• 전자공학회논문지
• /
• 제52권11호
• /
• pp.127-134
• /
• 2015

초음파를 이용한 조직 자극 기법은 지속적으로 연구, 개발되고 있으며, 최근 미용 및 비만 치료에 대한 관심이 높아짐에 따라 초음파 지방 제거술에 대한 다양한 연구가 진행되고 있다. 본 연구에서는 초음파 지방 제거술을 위한 초음파 변환기를 설계하고, 조사조건에 따른 집속영역의 형태와 열 변성 영역을 시뮬레이션 하였다. 이를 통하여 제원을 검증하였으며, 제작된 변환기의 초음파 방사 특성 및 가열 특성을 측정하여 유효성을 평가하였다. 또한 복합 구조의 매질을 대상으로 초음파 가열 특성을 예측하였으며 제작된 변환기의 집속점 형태 및 가열 특성이 지방층을 충분히 유화시킬 수 있을 것으로 판단하였다. 본 연구의 결과는 보다 효율적이고 안전한 초음파 지방 제거술의 기초 연구로 활용될 것으로 사료된다.

• 수산해양기술연구
• /
• 제51권3호
• /
• pp.340-347
• /
• 2015

The Commission for Conservation of Antarctic Marine Living Resources (CCAMLR) is utilized to manage krill resources using acoustic data collection and a scientific observer program operating on the fishing boats. However, the acoustic data were contained seriously noise, example of background, spike, and intermittent noise, due to purpose of fish boats. In this study, the noise removal techniques were confirmed the potential of the acoustic data analysis. Acoustic system and frequency used in the survey were commercial echosounder (ES70, SIMRAD) and 200 kHz split beam transducer. Acoustic data were analyzed using Echoview software (Myriax), and general data analysis and new noise removal method was used. Although a variety of noise, most of the noises have been removed using the noise removal processing. We confirmed the possibility of analyzing the acoustic data obtained from fish boats. The results will be useful for analysis of the acoustic data acquired from krill fishing boats.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.694-701
• /
• 2002

In this paper, through the study on locations of structural transducers for active control of the radiated sound from the vibrating plate, the active structural acoustic control (ASAC) system is proposed. And, for the evaluation of the proposed location, the experiment of the active structural acoustic control is implemented using the multi-channel filtered-x LMS algorithm and an additional filter (Acoustic Prediction Filter) to estimate the radiated sound using the acceleration signals of the plate. The structural transducers are piezoceramic actuator (PZT) and accelerometer. PZT is used as an actuator to reduce the vibration and the radiated sound. To maximize the control performance, each PZT actuator is located at the position that has the largest control sensitivity of the plate bending moment in the direction of x and y coordinates and the optimal PZT location is validated experimentally. Also, to find the acoustic prediction filter accurately, two accelerometers are located at the positions that have the largest radiation efficiencies of the plate, and the proposed locations are validated by simulation using the Rayleigh integral. The multi-channel filtered-x LMS algorithm is introduced to control a complex 2-D structural vibration mode. Finding the locations of structural transducers for active structural acoustic control of the radiated sound, the active structural acoustic control (ASAC) system can be presented and validated by experiments using a real time control system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.473-476
• /
• 2005

In this paper a new type of piezoelectric floating mass type transducer (PFMT) which has advantages of the piezoelectric transducers and the electromagnetic ones has been proposed and designed. To evaluate the frequency characteristics of the PFMT, the finite element analysis and the acoustic simulation of transducer have been performed. The designed PFMT was implemented by a precision manufacturing and the vibration characteristics of the PFMT were measured. Through the measured results from various experiments, it is verified that the implemented PFMT can be used in implantable middle ear hearing devices.

