• Journal of Korea Water Resources Association
• /
• v.44 no.9
• /
• pp.731-740
• /
• 2011

An acoustic velocity profiler is developed, which is able to be used for open-channel flow measurement. It measures flow velocity based Doppler effect on acoustic signals, which is estimated by using pulse repetition frequency technique. Laboratory and field tests were made to verify velocity measuring performance of the developed device. It is confirmed that the acoustic velocity profiler can normally measure vertical velocity profile in the range above 0.1 m from the bottom and has equivalent performance to commercial acoustic velocity measuring devices.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.51-56
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in tensile test of high strength fire resistance steel for frame structure with time frequency analysis methods. The results obtained are summaries as follows ; In the T and TN specimen consisting of ferrite and pearlite grains, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$ - 10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point the second is after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min specimens, many signals were observed from area before yield point and counts were decreased after yield point.

• Phonetics and Speech Sciences
• /
• v.5 no.3
• /
• pp.55-60
• /
• 2013

The purpose of this study was to investigate the acoustic characteristics of crying infants according to the communication intents such as hunger and pain in terms of acoustic differences in the fundamental frequency ($F_0$), jitter, shimmer, noise-to-harmonic ratio(NHR), habitual pitch, and intensity. The subjects were 20 healthy, normal infants, less than seven days old, from the city of Seoul and were born after 38 to 42 weeks(full term) of pregnancy. The sound of crying was recorded for three minutes. The crying due to pain was induced by means of the inborn metabolism error test, whereas the crying due to hunger was verified by means of the rooting reflex by waiting for the designated eating time. The results were as follows: (1) the fundamental frequency, noise-to-harmonic ratio(NHR), and intensity of the infants' crying due to pain was higher than that by hunger, showing a significant difference between the mean values. (2) the infants' crying due to hunger and that by pain did not have a significant difference in the mean jitter and shimmer values but both of them were largely outside of the normal threshold values(jitter by 1.04% and shimmer by 3.81%). This study was significant in the sense that it showed the acoustic characteristics of infants' crying from hunger and pain were very different from each other according to the communication intents in terms of the six acoustic parameters.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.5-12
• /
• 2016

This paper describes the development process for vibration and acoustic characteristics of a balanced armature speaker. The design parameters were chosen in consideration of the influence of the bending stiffness of balanced armature which is the form of a cantilever structure in the speaker. For study of the performance of the speaker according to the design parameters, in the first step, we analyzed the characteristics of the velocity of the diaphragm to the electrical input. Next step, acoustic characteristics were analyzed by structural-acoustic coupled analysis. And the reliability of the analysis was verified by comparing the result of analysis with test results. Finally, we proposed a design method for implementing an enhanced balanced armature speakers through analysis method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.357-364
• /
• 2011

In this study, ring-shaped acoustic resonators were proposed to be installed in a silencer to increase the acoustic performance of silencer in the low-frequency range. Evaluation of noise reduction performance of acoustic resonator arrays was carried out by measuring the random-incidence absorption coefficient. It was found that the absorption coefficient of resonator array was measured up to 1 at 125 Hz of 1/3-octave band center frequency. Insertion losses of silencers with ring-shaped acoustic resonator arrays were measured based on ISO 7235. The results were shown that the ring-shaped resonator could increase the insertion loss up to 13 dB without flow, whereas 7 dB when flow speed reached 15 m/s. As increasing the flow speed above 15 m/s, the effect of acoustic resonator decreased due to the effect of nonlinear air damping of the resonator. It was also found that the increment of pressure drop by the presence of resonator arrays was about 9 % at flow speed of 25 m/s.

• Ocean and Polar Research
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2009

When evaluating acoustic methods for measuring physical parameters in the ocean, economical and technical considerations are paramount. As an indirect method of estimating ocean dynamics, acoustic tomography has advantages over more conventional approaches. It allows the reconstruction of temperature and flow fields from the acoustic impulse time-of-flight measured along the rays propagating from the source to the receiver. However, many problems require complicated and expensive systems. To use the acoustic tomography method to best effect, developing hardware systems with sources and receivers mounted permanently on the sea bottom is crucial. Akulichev et al. presented some experimental results from shallow zones of the World Ocean that served as a motive for developing a multifunction system with acoustic hardware and software. Here we present technical features and the sea test results of the system.

• Journal of Biomedical Engineering Research
• /
• v.30 no.6
• /
• pp.529-534
• /
• 2009

One of the characteristics of the hearing impaired is that their frequency selectivity is poorer than that of the normal hearing. To compensate this, formant enhancement algorithms and spectral contrast enhancement algorithms have been developed. However in some cases, these algorithms fail to improve the frequency selectivity of the hearing impaired. One of the reasons is the acoustic masking among enhanced formants. In this study, we tried to enhance the formants based on the individual masking characteristic of each subject. The masking characteristic used in this study was minimum level difference (MLD) between the first formant to the second formant while acoustic masking was occurred. If the level difference between the two formants in each frame is larger than the MLD, the gain of the first formant was decreased to reduce the acoustic masking that occurred among formants. As a result of the speech discrimination test, using formant enhanced speeches, speech discrimination score (SDS) of the speeches having differently enhanced formants was significantly superior to SDS of the speeches having equally enhanced formants. It means that suppression of the acoustic masking among formants improve frequency selectivity of the hearing impaired.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.146-154
• /
• 2010

The effects of severe plastic deformation, equal channel angular pressing, and annealing of Al 5052 alloy on elastic modulus have been studied. The AI 5052 alloy was plastically deformed by ECAP method after solution treatment, and then finally annealing heat treated. Elastic modulus was measured by conventional tensile and nano-indentation test, and also measured on the surface of the specimen using acoustic material signature of the acoustic microscope. The variation in the elastic modulus influenced by plastic deformation and heat treatment, inaccessible by the conventional techniques, was successfully measured by acoustic material signature and obtained the elastic modulus depending on crystal orientation at each grain.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.119-127
• /
• 2014

An epoxy coating applied to the concrete surface of a containment building deteriorates in hazardous environments such as those containing radiation, heat, and moisture. Unlike metals, the epoxy coating on a concrete liner absorbs and discharges moisture during the degradations process, so it has a different density and volume during service. In this study, acoustic impedance was adopted for characterizing the degradation of a glass-reinforced epoxy coating using the acoustic reflection coefficient (reflectance) on a rough epoxy coating. For estimating the acoustic reflectance on a wavy epoxy coating surface, a probabilistic model was developed to represent the multiple irregular reflections of the acoustic wave from the wavy surface on the basis of the simulated annealing technique. A number of epoxy-coated concrete specimens were prepared and exposed to accelerated aging conditions to induce an artificial aging degradation in them. The acoustic impedance of the degraded epoxy coating was estimated successfully by minimizing the error between a waveform calculated from the mathematical model and a waveform measured from the surface of the rough coating.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.785-790
• /
• 1994

The active noise control which regards the acoustic power as a target function to be minimized, is analyzed to test its feasibility of which simplifies the measurement system compared with the global acoustic energy based active noise control system. In fact, it is found that the acoustic power based active noise control strategy is equally likely as good as the global acoustic energy based active noise control method if the acoustic field of interest is diffusive or very low model density one. In the intermediate model density field, we also demonstrate that the power based control gives the similar results as the energy based control in terms of global sound energy reduction for the lightly damped enclosure which might be most important system in practical application. From all the theoretical and power based control strategy is dependent on the characteristics of the acoustic field to be controlled; i.e., the model density distribution, the degree of reverberation, and on the strength of modal interaction of the control source with the primary source; i.e., the location of control source.