• 대한의용생체공학회:의공학회지
• /
• 제27권5호
• /
• pp.229-236
• /
• 2006

The acoustic field analysis method is the superior calibration method for rectifying the ultrasonic probe sensitivity. This method also can be applied to evaluate the probe performance in clinical fields without numerical analysis and precise measurements. In this paper, we propose the method of acoustic field pattern analysis with probe channel division for the evaluation of diagnostic ultrasound probe characterization. In order to verify our purpose, we performed a set of experiments. We measured the acoustic-field pattern of the three inferiority probes by channel division to evaluate an acoustic field distribution and impulse response characteristics. By comparing the results of acoustic field measurement method with that of conventional method such as impulse response and live image test for linear array probes, it is demonstrated that the ultrasound field measurement method is more effective then conventional method in detection of defective elements.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2586-2594
• /
• 2010

순음청력검사기는 정확한 주파수와 음압을 갖는 순음과 차폐 음을 생성하여 출력할 수 있어야 한다. 이를 위해 일정한 기간마다 보정을 하는 것이 불가피하다. 그러나 수동 보정을 사용하는 일반 순음청력검사기의 음향 보정은 집중력이 필요할 뿐 아니라 시간이 많이 걸리는 단점이 있다. 반면, PC 기반 순음청력검사기의 경우 소프트웨어를 이용하여 자동으로 보정을 수행하는 것이 가능하다. 본 논문에서는 PC 기반 순음청력검사기의 자동 보정을 지원하기 위해 PC 사운드카드를 이용하여 구현한 음압측정기와 이를 이용한 순음청력검사기의 자동보정모듈을 기술한다. 자동 보정모듈을 이용하여 보정한 PC 기반 순음청력검사기를 국제표준기구가 제공하는 기준등가역치음압수준과의 적합 여부를 검증한다.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.42-49
• /
• 2009

In this paper, an alternative method was introduced to conduct a transfer path analysis for airborne noise. The method used the transfer function matrix composed of acoustic transfer functions that are referenced by the input voltage of a calibration source. A calibration factor which is converting a virtual voltage to source strength was deduced by vibro-acoustical reciprocity theorem. The calibration factor is then multiplied to the virtual input voltage to estimate the operational source strength. Three loudspeakers were used to noise sources of acrylic half car model. The method was applied to airborne noise transfer path analysis of the half car. The estimated source strength by transfer path analysis was compared the deduced source strength by vibro-acoustical reciprocity to verify the method.

• 수산해양기술연구
• /
• 제58권2호
• /
• pp.130-140
• /
• 2022

Recently, wideband acoustic technology has been introduced and started to be used in fisheries acoustic surveys in various waters worldwide. Wideband acoustic data provides high vertical resolution, high signal-to-noise ratio and continuous frequency characteristics over a wide frequency range for species identification. In this study, the main characteristics of wideband acoustic systems were elaborated, and a general methodology for wideband acoustic data analysis was presented using data collected in frequency modulation mode for the first time in Republic of Korea. In particular, this study described the data recording method using the mission planner of the wideband autonomous acoustic system, wideband acoustic data signal processing, calibration and the wideband frequency response graph. Since wideband acoustic systems are currently installed on many training and research vessels, it is expected that the results of this study can be used as basic knowledge for fisheries acoustic research using the state-of-the-art system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.131-133
• /
• 2007

This paper was described about the calibration method and setup of calibration system. This method and system were based on ISO 12713 and 12714. This system consisted of a conical type reference sensor, test block, glass capillary source and measuring oscilloscope. The waves of reference sensor and tested sensor was shown and these wave was analyzed with ISO method.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.318-324
• /
• 2016

Commercial split beam echosounder (ES70) installed on a krill fishing vessel was calibrated in order to utilize it in estimating biomass of Antarctic krill (Euphausia superba). The method of calibration was to analyze the difference between the bottom backscattering strength of the commercial split beam echosounder (i.e. ES70) and the scientific echosounder (i.e. EK60) at one of transects near South Shetland Islands designated by CCAMLR. 38 kHz and 120 kHz were used for the calibration, and krill swarm signal levels obtained from multi frequencies, was examined to verify the calibration result. The analysis result indicated possibility of calibration by bottom backscattering strength, since the proportion of krill swarm signals within 2 dB < $S_{V\;120\;kHz-38\;kHz}$ < 12 dB (i.e. a common $S_{V\;120\;kHz-38\;kHz}$ range of 38 kHz and 120 kHz to be an indicator of Antarctic krill) over the total acoustic signals were 26.95% and 92.04%, respectively before and after the calibration.

