinforcement but also the revitalization of employment and the adjustment to college life.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.5
• /
• pp.579-588
• /
• 2015

Fungi of the genus Pestalotiopsis have drawn attention for their capability to produce an array of bioactive secondary metabolites that have potential for drug development. Here, we report the determination of a polyketide derivative compound, pestalotiollide B, in the culture of the saprophytic fungus Pestalotiopsis microspora NK17. Structural information acquired by analyses with a set of spectroscopic and chromatographic techniques suggests that pestalotiollide B has the same skeleton as the penicillide derivatives, dibenzodioxocinones, which are inhibitors of cholesterol ester transfer protein (CETP), and as purpactins A and C', inhibitors of acyl-CoA:cholesterol acyltransferase (ACAT). Strain NK17 can make a fairly high yield of pestalotiollide B (i.e., up to 7.22 mg/l) in a constitutive manner in liquid culture. Moreover, we found that a putative histone deacetylase gene, designated as hid1, played a role in the biosynthesis of pestalotiollide B. In the hid1 null mutant, the yield of pestalotiollide B increased approximately 2-fold to 15.90 mg/l. In contrast, deletion of gene hid1 led to a dramatic decrease of conidia production of the fungus. These results suggest that hid1 is a modulator, concerting secondary metabolism and development such as conidiation in P. microspora. Our work may help with the investigation into the biosynthesis of pestalotiollide B and the development for new CETP and ACAT inhibitors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.33-38
• /
• 2016

Understanding of current features of collapsed buildings, terrain, and other infrastructures is a critical issue for disaster site managers. On the other hand, a comprehensive site investigation of current location of survivors buried under the remains of a building is a difficult task for disaster managers due to the difficulties in acquiring the various information on the disaster sites. To overcome these circumstances, such as large disaster sites and limited capability of rescue workers, this study makes use of a drone (unmanned aerial vehicle) to effectively obtain current image data from large disaster areas. The framework of 3D model reconstruction of disaster sites using aerial imagery acquired by drones was also presented. The proposed methodology is expected to assist fire fighters and workers on disaster sites in making a rapid and accurate identification of the survivors under collapsed buildings.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.13-28
• /
• 2015

In accordance with importance of the economic value of forests and forest use, the paradigm of development and use has emerged as the dominant paradigm of forest policy. As forests are recognized as an important means of Wellness, the government pursues a policy convergence between forest use and conservation. So, this article analyzed whether the change of forestry convergence paradigm is reflected in policy or not. The purpose of this study was to analyze through content analysis and network analysis, whether the new combined text value are fused in how forest policy. According to the results, the function of utilization which is off the traditional forestry industry and recreation, wellness are acquired a greater importance in the 5th plan than 4th plan. But the 5th plan is insufficient to establish of foundation for forestry management and welfare functions. The evidence suggest a sign of sustained paradigm convergency in forest policy of Korea. As the policy implication in establishing national forest master plan, it is necessary to strengthen policy capability to pursue sustainable forestry utilization, which can converge forest use and conservation.

• Korean Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.83-93
• /
• 1997

In order to adapt to the economic change with the rapid world change, the wise consumers should have positive cognizance of their roles and are requested to fulfil their duties as a consummer. Such capability of the consumer could be acquired from home, mass media and school, and specially the role of mother at home would have a great influence on their early children's consummer activities. The purpose of this study was to investigate the interrelationship of the consumer behavior between mother and their children. As a result of this study, the mother with higher educational background could manage effectively the allowance of the children. The mother with older age had a great influence on the consumer's role of the children and high record of the execution. Employed mother had higher level of execution for the consumer's rights than their count part. Accordingly, the consumer behavior of the mother will have an influence on the children's consumer behavior. Such a result showed the meaningful statistic relations(r=3.6, p<.001) for the economy activity of the children the home management and economy life of the mother, and the purchasing activity of the children including the execution of the consumer's right. In their regard, there was the significant statistic relations(r=19, p<.05) between the children's pocket money and the housekeeping management of the mother. In the meantime, it showed that another changing factor concerned with the consumer behavior of the mother have little influence the children's allowance.

• Smart Structures and Systems
• /
• v.13 no.3
• /
• pp.353-374
• /
• 2014

Recent studies were dedicated to the realization of measurements on stay-cable samples of different geometry and static conditions as available at several facilities. The elaboration of the acquired data showed a a satisfactory efficacy of the dampers made of NiTi wires in smoothing the cable oscillations. A further attempt to investigate the applicability of the achieved results beyond the specific case-studies represented by the tested cable-stayed samples is herein pursued. Comparative studies are carried out by varying the diameter of the NiTi wire so that similar measurements can be taken also from laboratory steel cables of reduced size. Details of the preparation of the Ni-Ti wires are discussed with particular attention being paid to the suppression of the creep phenomenon. The resulting shape of the hysteretic cycle differs according to the wire diameter, which affects the order of the fitting polynomial to be used when trying to retrieve the experimental results by numerical analyses. For a NiTi wire of given diameter, an estimate of the amount of dissipated energy per cycle is given at low levels of maximum strain, which correspond to a fatigue fracture life of the order of millions of cycles. The dissipative capability is affected by both the temperature and the cycling frequency at which the tests are performed. Such effects are quantified and an ageing process is proposed in order to extend the working temperature range of the damper to cold weathers typical of the winter season in Northern Europe and Canada. A procedure for the simulation of the shape memory alloy behavior in lengthy cables by finite element analysis is eventually outlined.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.981-984
• /
• 2006

