• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.14-19
• /
• 2013

금속 재료의 비선형 파라미터는 고유한 물성치로서 기본주파수의 음압의 크기($A_1$)과 2차고조파의 음압의 크기($A_2$)을 측정하면 산정할 수 있다. 하지만, 실험적으로 $A_1$과 $A_2$를 측정하는 것은 매우 복잡한 변환 과정이 필요하기 때문에 현재 많은 연구자들이 비선형 파라미터의 절대값을 측정하지 않고, 전압 변화를 관찰하는 비선형 파라미터의 상대값을 측정하고 있다. 하지만, 비선형 파라미터 상대값으로는 재료의 물성치를 대변할 수가 없기 때문에, 열화도에 따른 시편 측정에만 사용할 수 있는 제약이 있다. 따라서 본 연구에서는 정전용량 측정기법(capacitive detector)보다는 비용이 적게 소모되고 현장 적용이 가능한 압전형 수신기법(piezoelectric detection)을 이용하여 비선형 파라미터의 절대값을 측정하기 위한 시스템을 구축하였다. $A_1^2vsA_2$ 그래프로 시스템의 선형성을 검증하고 시험편인 fused silica와 Al2024-T4에 대한 비선형 파라미터를 측정하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.633-634
• /
• 2013

• 전자공학회논문지
• /
• 제50권12호
• /
• pp.205-209
• /
• 2013

기존의 반향신호 억제기는 스피커와 마이크 사이의 선형 관계만을 고려하여, 마이크로 입력된 신호로 부터 반향신호를 억제한다. 하지만 실제적으로 스피커는 비선형성을 가지고 있으며, 이 때문에 기존의 반향신호 억제기는 비선형 반향신호 환경에서 그 성능이 저하된다. 본 논문에서는 스피커의 비선형성을 모델링하기에 적합한 주파수영역상의 Least square 방식의 Volterra filter를 적용한 비선형 반향신호 억제기를 제안하였다. 객관적 성능평가 방법인 Echo Return Loss Enhancement (ERLE)와 Speech Attenuation(SA)를 도입하여 제안된 알고리즘의 성능 검증에 사용하였다. 제안된 알고리즘이 기존의 반향신호 억제기보다 선형 및 비선형 반향 신호 환경에서 우수한 성능을 보이는 것을 확인하였다.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.292-301
• /
• 2008

A linearized model for hysteretic acoustic nonlinearity of imperfectly joined interface is proposed and analyzed by using Coulomb damping to investigate the characteristics of the reflection and transmission coefficients for harmonic waves at the contact interface. Closed crack is modeled as non welded interface that has nonlinear discontinuity condition in displacement across its boundary. Based on the hysteretic contact stiffness of the contact interface, the reflected and transmitted waves are determined by deriving the tractions on both sides of the interface in terms of the discontinuous displacements across the interface. It is found that the amplitudes of the reflected and transmitted waves are dependent on the frequency and the hysteretic stiffness. As the frequency of the incident wave increases, the higher reflection and lower transmission are obtained. It also shows that the hysteresis of the interface increases the reflection coefficient, but reduces the transmission coefficient. A fatigue crack is also made in aluminum specimen to demonstrate these characteristics of the reflection and transmission of contact interfaces.

• Structural Monitoring and Maintenance
• /
• 제9권3호
• /
• pp.237-258
• /
• 2022

This paper studies detecting and locating loose bolts using nonlinear guided waves. The 3D Finite Element (FE) simulation is used for the prediction of guided waves' interactions with loose bolted joints. The numerical results are verified by experimentally obtained data. The study considers bolted joints consisting of two bolts. It is shown that the guided waves' interaction with surfaces of a loose bolted joint generates Contact Acoustic Nonlinearity (CAN). The study uses CAN for detecting and locating loose bolts. The processed experimentally obtained data show that the CAN is able to successfully detect and locate loose bolted joints. A 3D FE simulation scheme is developed and validated by experimentally obtained data. It is shown that FE can predict the propagation of guided waves in loose bolts and is also able to detect and locate them. Several numerical case studies with various bolt sizes are created and studied using the validated 3D FE simulation approach. It is shown that the FE simulation modeling approach and the signal processing scheme used in the current study are able to detect and locate the loose bolts in imperfect bolted joints. The outcomes of this research can provide better insights into understanding the interaction of guided waves with loose bolts. The results can also enhance the maintenance and repair of imperfect joints using the nonlinear guided waves technique.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.591-595
• /
• 2000

