• 한국군사과학기술학회지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2023

The skin structure of sensor pod mounted on the exterior of aircraft can be exposed to the acoustic dynamic load and static load such as aerodynamic pressure and inertial load during flight. Fatigue life prediction of structural model under acoustic load should be performed and also differential stiffness of model modified by static load should be considered. The acoustic noise test spectrum of MIL-STD-810G was applied to the structural model and the stress response power spectral density (PSD) was calculated. The frequency response analysis was performed with or without prestress induced by inplane static load, and the response spectrum was compared. Time series data was generated using the calculated PSD, and the time and frequency domain fatigue life were predicted and compared. The variation of stress response spectrum due to static load and predicted fatigue life according to the different structural model considering mean stress were examined and decreasing fatigue life was observed in the model with prestress of compressive static load.

• Structural Monitoring and Maintenance
• /
• 제7권1호
• /
• pp.13-25
• /
• 2020

One of the most important aspects in structural health monitoring is the detection of fatigue damage. Structural components such as heavy-duty bolts work under high dynamic loads, and thus are prone to accumulate fatigue damage and cracks may originate. Those heavy-duty bolts are used, for example, in wind power generation and mining equipment. Therefore, the investigation of new and more effective monitoring technologies attracts a great interest. In this study the acoustic emission (AE) technology was employed to detect incipient damage during fatigue testing of a M36 bolt. Initial results showed that the AE signals have a high level of background noise due to how the load is applied by the fatigue testing machine. Thus, an advanced signal processing method in the time-frequency domain, the Hilbert-Huang Spectrum (HHS), was applied to reveal AE components buried in background noise in form of high-frequency peaks that can be associated with damage progression. Accordingly, the main contribution of the present study is providing insights regarding the detection of incipient damage during fatigue testing using AE signals and providing recommendations for further research.

• 대한후두음성언어의학회지
• /
• 제13권1호
• /
• pp.52-58
• /
• 2002

The pitch range of the human voice is variable, extending from chest register to falsetto. Although numerous studies have investigated after laryngeal mechanism description of registers, systematic and objective studies were lack. The purpose of this study was to analyze and compare head register with chest register of singers acoustically. Fifteen healthy tenor major students were selected. Fifteen healthy untrained adults were the control group for this study. Long term average(LTA) power spectrum using the Fast Fourier transform(FFT) algorithm and Linear predictive coding (LPC) filter response were made during /a/ sustained in both head(G4, 392Hz) md chest registers (C3, 131Hz). Statistical analysis was performed using Mann-Whitney test. In the LTA power spectrum, head register of singer has increased level(energy gain) in the frequency band of 2.2-3.4kHz(p<0.01), and 7.5-8.4kHz(p<0.01, p<0.05). Chest register of singer has increased level in the frequency band of 2.2-3.1kHz(p<0.01), 7.8-8.4kHz(p<0.05) and around 9.6kHz(p<0.01). LTA power spectrum reveals a peak of acoustic energy around 2500Hz known as the singer's formant and another peak of acoustic energy around 8000Hz in singer's voice.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 2호
• /
• pp.147-150
• /
• 1999

본 논문에서는 Cross-Spectrum법에 의한 임펄스 응답을 추정할 때의 창함수의 영향을 살펴본다. 여러종류의 창함수에 대해 전달함수의 지연시간과 창함수의 길이의 관계를 조사하고, 측정에 의해 비교 확인하였다. 음향 전달계의 임펄스 응답 추정치의 평가식을 이용하여 창함수중 Riesz 창함수의 추정 정확도가 대체로 양호함을 확인했다.