Oil pollution of the ocean is a major environmental problem, especially in its coastal zones. Synthetic aperture radar (SAR) flown on satellites, such as ERS-2 and Envisat, has been proved to be a useful tool in oil spill monitoring due to its wide coverage, day and night, and all-weather capability. The total 120 SAR images containing oil spill over the East China Sea were collected and analyzed, ranging in date from July 23, 2002 to November 11, 2005. After preprocessed, SAR images were segmented by adaptive threshold method. The oil spill images were incorporated into GIS after distinguished from look-like phenomena, finally we presented the oil spills distribution map for the East China Sea. The wide-swath and quick-looks SAR imagery for mapping of oil spill distribution over large marine areas were proved to be useful when full resolution data are not available. After the temporal and spatial distribution of the oil spills were analyzed, we found that most of oil spills were distributed along the main ship routes, which means the illegal discharge by ships, and the occurrence of oil spill detected on SAR images acquired during morning and summer is much higher than during evening and winter.

• Smart Structures and Systems
• /
• v.13 no.6
• /
• pp.975-991
• /
• 2014

The objective of this study is to develop a reliable method for locating cracks in a beam using data fusion of fractal dimension features of operating deflection shapes. The Katz's fractal dimension curve of an operating deflection shape is used as a basic feature of damage. Like most available damage features, the Katz's fractal dimension curve has a notable limitation in characterizing damage: it is unresponsive to damage near the nodes of structural deformation responses, e.g., operating deflection shapes. To address this limitation, data fusion of Katz's fractal dimension curves of various operating deflection shapes is used to create a sophisticated fractal damage feature, the 'overall Katz's fractal dimension curve'. This overall Katz's fractal dimension curve has the distinctive capability of overcoming the nodal effect of operating deflection shapes so that it maximizes responsiveness to damage and reliability of damage localization. The method is applied to the detection of damage in numerical and experimental cases of cantilever beams with single/multiple cracks, with high-resolution operating deflection shapes acquired by a scanning laser vibrometer. Results show that the overall Katz's fractal dimension curve can locate single/multiple cracks in beams with significantly improved accuracy and reliability in comparison to the existing method. Data fusion of fractal dimension features of operating deflection shapes provides a viable strategy for identifying damage in beam-type structures, with robustness against node effects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.594-599
• /
• 2017

In this thesis, the development and the verification of the test-aid are described, providing various attitude errors through the electric stimulus to the Sun sensor. This test-aid for 2-axis analogue Sun sensor is used for polarity test in the assembly stage for GK2 satellite. The test-aid used for GK2 satellite is for COMS satellite and, due to the failure risk, manufactured by domestic company. The characteristics of the COMS test-aid used for GK2 satellite and the manufactured test-aid are showed with similar through the several tests. In this thesis, there are conformed the capability for replacing of test-aid because the characteristics of the manufactured test-aid is acquired same as that of the COMS test-aid using the controller tuning functions.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.422-424
• /
• 2002

The accuracy of DXA(Dual Energy X-ray Absorptiometry) highly depends on the detection and separation capability of dual energy X-ray X-ray photons. In addition both of scan time and patient exposure are affected by detection efficiency. A CZT detector with a good energy resolution and high detection efficiency was evaluated for the application of bone densitometry. Its performance was compared to a photomultiplier tube with a NaI(T1) scintillator in terms of energy resolution, detection efficiency and the accuracy of bone mineral density measurement. The comparison study was performed with CZT detector and PM tube using DXA equipments(OSTEO Plus, OSTEO Prima, ISOL Technology). The energy spectrum was acquired using MCA(Multi-Channel Analyzer). The used X-ray energy ranged from 20keV to 86keV. The MCA result of the CZT detector showed a slightly sharper energy spectrum than that of NaI(T1). Detection efficiency of the CZT detector at 59.5keV was 1.4 times better. Remarkably the final results of bone mineral density measurements demonstrate only less than 1% difference. The CZT detector appears to have many benefits for the application of bone densitometry. Its excellent energy resolution can enhance the counting accuracy of dual energy X-ray spectrum. Furthermore its compactness in physical dimension and no cooling requirement will be additional benefits for a more compact and accurate bone densitometer.