• 한국자원식물학회지
• /
• 제29권1호
• /
• pp.32-38
• /
• 2016

쪽 종자의 이용성 향상을 위한 기초 자료 확보 측면에서 쪽 종자의 일반성분, 지방산, 무기물, 아미노산 함량 분석과 쪽 종자의 메탄올 추출물을 이용하여 생리활성 효과를 조사하였다. 쪽 종자의 총 열량은 348.00 kcal/100 g이었으며, 일반성분은 수분 7.85%, 탄수화물 67.90%, 조단백 10.10%, 조지방 4.00%, 조회분 10.15%로 구성되어 있었다. 포화지방산의 총량은 0.905 g/100 g이었고, 불포화지방산의 총량은 2.717 g/100 g이었다. 쪽 종자 100 g에 함유된 무기질은 K (549.5 ㎎), Mg (264.4 ㎎), Ca(216.2 ㎎), Fe (12.1 ㎎), Zn (3.0 ㎎) 순으로 많았다. 구성아미노산은 총 15종이 검출되었으며, 이 중 alanine (1,432.6 ㎎/100 g)과 glutamic acid (1,088.8 ㎎/100 g)의 함량이 많았다. 총 폴리페놀 함량은 11.08 ㎎/L였고, 총 플라보노이드 함량은 3.56 ㎎/L였다. 쪽 종자 메탄올 추출물의 생리활성 중 radical scavenging activity는 1,000 ㎎/L일 때 DPPH radical 소거능 86.74%, ABTS radical 소거능 61.74%로 나타났다.

• 한국자원식물학회지
• /
• 제25권1호
• /
• pp.7-13
• /
• 2012

연 종자의 발아 특성을 구명하기 위해 전남 무안산 백련 종자를 이용해 종피의 파상부위, 발아 온도, 황산용액 처리 농도 및 시간별에 따른 종자 무게 변화와 발아율을 조사하였다. 종자를 파상하지 않고 파종한 것은 15일째가 되어도 전혀 발아가 되지 않았다. 그러나 기부를 파상하여 $25^{\circ}C$에서 발아를 시킨 것은 6일 만에 100%가 발아 되어 가장 우수한 결과를 보였다. 종자를 물에 침적시켰을 때 물에 뜬 것(0.90 g)과 가라앉은 것(1.18 g) 모두 발아 되었으나 침적된 종자를 $25^{\circ}C$에서 발아 시켰을 때 발아세가 가장 좋았다. 황산처리는 80% 용액에서 40-160분간 침적처리 했을때 6일째에 100%가 발아해 가장 우수한 발아세를 나타내었다. 종자 채취 후 0개월, 12개월 및 24개월 된 것을 파종한 결과 발아세와 발아율에 차이가 없었다. 위와 같은 결과는 연의 종자번식에 도움이 될 것으로 사료된다.

• 한국의류학회지
• /
• 제31권12호
• /
• pp.1682-1688
• /
• 2007

케나프의 품종과 재배기간에 따라 섬유의 리그닌 함량과 염색성 변화를 검토하였다. Everglaze 41와 Tainung 2, 두 종류의 케나프 품종을 각각 60일과 120일간 재배한 4종류의 시료를 준비하였다. 4종류의 시료의 리그닌 함량은 $11.29{\sim}12.78%$였으며, 품종에 따라서는 차이가 나타나지 않았고 재배기간에 따라서는 60일 재배한 케나프보다 120일간 재배한 섬유의 리그닌 함량이 1% 정도 더 많았다. 케나프 섬유의 염색성은 분자량이 다른 C.I. Direct Red 81과 C.I. Direct Green 26, 두 종류의 염료로 4종의 케나프를 $1{\sim}180$분 동안 염색하였다. 소정의 시간 동안 염색한 후 여액의 흡광도를 측정하여 염착속도를 고찰하였으며 염색된 섬유의 표면색을 측정하였다. 본 연구의 실험결과, Red 81로 염색한 경우, 염착속도가 매우 빨라서 품종에 관계없이 12분 정도에 평형에 도달하였으며 Green 26으로 염색한 경우 염색시간 48분 이상에서 평형에 도달했다. 한편, 염료소모율은 각각 30%와 88%로 Green 26에 대한 소모율이 높았다. 품종에 따라서는 차이가 없었으나 재배기간에 따라서는 약간의 염색성 차이를 보였다. 즉, Red 81로 염색한 경우는 60일과 120일 재배한 케나프의 염색성이 비슷했으나 Green 26으로 염색했을 경우에는 60일 재배한 섬유가 120일 재배한 섬유에 비해 염착속도도 빠르고 표면색도 더 진하게 염색되었다.

