• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.294-300
• /
• 2013

In this paper, we present performance analysis results of parametric array communication system in terms of theoretical BER and channel capacity of MIMO in underwater AWGN channel by using simplified SNR of difference frequency. The SNR of the difference frequency is calculated by using transmission loss, noise level, and source level of difference frequency in which nonlinear effect is considered. By assuming primary frequencies as 210 kHz and 190 kHz, difference frequency as 20 kHz, transducer diameter as 0.1 m, and noise level as 50 dB and the requested BER as $10^{-4}$, we obtain parametric array communication range gains over the communication system using primary frequency of 59.11 km in fresh water and 5 km in sea water, respectively. Also we obtain range gains of 38.84 km and 46.38 km in fresh water, and 3.88 km and 4.38 km in sea water when we use SISO and $2{\times}2$ MIMO parametric array communications for the channel capacity of 10 bps/Hz.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.533-540
• /
• 2020

A total length of sperm whales can be estimated by measuring the Inter-Pulse Interval(IPI) of their clicks composed by multiple pulses. The IPI is caused by the two-way travel time of the sound transmission in the spermaceti within the whale head. Therefore, the IPI can be used to measure the whale's total length based on allometric relationships between head and body length. In this paper, the click signals recorded in the East Sea, Korea in 2017 were analyzed to estimate the size of sperm whales. The size of sperm whales calculated by the relationship between IPI and body length was 9.9 m to 10.9 m, which is corresponding to the size of an adult female or a juvenile male sperm whale. This non-lethal acoustic method has been demonstrated to accurately estimate the sperm whale size, and can provide useful information for domestic sperm whale monitoring.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.923-928
• /
• 2014

Communication underwater is severely limited when compared to communications in air because water is essentially opaque to electromagnetic radiation except in visible range. Acoustic systems are capable of long range communication, but offer limited data rates and significant latency due to the speed of sound in water. On the other hand, optical wireless communication has been proposed as one of the best alternatives to meet the requirements of the underwater observation and subsea monitoring systems. It will help In this study, we are developing an underwater optical communication system that integrates with a depot ship floating on the water. An interface between LED lighting communication system and Bluetooth module is presented to support the underwater-to-air communications. Error free image and text transmission at 3 m of water were achieved at bit rates of 230.4 kbps. This development effort will enhance infrastructure to efficiently interconnect between underwater wireless systems and command ship networks for underwater monitoring.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.425-430
• /
• 2013

Robust and high speed underwater communication is severely limited when compared to communications in terrestial. In free space, RF communication operates over long distances at high data rates. However, the obstacle in seawater is the severe attenuation due to the conducting nature. Acoustic modems are capable of long range communication up to several tens of kilometers, but it has low data-rate, high power consumption and low propagation speed. An alternative means of underwater communication is based on optics, wherein high data rates are possible. In this paper, the characteristics of underwater channel in the range of visible wavelength is investigated. And the possibility of optical wireless communication in underwater is also described. The LED-based transceiver and CMOS sensor module are integrated in the system, and the performance of image transmission was demonstrated.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.76-89
• /
• 2014

In this paper, we propose a MAC(Media Access Control) protocol based on flexible RWT(RTS Waiting Time) for underwater mobile ad-hoc networks with a three-way handshaking mechanism. This protocol can solve a problem of collision between RTS(Request-To-Send) and CTS(Clear-To-Send) packets in existing MACA(Multiple Access with Collision Avoidance) protocol. This proposed MAC protocol is also an effective protocol which can apply to underwater mobile ad-hoc networks in a real field by using implementable technologies. We set flexible RTS Waiting Time called RWT, considering various characteristics of underwater environment. It is possible to support variable network size according to node mobility. Finally, we conduct a performance evaluation between proposed MAC protocol and existing MACA based MAC protocol through practical implementation and experiment. As a result, we verify the superiority of our proposed MAC protocol in terms of throughput, packet drop rate, average transmission time, energy consumption and channel utilization.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.533-542
• /
• 2020

In this study, we developed a PC - based motorcycle simulator based on the development technology of the virtual patrol motorcycle training system. In order to get the impression that the motorcycle simulator is operating in a realistic way, it is important to have a reliable signal transmission and operation feeling between the driver and the simulator. In order to achieve this, we developed a system that can apply the sub-systems of the actual vehicle to the motorcycle simulator in order to generate the same operation feeling as the actual vehicle. Based on these results, We have developed a method for generating a feedback queue. Vehicle dynamics simulates real-time vehicle motion by receiving input from a steering wheel, accelerating / decelerating pedal, etc. operated by a driver on a vehicle simulator and transmitting the result to a visual and acoustic system, It is the central element of the simulator to generate. I want to summarize the main requirements of simulation dynamics.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.1-6
• /
• 2011

LED(Light Emitting Diode) components have advantages of longer lifetime, lower power consumption and easy-to-control, compare to normal lamp and fluorescent light, according to the development of recent technologies. Thus, lots of illuminations which utilize LED components could be used. Recently, Visible Light Communication(VLC) which is a part of communication technologies, utilizing high speed response characteristic of LED components, started receiving public attention. In case of VLC, there is no need of frequency allocation due to no use of radio, but also no interference exists during data transmission, much different in ISM((Industrial Scientific Medical band). This is the reason why a lot of research results about VLC are becoming issued. In this paper, a survey of feasibility for using VLC utilizing an original LED illumination for underwater applications has been done and a primitive possibility of its application has been examined.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.212-221
• /
• 2010

The bubbles could be created from multiple source in the surface of ocean. The bubbles which are created like this affect to the intensity and the sound speed of acoustic wave which are used from the ocean. From the research, it observed Reverberation from the sea surface, using Vbeam transmission and reception equipment that was a cross-shaped Array, from 2008 July 2nd to July 3rd at 4Km from the East Sea Mookho port. It is difficult to analyze data because the received signal has ambient noise and occurrence ISI(Inter Symbol Interference) for multipath. This paper remove that ambient noise and ISI using the directions of arrival beamforming and the filter and sum beamforming. After beamforming, a following DFE(Decision Feedback Equalizer) removes the remaining multipath components. Experimental results show that the proposed technique reduce the errors caused by ISI.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.78-83
• /
• 2000

Passive sonar system is designed to classify the underwater targets by analyzing and comparing the various acoustic characteristics such as signal strength, bandwidth, number of tonals and relationship of tonals from the extracted tonals and frequency lines. First of all the precise detection and extraction of signal frequency lines is of particular importance for enhancing the reliability of target classification. But, the narrowband frequency lines which are the line formed in spectrogram by a tonal of constant frequency in each frame can be detected weakly or discontinuously because of the variation of signal strength and transmission loss in the sea. Also, it is very difficult to detect and extract precisely the signal frequency lines by the complexity of impulsive ambient noise and signal components. In this paper, the automatic detection and extraction method that can detect and extract the signal components of frequency tines precisely are proposed. The proposed method can be applied under the bad conditions with weak signal strength and high ambient noise. It is confirmed by the simulation using real underwater target data.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.232-237
• /
• 2013

The role of the window length of time-frequency transformation is important for the audio data hiding methods utilizing phase information. In this paper, the experiments for our audio data hiding method were conducted in order to evaluate the audio quality and robustness against reverberant environment. The experimental results showed the tendency that the worse audio quality but better robustness were obtained when the lengthy window was applied. The important reason for quality degradation was pre-echo which flatters the percussive sound. The results also indicated that the wireless communication theory related to the length of time-frequency transform can be applied in the field of audio data hiding and acoustic data transmission.