• 한국음향학회지
• /
• 제11권3호
• /
• pp.67-73
• /
• 1992

電磁誘導形 音源裝置는 짧은 펄스의 음파를 수중에 放射시킬 수 있어, 높은 距離分解能이 요구되는 해저 탐사용 음원 또는 수중 음파전달 특성시험용 음원등으로 널리 이용될 수 있다. 본 연구에서는 Eisenmenger가 제안한 형태의 電磁誘導形 音源裝置를 설계 제작하여, 放射되는 음파의 파형을 관찰하고, 그 주파수 특성을 분석하였다. 제작된 음원으로부터는 약 한 주기의 짧은 충격 펄스의 초음파가 얻어졌으며, 그 음압은 진동판의 두께가 얇은 경우에 크며, 콘덴서의 용량에 비례하여 증가하였다. 발생된 초음파의 중심 주파수는 振動板의 두께가 두꺼운 경우에 높으며, 콘덴서 용량이 증가할수록 낮아지고, 대역폭도 좁아졌다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1245-1247
• /
• 1995

In this paper, Analyzed structual property using SEM and XRD. The longer distance between substrate and target enhance crystalographic orientation of (110)plane, but inhibit growth of (002)plane. Also, deposited ZnO thin film on electrode layer inhibit crystalographic orientation of (002)plane, expecially Al electrode inhibit stronger than Pt layer. And using fabricated transducer, analyzed eletric and frequency characteristics.

• 한국세라믹학회지
• /
• 제27권1호
• /
• pp.74-78
• /
• 1990

In this study, to develope the ultrasonic transducer element, the extrusion method which is the processing technique of the piezoelectric composite materials is introduced, the connectivity of the piezoelectric composite materials is the 1-3 type, and we study the properties of the materials. The electromechanical coupling factor(kt) of the materials is above 0.6, the resonance property(fr) is the thickness mode in the frequency range of 0.5 to 2 [MHz] and the acoustic impedance(Zac) is about 5 to 7 [Maryl]. From these results, it is known that the piezoelectric composite materials manufactured byt he extrusion method will be able to develope the ultrasonic transducer elements.

• 대한의용생체공학회:의공학회지
• /
• 제2권1호
• /
• pp.15-20
• /
• 1981

In this study, the scattering of ultrasound by blood is theoretically studied. At first, the Chernow equation which represents acoustic propagation inside the region of inhomogenieties is modified to be fitted for blood. Then, scattering amplitude and scattering Cross-section at the far-field region are obtained from this equation. In this case, hemotocrit is assumed to be less than 26 per cent, and the red blood cell is modeled as independent scatterer. This study also develops a practical approximation for the backscattering of periodic sinewave bursts by a volume of randomly distributed scatterers, i.e., whole red blood cells. This expression for the received backscattering ultrasound pressure after the n-th burst of narrowband transducer is obtained from an ideal continuous wave transducer's response.

• 전자공학회논문지B
• /
• 제28B권10호
• /
• pp.822-830
• /
• 1991

In this paper, we propose a new process for ultrasonic B-mode image considering the sound field effects of a concave circuit focused transducer, and aim to remove the speckle pattern which cause the blurring on boundary in ultrasonic B-mode image. We discuss in detail the conception of speckle pattern generation, and the frequency compounding method which is applied to the process for getting a speckle reduced B-mode image. Through the computer simulation, we define the meaning of speckle region, and show the results of reduced speckle pattern. It is discovered in the results that the frequency compounding method is very effective for boundary detection and that the application of the method is limited by various conditions.

• 비파괴검사학회지
• /
• 제21권1호
• /
• pp.1-21
• /
• 2001

It will be shown how models can simulate all the elements of an ultrasonic NDE measurement system, including the pulser/receiver, cabling, transducer(s), and the acoustic/elastic waves fields. When combined, these models form what is called the electroacoustic measurement model. It will be demonstrated how this electroacoustic measurement model can be used to conduct parametric transducer and system studies and how the model can form the basis for experimentally characterizing all the elements of the ultrasonic measurement system, using purely electrical measurements.