• Journal of Biosystems Engineering
• /
• 제23권1호
• /
• pp.67-74
• /
• 1998

A nondestructive quality inspection technique using acoustic impulse response method was developed for eggshell inspection. An experimental system was built to generate the impact force, to measure the response signal and to analyze the frequency spectrum. This system includes an impulse generating unit, an egg holding seal a microphone with preamplifier, and a DSP board installed on Personal Computer. A simple algorithm .was developed for crack detection. Using the developed system with algorithm, crack detection ability was evaluated and the error rate to estimate the normal egg as cracked was found to be 4% and the error rate to estimate the cracked egg as normal was also found to be 4%. This system could be adopted in industry with some modification.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1984년도 추계학술발표회 논문집
• /
• pp.27-32
• /
• 1984

When chopped light inpinges on some condenced matters such as HgS, HgI2 and GaSe semiconductors, in an enclosed cell, the acoustic signals are produced within the cell. These acoustic signals were detected by using a gas-phase microphone in order to investigate the physical properties of the samples. In order to carry out investigation, PA-cell was first designed and made so as to produce higher sensitivity to acoustic signals. Second, an analysis of the photoacoustic spectrum of the various compounds was carried out to obtain the intensity of the PA-signal in terms of light wavelength and to calculate the energy band gaps occuring according to energy transitions. The agreement between the results obtained by this conventional PAS technique and the results obtained by the optical spectrum method was good. In additional analysis conducted on the basis of the R-G theory and the Sze theory are capable of determining the characteristics of energy transition of semiconductors.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.47-54
• /
• 2003

Research during the past several years has established the effectiveness of acoustic emission (AE)-based sensing methodologies for machine condition analysis and process. AE has been proposed and evaluated for a variety of sensing tasks as well as for use as a technique for quantitative studies of manufacturing process. STD11 has been known as difficult-to-cut materials. The micro-grooving machine was developed for this study and the experiments were performed using CBN blade for machining STD11. Evaluating the machining conditions, frequency spectrum analysis of acoustic emission (AE) signals according to each conditions were applied. Fuzzy clustering method for associating the preprocessor outputs with the appropriate decisions was followed by frequency spectrum analysis. FFT is used to decompose AE signal into different frequency bands in time domain, the root mean square (RMS) values extracted from the decomposed signal of each frequency band were used as features.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1189-1194
• /
• 2002

Acoustic intensity is usually estimated by the cross-spectrum of acoustic pressure at two adjacent micrphones. The cross-spectrum calculated by digital Fourier transform technique will unavoidally have leakage error since the period of signal will not be usually coincident with record length. Therefore, the acoustic intensity estimated by the conventional r]n analyzer will show distorted value. In this paper the expression of the Fourier transformed data of a harmonic signal is formulated when there is leakage error. The method to elimate the effect of leakage error from the contaminated data is also proposed. Some numerical examples show the validation of the proposed method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1156-1161
• /
• 2001

Acoustic intensity is usually estimated by the cross-spectrum of acoustic pressure at two adjacent microphones. The cross-spectrum calculated by digital Fourier transform technique will unavoidally have leakage error since the period of signal will not be usually coincident with record length. Therefore, the acoustic intensity estimated by the conventional FFT analyzer will show distorted value. In this paper, the expression of the Fourier transformed date of a harmonic signal with a single frequency is formated when there is leakage error. The method to elimate the effect of leakage error from the contaminated data is also proposed. Some numerical examples show the validation of the proposed method.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.191-199
• /
• 2019

In this paper, dissimilar friction welding were produced using 15 mm diameter solid bar in chrome molybedenum steel(SCM440) to stainless steel(STS316L) to investigate their mechanical properties. Consequently, optimal welding conditions were n=2000 rpm, HP=70 MPa, UP=140 MPa, HT=10 sec and UT=10 sec when the metal loss(Mo) is 8.6 mm. In addition, an acoustic emission technique was applied to evaluate the optimal friction welding condition. AE parameters including the cumulative count, amplitude and energy showed a various changes according to the friction condition. A continuous type waveforms and low frequency spectrum was presented in friction time. On the other hand, a burst type waveform and high frequency spectrum was exhibited in pressing time.