• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.426-430
• /
• 2003

본 연구에서는 초음파현미경의 기하학적 원리와 초음파현미경의 특징중 하나인 V(z)곡선의 간섭파형을 시뮬레이션 하였고, 실제 초음파현미경의 V(z)곡선법을 이용하여 미소영역에서의 누설탄성표면파 음속을 측정하였다. 초음파현미경을 이용한 V(z)곡선법의 음속측정결과가 시뮬레이션 음속값과 큰차이를 보이지 않으므로 미소영역에 초음파현미경의 V(z)곡선법을 적용하여 초음파의 음속측정이 가능함을 확인하였다. 이는 향후 초음파현미경을 이용하여 미세한 재료의 물성평가에 적용할 수 있을 것으로 기대된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.111-116
• /
• 2009

As an experimental technique to analyze the far-field characteristics of underwater cylindrical array sensors, cylindrical acoustic holography is studied. Inside an laboratory water tank, far-field directivity patterns as well as near-field source images are reconstructed from the measured hologram by hydrophone array. Approximate equation for far-field directivity estimation is derived based on stationary phase method. The simulation and experiment show well usefulness of the proposed method in application of underwater array sensors.

• The Journal of the Acoustical Society of Korea
• /
• 제15권1E호
• /
• pp.70-76
• /
• 1996

We proposed to use shear waves instead of longitudinal waves in a STAM (scanning tomographic acoustic microscope system) in which the specimens are solid. For any specimen with a shear modulus, mode conversion will take place at the water-solid interface. Some of the energy of the insonifying longitudinal waves in the water will convert to shear wave energy within the specimen. The shear wave energy is detectable and can be used for tomographic reconstruction. The resolution limitation of STAM depends on the available angular view and the acoustic wavelength. While wave transmission in most solid specimens is limited to about 20°for longitudinal waves, we show that it is about twice that high for shear waves. Since the wavelength of the shear wave is shorter than that of the longitudinal wave, we are able to achieve the high resolution. In order to compare the operation of a shear-wave STAM with that of the conventional longitudinal-wave STAM we have simulated tomographic reconstruction for each. Our simulation results with aluminum specimen and back-and-forth propagation algorithm showed resolution of a shear-wave STAM is better than that of a longitudinal-wave STAM.

• 한국음향학회지
• /
• 제16권6호
• /
• pp.19-24
• /
• 1997

성덕 대왕 신종 상단부에 위치한 음통의 음향학적 역할을 규명하기 위하여 현장 실험을 수행하고 관찰된 현상을 설명하기 위한 모델을 제안하였다. 실험을 통하여 음통의 음향학적 특성을 대표하는 음통 출구단의 반사 계수, 방사 임피던스를 측정한 결과, 음통이 저주파(이경우 300Hz 이하)에서는 거의 모든 소리를 종 내부로 되돌리는 특성을 보이며, 그 이상의 고주파 성분은 효과적으로 종 밖으로 방사하는 특성을 갖고 있음을 확인하였다. 또한 음통에 대한 음향학적 모델링 및 이를 바탕으로 한 수치적 분석을 수행하였으며 실험결과와 대체적으로 경향이 일치하는 결과를 보여주고 있다.

• Journal of information and communication convergence engineering
• /
• 제8권6호
• /
• pp.640-644
• /
• 2010

When we talk with hands-free in a car or noisy lobby, the performance of the echo canceller degrade because background noise added to echo caused by the distance from mouth to microphone is relatively long. It gives a reason for necessity of noise-robust and high convergence speed adaptive algorithm. And if acoustic echo canceller operated not perfectly, residual signal going through the echo canceller to far-end speaker remains residual echo, which degrade quality of talk. To solve this problem, post-processing needed to remove residual echo ones more. In this paper, we propose a new acoustic echo canceller, which has noise robust and high convergence speed, linked with linear predictor as a post-processor. By computer simulation, it is confirmed that the proposed algorithm shows better performance from acoustic interference cancellation (AIC) viewpoint.

• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.49-58
• /
• 2012

This paper is on an improved orthogonal projection method which can cancel the acoustic feedback signals in the digital hearing aids. Comparing with the NLMS algorithm which is widely used for simplicity and stability, it shows that this method has the improvement of the convergence performances, and has small computational quantities, for signals with the large auto-correlation as speech signals. This uses the improved orthogonal projection algorithm which reduces the correlation of signals. To verify the convergence characteristics of the proposed algorithm, we simulated about various input signals. The acoustic feedback canceller has a 12-bit resolution with 64-tap adaptive FIR filter. And we compared the results of simulation for this algorithm with the ones for the NLMS algorithm. By these works, it is proved that the feedback canceller adopting the proposed algorithm shows about 3.5dB more high SNR than the NLMS algorithm in the colored input signals.

• 한국수산과학회지
• /
• 제52권6호
• /
• pp.702-708
• /
• 2019

The range resolution of echo sounders can be improved by enhancing the transducer bandwidth. We designed a bandpass matching network for expanding the bandwidth of a transducer by scaling in both impedance and frequency after transforming a lowpass network into a bandpass configuration for a third-order Bessel filter. We measured the effect of the Bessel matching network for a 50 kHz sandwich type transducer on the transmitting voltage response (TVR), receiving sensitivity (SRT) and figure of merit (FOM), using a chirp echo sounder system. Both the simulation and experimental results indicated that the transducer with a bandpass matching network was capable of producing a symmetrical acoustic output over a wider bandwidth (8.25 kHz) than was the transducer without a matching network (3.75 kHz). By implementing the Bessel matching network, we achieved a 120% bandwidth enhancement.

• 소음진동
• /
• 제7권2호
• /
• pp.215-222
• /
• 1997

The flow and acoustic fields due to a vortex ring interaction with a rigid sphere are simulated numerically. The flow field is regarded as three-dimensional inviscid and incompressible. The vorticity is assumed to be concentrated inside the finite core of vortex filament. The vortex filament curve, described by parabolic blending curve function, is used to effectively solve the modified Biot-Savart equation. The interaction between a vortex ring and a rigid sphere using the parabolic blending curve is calculated. The trajectory of the vortex ring is obtained with several different initial positions between the ring and the sphere. The force variations acting on the sphere are calculated by using the boundary integral method. Finally, we can also obtain the acoustic signals at the far field observation positions from the force variations acting on the rigid surface. We can find that the dipole axis of the directivity patterns are rotated during the interacting phenomena.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1611-1620
• /
• 2005

This paper shows the use of wavelet transformation combined with inverse acoustics to reconstruct the surface velocity of a noise source. This approach uses the boundary element analysis based on the measured sound pressure at a set of field points, the Helmholtz integral equations and wavelet transformation for reconstructing the normal surface velocity field. The reconstructed field can be diverged due to the small measurement errors in the case of nearfield acoustic holography (NAH) using an inverse boundary element method. In order to avoid this instability in the inverse problem, the reconstruction process should include some form of regularization for enhancing the resolution of source images. The usual method of regularization has been the truncation of wave vectors associated with small singular values, although the order of an optimal truncation is difficult to determine. In this paper, a wavelet transformation is applied to reduce the computation time for inverse acoustics and to enhance the reconstructed vibration field. The computational speed-up is achieved, with solution time being reduced to $14.5\%$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.645-651
• /
• 2003

The system in which a microphone and a loudspeaker are simultaneously used can cause an echo. The echo is caused by feedback between the output of the loudspeaker and the input of the microphone. The acoustic echo canceller is a device to cancel the echo in a communication system. Its general procedure for cancellation is first estimating the plant response of the feedback path and then eliminating the feedback signal from the input signal. In this paper, full-band and sub-band approaches are compared by using some simulation examples.