• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.407-408
• /
• 2014

본 논문은 3차원 수중방사패턴 예측을 위하여 수중구조물의 표면진동장을 이용하여 3 차원 원음장 패턴을 예측한 뒤 수중구조물의 근접음장 계측데이터를 활용하여 산출된 원음장 음향파워를 이용하여 산출된 원음장 패턴의 음압크기를 보정하였고 이를 실험데이터와 비교 분석한 논문이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1032-1035
• /
• 2004

Pressure distribution is measured by way microphones to identify noise sources in the space. For example, beam-forming method or acoustic holography use phase information to identify the source. Therefore, the phase is significant information to correctly identify the source position. However, due to the microphone characteristics and measuring systems, measured signals always have errors, which make the identification difficult. Therefore, phase calibration of microphones is needed. Duct and speaker systems are generally used as calibrators. Acoustic characteristics of the calibrator are, of course, functions of many Parameters of the system: i.e. duct size, frequency, and microphone spacing. In this paper, design parameters which effect on the performance and size of the calibrators are considered. Then the parameters would be applied to design and real product of the phase-calibrator.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.94-100
• /
• 1997

In order to investigate the radiation of sound from the King Song-Duk bell, we measured the sound pressure around the bell at every 30$^{\circ}$ using a microphone line array which was composed of 30 microphones separated by 15cm;total number of measurement point was 360. The sound field was estimated by using cylindrical acoustic holography. The spectrum of measured sound pressure demonstrates that it is almost like white noise in the very beginning, but in 10 seconds two close frequency components(64.06Hz, 64.38Hz) remain and make a famous beating. This beating sound is often believed to make unique sound of the King Song-Duk bell. The mode shapes of that frequency components are the same except that one is rotated by 45$^{\circ}$ from the other. This phenomenon occurs at the other pairs of components are the same except ones in very high frequency range where the mode shapes are rather complex.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.166-170
• /
• 2005

This paper describes the experimental study for the position estimation method of underwater sound source using the Nearfield Acoustic Holography. The result confirms that it can be used in the identification of underwater noise sources. The sound sources in the experimental work consists of 2 spherical projectors and the near-Held sound pressure is measured in the hologram plane. From the cross-power spectra of the measured data, the complex sound pressures on the hologram plane is derived and its spatial transformation gives sound fields in a source region. The obtained sound fields in a source region showed that the position of each sound source and their relative source strength are exactly estimated. In conclusion, this technique can be applied for estimation of each source position and its relative strength contribution for the underwater multiple sound sources.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1654-1668
• /
• 1992

The acoustic field resulted by the radiation of sound from vibrating structure is predicted based on the sound pressure measurements. The sound pressures are measured at discreate point on the measurement plane ; Hologram. Based on these discreate measurements, the sound field away from the acoustic source is constructed based on the discreate form of Kirchhoff-Helmohltz integral equations The velocities, intensities, and pressures of arbitrary plane of interest in space are predicted and visualized The effects on the sound field reconstruction ; finite aperture effect, effect of finite sampling interval in space studied in terms of wraparound error and spatial aliasing. Numerical simulations and experimental verifications are performed to see these effects. To reduce the wraparound error, zero padding technique in space is used and the usefulness of the method is demonstrated by various examples.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.843-848
• /
• 2000

BEA(Boundary Element Analysis) based on Kirchhoff-Helmholtz integral equation is widely used in the prediction of sound radiation problems of vibrating structures. Accurate estimation of sound pressure distribution by BEA can be [possible if and only if dynamic behavior of the relating structure was described correctly. Another plausible method of sound radiation phenomena could be the NAH(Nearfield Acoustic Holography) method. NAH also based on the identical governing equation with BEA could be one of the best acoustic imaging schemes but it has disadvantages of the complexity of measurement and of the need of large amount of measuring points. In this paper, modal expansion method is presented for taking accurate dynamic data of the structures efficiently. This method makes use of vibration principle an arbitrary dynamic behavior of the structure is described by the summation of that structures mode shapes which can be calculated by FEA easily and accurately. Sound pressure field from a vibration flat plate is calculated using the combination of vibration signal on that flat plate from experiment, and of the natural mode shapes form FEA. When sound pressure field from vibration signal is calculated the importance of the phase information was emphasized.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.110-112
• /
• 2009

Transient acoustic pressure in the near field of an impacted plate carries information that can be utilized for recovering the impact force history. The inverse calculation approach using BEM-based NAH, which is conventionally used for time harmonic excitation, can be applied for reconstructing the transient waves using the principle of Fourier transform and spectral analysis. Then, using the recovered velocity in normal direction of the plate surface, the corresponding structural intensity can be obtained and the identification of input power can be performed. However, several manipulations should be given to overcome numerical artifacts, such as aliasing and erratic oscillation at discontinuity, and to suppress the effect of noise. Experiment using a simply supported plate is presented for demonstration purpose.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.498-501
• /
• 2006

When an object or objects, rigid or flexible, presents in incident sound field, the sound wave is scattered. This, we call, is scattered sound field. It, of course, depends on the amplitude and the direction of the incident sound field as well as the geometry and the surface impedance of the scatterer(object). This paper addresses the way to measure scattered sound field by using arbitrary incident sound wave. This means that the method can decompose the scattered field from measured sound field with respect to any magnitudes and directions of incident plane-waves.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.313-317
• /
• 1998

경계요소법에 기초한 음향 홀로그래피의 재구성 정확도 향상을 위해서는 근접 음장에서의 음압 측정을 수반한다. 이에 따라 비전파음 성분이 측정에 포함되어 전달행렬의 특이성에 의한 오차를 줄일 수 있다. 그러나, 전달행렬 구성을 위해서 사용되는 일반적인 경계요소법은 Kirchhoff-Helmholtz 방정식의 기본해가 갖는 특이성 때문에 근접음장에서 큰 수치 오차를 유발하는 문제가 있다. 특이성이 제거된 경계 적분방정식을 도입하여 음향 홀로그래피를 수행함으로써 근접 음장에서의 수치오차 문제를 극복하고 정확한 음장 예측 및 전달 행렬을 구성할 수 있다. 본 연구에서는 단순한 수치 해석 모델을 이용하여 음향 홀로그래피 계산을 수행하였고, 일반 경계요소법을 사용한 경우와 비교하여 향상된 결과를 얻을 수 있음을 밝혔다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.397-400
• /
• 2004

소음원 또는 방사음장을 가시화하기 위하여 소음원을 둘러싸는 한 면에서의 음압측정을 통해 임의의 3차원 공간상의 음향 물리량을 예측하는 음향 홀로그래피 방법이 사용되고 있으며 이때 반사파가 존재하지 않는 기본 가정을 만족해야 한다. 반사파가 존재하는 경우에는 반사파를 보정하거나 또는 반사파의 음장이 미치는 영향이 무시할 만큼 작다고 가정하여 음장 예측이 가능하게 된다. 최근 해양연구원에서는 음향 홀로그래피 방법을 이용하여 수중음장을 가시화하는 시스템을 개발하였으며 시스템 검증을 위해 무향수조 내 단순음원을 이용하여 음장예측을 수행하였다. 무향수조 표면에는 흡음처리가 되지 않아 표면 반사파가 존재하나 해석 결과 반사파의 영향이 작은 경우에는 반사파를 무시하고 음장해석의 수행이 가능함을 확인하였다.