• 동아시아식생활학회지
• /
• 제20권2호
• /
• pp.239-247
• /
• 2010

This study was conducted to increase the keeping quality of the minimally processed pear slices during the cold storage. Korean pears, 'Shin-go (Niitaka)', 'Chu-hwang' and 'Won-hwang’ were immersed in 1% ascorbic acid, 0.1% calcium propionate, 1% citric acid, 0.2% N-acetyl cysteine and 0.5 M 4-hexylresorcinol solution for 3 three minutes and then stored at $1{\pm}0.5^{\circ}C$ for 10 days. We have also examined into the firmness and the color difference of pears slices as affected by the application of the anti-browning agents. The firmness of pears slices which that were immersed in 0.1% calcium propionate and 0.2% N-acetyl cysteine solution were not significant at did not differ significantly after 10 days after of cold storage. However, the ${\Delta}E^*$ values of 'Shin-go' slices which that were treated with 0.1% calcium propionate and 0.2% N-acetyl cysteine solution and stored for 10 days decreased by 3.18 and 3.83, when compared with that in of the control, which decreased by 6.36. The ${\Delta}E^*$ values of 'Chu-hwang' slices which that were treated with 0.2% N-acetyl cysteine and 0.1% calcium propionate solution had the slight difference by differed by only 2.09 and 2.14, when compared with that in of the control, which differed by 3.04. The ${\Delta}E^*$ values of 'Won-hwang' slices which that were treated with 1% citric acid and 0.5 M 4-hexylresorcinol were 4.49 and 5.83, respectively, while that in of the control decreased by 8.95. It was assumed that the anti-browning agent treatment had the different activities among varieties of the pear varieties slices, however, application of 0.2% N-acetyl cysteine and 0.1% calcium propionate application had greater the higher antibrowning activity.

• 한국산업보건학회지
• /
• 제16권1호
• /
• pp.68-80
• /
• 2006

This study aimed to prepare the fundamental data and assess the status and trend of exposure level for 5 chemical substances such as sulfuric acid, hydrogen chloride, ammonia, formaldehyde and phenol in manufacturing industry by type of industry, working process, and size of factory, chronological change. Subjects related to this study consist of 146 factories, 12 industries and 17 working processes located in Busan area from Jan. 1997 to Dec. 2001. 1. All 5 kinds of chemical substances by type of industry, working process were generated in chemical manufacturing industry. There were founded in 8 types of industries and 13 types of working processes for ammonia, which is the highest number of in all 5 chemical substances. 2. In terms of the exposure level for 5 chemical substances by type of industry, working process, geometric mean concentration for sulfuric acid was $0.40mg/m^3$ in manufacture of chemicals and chemical products, $0.30mg/m^3$ in compounding process, for hydrogen chloride was 0.57 ppm in manufacture of basic metal, 0.48 ppm in dyeing process, for ammonia was 1.11 ppm in manufacture of rubber and plastic products, 0.94 ppm in buffing process, for formaldehyde was 0.49 ppm in manufacture of wood and of products of wood and cork, except furniture; manufacture of articles straw and plating materials, 0.53 ppm in mixing process, and for phenol were 0.53 ppm in manufacture of chemical and chemical products, 0.55 ppm in compounding process, respectively. Results for 5 chemical substances by type of industry and working process were significantly higher than those of the others(p<0.05). 3. The exposure level for hydrogen chloride, formaldehyde were significantly increased by size of industry (p<0.01). ammonia was significantly decreased by size of industry (p<0.01). 4. In trend of the concentration difference of five chemical substances by chronology, geometric mean concentration for sulfuric acid was significantly increased (p<0.01), hydrogen chloride and ammonia were significantly decreased by year (p<0.05) and for formaldehyde and phenol were decreased in chronological change. According to the above results 5 chemical substances were founded together in a way mixed in the same places one another and concentrations of chemical substances by industry, working process, size of industry and year appeared markedly. The authors recommend more systemic and effective work environmental management should be conducted in workplaces generating five chemical substances.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.997-1007
• /
• 2005