Sound absorbing characteristics of poroelastic materials is known to be greatly affected by high intensity acoustic waves. However, this effect has not been considered yet. In this study, the extended semilinear model based on Biot's theory for the porous materials and the characteristics of nonlinear waves in poroelastic sound absorbing materials were introduced. The expressions for the finite-amplitude acoustic plane waves were presented. By combining each nonlinear wave with appropriate matching conditions, we could investigate the effects of finite-amplitude acoustic waves on absorption characteristics of poroelastic materials. In the most ideal case considered in this paper, the absorption coefficient was found to become larger than that of linear incident waves. It was shown that the absorption coefficient became greater especially as frequency goes higher and as distance from the source goes larger. These phenomena may be inferred to result from 'dissipation effects due to nonlinearity'. This finding may have important implications for high intensity noise control.

• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.211-217
• /
• 2011

This paper proposes a quasi-optimal linear DOA (Direction-of-Arrival) estimator which is necessary for the development of a real-time robot auditory system tracking moving acoustic source. It is well known that the use of conventional nonlinear filtering schemes may result in the severe performance degradation of DOA estimation and not be preferable for real-time implementation. These are mainly due to the inherent nonlinearity of the acoustic signal model used for DOA estimation. This motivates us to consider a new uncertain linear acoustic signal model based on the linear prediction relation of a noisy sinusoid. Using the suggested measurement model, it is shown that the resultant DOA estimation problem is cast into the NCRKF (Non-Conservative Robust Kalman Filtering) problem [12]. NCRKF-based DOA estimator provides reliable DOA estimates of a fast moving acoustic source in spite of using the noise-corrupted measurement matrix in the filter recursion and, as well, it is suitable for real-time implementation because of its linear recursive filter structure. The computational efficiency and DOA estimation performance of the proposed method are evaluated through the computer simulations.

• 비파괴검사학회지
• /
• 제28권4호
• /
• pp.352-357
• /
• 2008

구조물의 안전 보장 문제에 있어 재료의 파손 이전에 미세균열을 검출하는 것은 매우 중요하다. 비선형 초음파 기법은 일반적인 초음파 기법보다 미세결함에 민감하기 때문에 이를 이용하여 비파괴적으로 구조물이나 재료의 건전성을 진단하는 방법이 주목받고 있다. 계면접촉에 의한 비선형 초음파 효과는 초음파가 내부의 미세 균열에 입사될 때 미세균열면에서 응력과 변위가 비선형 관계를 가지고, 이에 의해 파가 왜곡되어 그 결과 고조파 성분이 발생하는 현상이다. 본 연구에서는 이러한 비선형 초음파 기법의 적용가능성을 알루미늄 시편에 인위적으로 발생시킨 피로균열을 대상으로 실험적으로 검증하고자 하였다. 이를 위해 V-노치를 갖는 A16061의 피로균열 시험편을 준비하고, 균열방향으로 2차 고조파 성분의 크기를 측정하였다. 실험결과 미세균열에서 고조파 성분이 크게 발생하며 이 기법에 의한 균열깊이 측정이 일반적인 반사파의 6 dB drop법보다 정확함을 확인하였다.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.85-92
• /
• 2000

The pulsating pressure waves are composed of fundamental frequency and higher order harmonics in exhaust pipe of engines. The nonlinearity in exhaust pipe is caused by their interactions. The error which is between prediction and measurement is induced by the nonlinearity. We can not explain this phenomenon using linear acoustic theory which is existing theory. So power spectrum which was used in linear theory is not useful. Bispectrum and bicoherence functions which are a higher order spectrum are applicable to explain this phenomenon. This paper proposes a nonlinear effect of pulsating pressure waves. The phenomenon proposed here is identified by using of higher order spectrum density functions.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.582-590
• /
• 2007

Imperfectly jointed interface serves as mechanical waveguide for elastic waves and gives rise to two distinct kinds of guided wave propagating along the interface. Contact acoustic nonlinearity (CAN) is known to plays major role in the generation of these interface waves called generalized Rayleigh waves in non-welded interface. Closed crack is modeled as non-welded interface that has nonlinear discontinuity condition in displacement across its boundary. Mathematical analysis of boundary conditions and wave equation is conducted to investigate the dispersive characteristics of the interface waves. Existence of the generalized Rayleigh wave(interface wave) in nonlinear contact interface is verified in theory where the dispersion equation for the interface wave is formulated and analyzed. It reveals that the interface waves have two distinct modes and that the phase velocity of anti-symmetric wave mode is highly dependent on contact conditions represented by linear and nonlinear dimensionless specific stiffness.