• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.867-872
• /
• 2002

A high intensity acoustic test facility is constructed at Korea Aerospace Research Institute (KARI) by 2003. The reverberant chamber of the facility has a volume of 1,228 cubic meters and shall provide an acoustic environment of 152 dB over the frequency range of 25 Hz to 10,000 Hz. The facility consists of a large scaled reverberant chamber, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of a chamber and power generation systems are controlled to meet the requirement of the test. The volume of a reverberant chamber is controlled by the size of test objects and the reverberant characteristics of a chamber. The capacity of acoustic power generation systems is determined by the energy absorption of a chamber and the efficiency of acoustic modulators. Simple math is employed to calculate the required power of acoustic modulators. Moreover, the paper explains how the distribution of sound pressure level at low frequency is checked by analytical and numerical methods.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.537-540
• /
• 2005

Shaped Sound Focusing is defined as the generation of acoustically bright zone with a certain shape in space using multiple sources. The acoustically bright zone is a spatially focused region with relatively high acoustic potential energy level. In view of the energy transfer, acoustic focusing using multiple sources is essential because acoustic energy is very small to use other type of energy. It can be done by taking optimization techniques which can be acoustic brigtness control and acoustic contrast control. But it has not been frequently concerned about several cases, so the case of hollow cylinder shaped sound focusing is adapted and there wi11 be arguments about available control variables and spatially controllable region in this case.

• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1165-1174
• /
• 2001

The objective of this study is to understand the generation mechanism of sound and to develop a prediction method for the acoustic pressure field of a centrifugal fan. If the fan is operating at the free field without the casing, the acoustic analogy is a good method to predict the acoustic of the fan. But, the casing gives a dominant effect to the radiated sound field and the scattering effect of casing should be considered. So, in this paper the Kirchhoff-BEM is developed, which can consider the scattering effect of the rigid body. In order to consider the scattering and diffraction effects owing to the casing, BEM is introduced. The source of BEM is newly developed, so the sound field of the centrifugal fan can be obtained. In order to compare the predicted one with experimental data, a centrifugal impeller and a wedge are used in the numerical calculation and the results are compared with the experimental data. Reasonable results are obtained not only for the peak frequencies but also for the amplitudes of the tonal sound. The radiated acoustic field shows the diffraction and scattering effects of the wedge clearly.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.468-471
• /
• 2008

Sound manipulation is to control sound field using multiple sound sources for appropriate purposes. In linear acoustics, a sound can be constructed by superimposing several fundamental sound fields such as a planewave and sphere shape sound field. That is how we manipulate sound field. In this paper, we introduce the theory of sound manipulation and its applications from the examples of the generation of fundamental sound field: a circle, a ring shape sound field and a planewave field.

• 한국음향학회지
• /
• 제28권3호
• /
• pp.187-197
• /
• 2009

해양에서는 파도, 빗방울 등 해수면에 일어나는 많은 물과 물의 충돌, 해양에서 운행되는 선박, 여러 해양 생물들의 생명활동 그리고 여러 발생 원들에 의해 많은 기포들이 생성될 수 있다. 이렇게 생성된 기포들은 해양에서 사용되는 음파의 세기와 음속에 영향을 미치게 된다. 본 연구에서는 2007년 9월 19일 04:00 부터 17:00 까지 남해 남형제도 해역에서 Acoustic Bubble Spectrometer (ABS)와 CTD를 사용하여 해양 기포생성과 생성기포가 음파에 미치는 영향을 관측하였다. 관측자료를 통하여 풍속과 기포생성의 연관성, 기포의 반경에 따른 기포량, 주파수별 음속비를 분석하였다. 최종적으로 분석자료를 통해 기포가 음파전달에 미치는 영향을 모의하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2003년도 정기총회 및 추계학술대회
• /
• pp.67-72
• /
• 2003

The present article evaluates a performance hall, which improves sound efficiency. In general, the sidewall of the music hall is plane circle. thus there happens a focus phenomenon. To overcome it. the music hall improves its sound efficiency by making its sidewall irregular. After measuring impulse response from the performance hall, evaluation indices on the temporal distribution of sound energy such as RT, EDT, D50, C80, RASTI and BR were obtained, and based on them, indoor acoustic characteristics and the generation of echoes were determined. According to the results, evaluation indices showed that the acoustic condition was satisfactory in general. This study is to provide fundamental data for acoustic design of music hall with round form by analyzing the room acoustic characteristics of music hall.

• 오토저널
• /
• 제8권4호
• /
• pp.43-55
• /
• 1986

소음저감에 대한 연구에서 소음언을 규명하기 위해서 소음의 발생 메카니즘을 안다는 것은 중요 하다. 구조물의 진동과 이로 인해서 발생되는 방사음과의 관계는 상당히 복잡하기 때문에 본 연 구에서는 음향인텐시티의 측정을 위하여 간단한 방사 모델을 대해 연구하였다. 소음원 규명의 첫 단계로서 본 연구에서는 음압측정에 의한 소음평가에 대해 알아 보았다. 두 번째 단계로서 음향 인텐시티법을 이용하여 음향 방사 모우드 패턴을 결정하였으며 음향인텐시티법이 소음원 검출에 유효함을 입증하였다. 또한 본 연구에서는 방진재 부착에 따른 음의 방사특성을 예측하고 방 진재 부착위치를 결정할 수 있었다.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.191-197
• /
• 2017

스마트폰의 사용이 보편화됨에 따라 스마트폰을 이용한 다양한 응용서비스가 개발되고 있으며, 추가적인 장치없이 음향 신호를 이용하여 데이터를 송수신하거나 위치를 측정하는 기술이 활발하게 개발되고 있다. 그러나 스마트폰 장치의 한계로 음향 주파수의 선택에 한계가 있고, 음향신호 발생 장치의 전자회로의 비선형성으로 인해 인간이 감지할 수 있는 음향신호 잡음이 발생하는 문제가 있다. 따라서 시끄러운 소리가 나므로 실용화에 어려움이 있다. 본 논문에서는 인간이 감지하는 음향 신호의 크기 측정 방법을 제안하고, 이에 따라 여러 가지 음향 신호를 비교 분석함으로써 음향 통신 및 위치측정 시스템 개발시에 비가청 음향 신호 설계에 활용하도록 한다.

• Smart Structures and Systems
• /
• 제11권6호
• /
• pp.605-621
• /
• 2013

The paper deals with the design of a device for sound reproduction to be fixed to a supporting surface. The device is made up of two different types of acoustic actuators based on different technologies. This allows to reproduce sound in the range of frequencies from 20 Hz to 20 kHz. The generation of sound at high frequencies is demanded to a magnetostrictive actuator, while a more traditional magnetodynamics actuator is used to generate sound at low frequencies. The coupling between these two actuators leads to a device having small overall dimensions and high performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.962-965
• /
• 2005

A high intensity progressive wave tube is installed at Korea Aerospace Research Institute (KARI) for acoustic environmental tests. The test facility has 700 mm x 800 mm cross-sectional area, and provides acoustic environment of 165 dB over the frequency range of $25Hz{\sim}10,000Hz$. The facility consists of a 6 m long acoustic wave tube, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of the facility and power generation systems are controlled to meet the requirement of the test. The shape and length of the tube has been designed by using the size of test objects and the wave propagation characteristics of the tube. The capacity of acoustic power generation systems is determined by the energy conversion of acoustic wave and the efficiency of acoustic modulators. Moreover, the paper introduces test run results of the tube. Overall of 163dB has been generated by using the test facility.