The textile finishing methods utilizing chitosan have been mostly focused on the applications in the improvement of the dyeing of cotton fabrics, or the improvement of hand of the cotton or wool fabrics. On the other hand, it Is difficult to find the application examples in the synthetic fiber fabrics including polyester and nylon fabrics. The aim of this study is to improve the stiffness and the poor wash fastness of the fabrics treated only with chitosan. We tried to improve the softness by employing chitosan and polyurethane mixture solution and to prevent the detachment of the chitosan from the fabric. The treatment was applied to cotton, polyester, and nylon fabrics. The change of the properties of the treated fabrics were investigated. The optimum finishing condition was sought by changing the mixture ratio of the chitosan/PU(polyurethane) solutions. The adjusted ratios of the chitosan/PU solutions were 1 : 0, 1 : 0.25, 1 : 0.5, and 1 : 2 during the mixture solution preparation. Using the KES(Kawabata Evaluation System), the physical and mechanical properties of the finished fabric specimens were analyzed, and hand values of the specimens were calculated through the use of translational formulas. According to the chemical composition of the fibers, chitosan solution or chitosan/PU mixture exhibited wide range of coating effect. Since the chitosan acid solution has high polarity, the bonding force with the cotton fibers is high. By the appropriate addition of PU in the chitosan treatment of cotton, KOSHI and HARI values of the fabric improved. The air permeability of the chitosan/PU treated cotton fabric specimen improved, resulting in the highest value at the mixture of chitosan : PU=1:0.25.

• 대한가정학회지
• /
• 제42권6호
• /
• pp.43-53
• /
• 2004

The purpose of this paper is to investigate the dyeability, antibacterial activity, and deodorization of cotton and silk fabrics dyed with extracted solution from Chrysanthemum boreale. The results are as follows： 1. The optimum conditions of dyeing temperature and time for the cotton fabrics were 90$^{\circ}C$ and 60minutes, while those of the silk fabrics were 60$^{\circ}C$ and 30 minutes respectively. 2. The K/S values of cotton fabrics were slightly higher than those of silk fabrics. The K/S values of both fabrics were slightly increased by mordanting with Cr but were decreased by mordanting with Cu and Fe 3. The colors of the cotton and silk fabrics changed from GY to Y. In both cases, the values of the fabric colors were lowered, and the values of the colors continued to be lowered with Cu and Fe. The chroma and color difference of both fabrics were high and were further increased by mordanting with Cu. 4. The fastness to dry-cleaning and rubbing of the cotton and silk fabrics was very good. The fastness to washing of both fabrics was good except when mordanted with Fe. The fastness to perspiration of both fabrics was fairly good, but the fastness to acid perspiration was poorer than that to the alkaline perspiration. The fastness to light of both fabrics was very poor. 5. The cotton and silk fabrics showed excellent antibacterial activity. Both fabrics mordanted with Cu showed perfect antibacterial activity. 6. The deodorization of the silk fabrics was very good, and that of the silk fabrics mordanted with Cu and Al was excellent, while the deodorization of the cotton fabrics was fairly good.

• 한국지역사회생활과학회지
• /
• 제19권3호
• /
• pp.365-371
• /
• 2008

This study was conducted to determine the potent physiological activity of traditional wild tea ("Don tea"; coin-shaped tea) as affected by different harvesting times, aging periods and extracting temperatures, No difference in anti-oxidative activities in the harvesting time and extracting temperature of tea leaves was observed. However, short aging periods of Don tea showed high ABTS {2-2-azonobis (3-ethylbenzothiazolin-6-sulphonic acid)} activity, ranging from 71.52 to 79.96%. DPPH (${\alpha},\;{\alpha}-diphenyl-{\beta}-picryl-hydrazyl$) radical scavenging activity of Don tea was 71.10 to 91.40%. Especially, longer aging period and an extracting temperature of $100^{\circ}C$ showed higher DPPH radical scavenging activity. With longer aging periods and an extraction at $90^{\circ}C$, nitrite radical scavenging activity of Don tea ranged from 74.04 to 94.92%. On the other hand, angiotensin 1-converting enzyme (ACE) inhibition activity of Don tea was 59.77-81.97%. It showed higher activity when harvested in June and August, aged for longer periods, and extracted at $100^{\circ}C$. These results suggested Korean traditional Don tea exhibited the highest physiological activity when aged over 8 months.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.53-53
• /
• 2011