• 지질공학
• /
• 제6권2호
• /
• pp.53-58
• /
• 1996

암석 시료의 파괴시에 발생하는 AE신호를 측정하여 파괴와 관련된 미세균열의 발생원에 대한 연구를 위하여서는 탐촉자에서 기록장치까지 전과정에 대한 검증이 필요하다. 특히 탐촉자는 기계적인 진동을 전기신호로 전환하는 기능을 가진 예민한 장치로서 다양한 인자에 의하여 예민도가 달라질 수 있기 때문에 보정시험을 실리하여야 한다. 압전 압력형 PAC 탐촉자를 NBS나 DG의 변위형 탐촉자에 의하여 보정하는 시험을 실시하였다. NBS 및 PAC탐촉자는 파의 입사방위각에는 무관하나 입사각에는 예민하게 반응한다. 즉, 입사각이 $90^{\circ}$ 일 때에는 입사각 $15^{\circ}$ 이하 일 때보다 약 10배의 큰 출력을 나타내었다. 또한, 시험에 사용된 PAC 탐촉자가의 경우 강도에 대한 개별 예민도의 차이가 최대 약 40%이었다. 압력형 PAC 탐촉자는 변위형 표준탐촉자로 절대치 보정시험을 실시한 결과 보정계수는 평균 77mv/pm이었다.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.463-471
• /
• 2003

본 논문에서는 아시아ㆍ태평양 지역에서 실시한 음향교정기의 국제비교 결과를 검토, 분석하였다. 국제비교에 사용된 음향교정기는 음압레벨교정기와 피스톤폰이었으며, 출력음압레벨을 측정하기 위해 사용된 마이크로폰은 1" 및 1/2" 표준마이크로폰 (LS1P, LS2P)과 1" 및 1/2" 기준 마이크로폰 (WS1P/F, WS2P/F)이다. 표준 마이크로폰을 이용하여 측정한 결과는 만족스러웠으나 기준 마이크로폰을 사용하여 측정한 결과는 En 값이 ±1.0 이내에는 들었으나 상대적으로 큰 편차를 보였다. 이러한 결과는 기준 마이크로폰의 음압감도레벨의 부정확한 교정으로 나타났다. 새로이 제정된 기준 마이크로폰의 비교교정에 따라 정밀 교정한 값을 사용한 결과 외국 표준기관들이 측정한 출력음압레벨과 유사한 값을 얻을 수 있었다.

• 정보저장시스템학회논문집
• /
• 제8권1호
• /
• pp.16-21
• /
• 2012

SAW device is widely used as filters, sensors, actuators in various technologies. And capacitive sensor is tremendously used to measure pressure, gap, etc. The application of SAW device as signal conditioner of capacitive sensor reduces noise level and enables high precision measurement. The response increase of SAW based capacitive sensor is produced just before the two capacitive electrode contacts by the existence of parasitic resistance of capacitive electrode. In this paper, we analyze the effects of parasitic resistance and propose the calibrating method using lumped component and execute the high precision gap measurement using calibrated system. And xx nm resolution and yy ${\mu}m$ stroke was attained.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1697-1702
• /
• 2004

In this paper, we proposed the design and calibration method for the near infrared Acousto-Optic Tunable Filter (AOTF). The theory and design principles of AOTF for the visible light are well known since I.C.Chang has developed the parallel tangent condition for the non-collinear AOTF. Deflection angle, frequency-wavelength relation, spectral resolution, etc. were calculated based on the theory of AOTF. From this result, important parameters - incident and acoustic angle - to fabricate AOTF were decided. We measured the spectral resolution and the relation between electrical driving frequency and the Optical wavelength of diffracted light to calibrate the near infrared AOTF. About 40 ∼ 80 MHz electrical frequency was required to get 1200 ∼ 2200 nm near infrared light. Spectral resolution was less than 10 nm in the near infrared region.