• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.127-134
• /
• 2015

Tissue stimulation technique using ultrasound has been continuously studied and developed. Recently, as a increment of interests for obesity treatment and cosmetic care, a various studies on ultrasonic fat emulsification has been conducted. In this study, the fat emulsification adapted ultrasonic transducer was designed. And using designed transducer, the simulation for the shape of focal area and thermal degradation region was conducted. The dimensions were verified by the simulation results. And the effectiveness was confirmed by evaluating measured radiation characteristic and heating characteristic. In addition, we estimated the ultrasonic heating characteristics in composite structure medium. The shape of focal point and heating characteristic of the proposed transducer were determined to be sufficient to emulsify the fat. The results of this study are considered to be used as basic research in more efficient and safe ultrasonic fat removal.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.340-347
• /
• 2015

The Commission for Conservation of Antarctic Marine Living Resources (CCAMLR) is utilized to manage krill resources using acoustic data collection and a scientific observer program operating on the fishing boats. However, the acoustic data were contained seriously noise, example of background, spike, and intermittent noise, due to purpose of fish boats. In this study, the noise removal techniques were confirmed the potential of the acoustic data analysis. Acoustic system and frequency used in the survey were commercial echosounder (ES70, SIMRAD) and 200 kHz split beam transducer. Acoustic data were analyzed using Echoview software (Myriax), and general data analysis and new noise removal method was used. Although a variety of noise, most of the noises have been removed using the noise removal processing. We confirmed the possibility of analyzing the acoustic data obtained from fish boats. The results will be useful for analysis of the acoustic data acquired from krill fishing boats.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.9
• /
• pp.694-701
• /
• 2002

In this paper, through the study on locations of structural transducers for active control of the radiated sound from the vibrating plate, the active structural acoustic control (ASAC) system is proposed. And, for the evaluation of the proposed location, the experiment of the active structural acoustic control is implemented using the multi-channel filtered-x LMS algorithm and an additional filter (Acoustic Prediction Filter) to estimate the radiated sound using the acceleration signals of the plate. The structural transducers are piezoceramic actuator (PZT) and accelerometer. PZT is used as an actuator to reduce the vibration and the radiated sound. To maximize the control performance, each PZT actuator is located at the position that has the largest control sensitivity of the plate bending moment in the direction of x and y coordinates and the optimal PZT location is validated experimentally. Also, to find the acoustic prediction filter accurately, two accelerometers are located at the positions that have the largest radiation efficiencies of the plate, and the proposed locations are validated by simulation using the Rayleigh integral. The multi-channel filtered-x LMS algorithm is introduced to control a complex 2-D structural vibration mode. Finding the locations of structural transducers for active structural acoustic control of the radiated sound, the active structural acoustic control (ASAC) system can be presented and validated by experiments using a real time control system.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.473-476
• /
• 2005

In this paper a new type of piezoelectric floating mass type transducer (PFMT) which has advantages of the piezoelectric transducers and the electromagnetic ones has been proposed and designed. To evaluate the frequency characteristics of the PFMT, the finite element analysis and the acoustic simulation of transducer have been performed. The designed PFMT was implemented by a precision manufacturing and the vibration characteristics of the PFMT were measured. Through the measured results from various experiments, it is verified that the implemented PFMT can be used in implantable middle ear hearing devices.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.3
• /
• pp.67-73
• /
• 1992

An electromagnetic induction transducer which radiates an implusive ultrasonic wave, could be useful for high power sound source in underwater acoustical survey. The aim of this study is to investigate the waveforms and the spectral characteristics of the waves produced by the transducer which was on the basis of the design criteria proposed by Eisenmenger. It was found that the sound pressure levels of the impulsive ultrasonic waves were directly proportional to the capacitance of the energy stored in the capacitor and inversely proportional to the thickness of the vibrating copper foil, while the center frequencies and the fractional bandwidths were vice versa.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1245-1247
• /
• 1995

In this paper, Analyzed structual property using SEM and XRD. The longer distance between substrate and target enhance crystalographic orientation of (110)plane, but inhibit growth of (002)plane. Also, deposited ZnO thin film on electrode layer inhibit crystalographic orientation of (002)plane, expecially Al electrode inhibit stronger than Pt layer. And using fabricated transducer, analyzed eletric and frequency characteristics.

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.74-78
• /
• 1990

In this study, to develope the ultrasonic transducer element, the extrusion method which is the processing technique of the piezoelectric composite materials is introduced, the connectivity of the piezoelectric composite materials is the 1-3 type, and we study the properties of the materials. The electromechanical coupling factor(kt) of the materials is above 0.6, the resonance property(fr) is the thickness mode in the frequency range of 0.5 to 2 [MHz] and the acoustic impedance(Zac) is about 5 to 7 [Maryl]. From these results, it is known that the piezoelectric composite materials manufactured byt he extrusion method will be able to develope the ultrasonic transducer elements.

• Journal of Biomedical Engineering Research
• /
• v.2 no.1
• /
• pp.15-20
• /
• 1981

In this study, the scattering of ultrasound by blood is theoretically studied. At first, the Chernow equation which represents acoustic propagation inside the region of inhomogenieties is modified to be fitted for blood. Then, scattering amplitude and scattering Cross-section at the far-field region are obtained from this equation. In this case, hemotocrit is assumed to be less than 26 per cent, and the red blood cell is modeled as independent scatterer. This study also develops a practical approximation for the backscattering of periodic sinewave bursts by a volume of randomly distributed scatterers, i.e., whole red blood cells. This expression for the received backscattering ultrasound pressure after the n-th burst of narrowband transducer is obtained from an ideal continuous wave transducer's response.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.10
• /
• pp.822-830
• /
• 1991

In this paper, we propose a new process for ultrasonic B-mode image considering the sound field effects of a concave circuit focused transducer, and aim to remove the speckle pattern which cause the blurring on boundary in ultrasonic B-mode image. We discuss in detail the conception of speckle pattern generation, and the frequency compounding method which is applied to the process for getting a speckle reduced B-mode image. Through the computer simulation, we define the meaning of speckle region, and show the results of reduced speckle pattern. It is discovered in the results that the frequency compounding method is very effective for boundary detection and that the application of the method is limited by various conditions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.1
• /
• pp.1-21
• /
• 2001

It will be shown how models can simulate all the elements of an ultrasonic NDE measurement system, including the pulser/receiver, cabling, transducer(s), and the acoustic/elastic waves fields. When combined, these models form what is called the electroacoustic measurement model. It will be demonstrated how this electroacoustic measurement model can be used to conduct parametric transducer and system studies and how the model can form the basis for experimentally characterizing all the elements of the ultrasonic measurement system, using purely electrical measurements.