Poly(lactic acid)(이하 PLA라 칭함)는 1970-80년대의 초기 연구에서는 높은 제조비용과 희귀성에 의해 봉합사와 약물전달시스템으로 용도가 제한적이었으나 1980년대를 거쳐 1990년 이후 농업의 혁신적인 변화를 거쳐 옥수수의 다양한 측면의 이용의 하나로서 6-7년 전부터 양산화에 성공하여, 의류, 필름 및 플라스틱의 여러 가지 분야에서 적용가능성을 모색하고 있다. PLA의 장점은 석유가 아닌 천연 원료에서 얻을 수 있으며, 기존의 합성섬유와는 달리 일정한 조건하에서 미생물 등에 의해 물과 이산화탄소로 90% 이상 분해되는 친환경적인 소재이다. 합성섬유에서 의류용으로 대부분 사용되는 폴리에스테르(이하 PET라 칭함)와 유사한 물성을 가지고 있는 PLA섬유는 PET섬유와 유사한 분산염료로 염색할 수 있다. 따라서 PLA섬유는 분산염료에 의한 염색법을 중심으로 연구되어지고 있으나, PET 섬유의 융점이 $254^{\circ}C$부근인 반면, PLA섬유는 $160-170^{\circ}C$부근이다. 이로 인해 PLA를 섬유로 용도전개에 있어서 약점으로 작용하고 있다. 그러나 PLA섬유는 특유의 경량감과 새로운 촉감 등의 많은 장점을 지니고 있어 여러 가지 용도전개가 되어지고 있다. 초음파는 사람이 들을 수 없는, 사람마다 한계값은 다르지만, 주파수 약 25kHz이상의 음파를 말하며, 주파수가 높고 파장이 짧기 때문에 강한 진동을 수반한다. 초음파의 이용 원리는 Cavitation이라는 현상으로 생성된 기포가 터지면서 강력한 에너지를 방출한다. 이것은 강력하여 사방으로 퍼져 물질표면이나 내부에 영향을 미친다. 섬유에서는 표면에 뭍은 불순물을 제거하는 세정 등에 응용되고 있으며, 염색분야에서도 다양하게 연구되어지고 있다. 본 연구에서는 초음파에 의한 PLA섬유의 염색성을 조사하였다. PLA섬유를 정련하여 초음파작용의 유무에 따라 염색하여 그 결과를 고찰하였다. 초음파 작용에 따른 분산염료의 표면 색변화는 없었으며, 섬유 표면 색 농도의 차이는 초음파 작용에 의하여 저온에서는 차이가 나타나지만, 고온인 $80^{\circ}C$에서는 오히려 낮아졌다.

• 한국지역사회생활과학회지
• /
• 제20권1호
• /
• pp.61-69
• /
• 2009

This study was conducted to examine the chemical composition of kiwifruit skin, and to est its anti-microbial activities and cytotoxicities, thus, exploring ways for the economic utilization of kiwifruit skin. Four varieties of kiwifruit were examined: Daeheung, Bidan, Haegeum No.1 and Hayward. Vitamin C content in the fruit skins of Bidan, Daeheung, Haegeum No.1 and Hayward were 72.44, 67.22, 62.51 and 61.44mg/100g, respectively. Total amino acids content in the fruit skins of Bidan, Haegeum No.1, Hayward and Daeheung ere 808.31, 706.02, 629.07 and 464.83mg/100g dry weight, respectively. K and Ca content ere $17.20-45.70{\mu}g/mL$ and $4.58-10.15{\mu}g/mL$. While, other inorganic matter contents were below $4.89{\mu}g/mL$. Anti-microbial activity of kiwifruit skin extracts, in terms of the diameter of inhibition zone when tested against five gram positive and three gram negative microbial trains (even in the concentration of 2,000mg/L), was less than 14.1mm. The hyperplasia inhibition of lung cancer cells by methanol extracts from Bidan and Haegeum No.1 using concentrations of 800mg/L were 27.7% and 14.5%, however, those from Daeheung and Hayward were below 3% Consequently, it will be useful to know that kiwifruit skin can be added to processed goods which demand for higher concentrations of vitamin C, amino acids, K and Ca.