• Textile Coloration and Finishing
• /
• v.33 no.1
• /
• pp.10-23
• /
• 2021

In order to synthesize the dye suitable for supercritical carbon dioxide(ScCO2) dyeing, a series of azo based disperse dyes were prepared using various aniline derivatives as diazo components and indol derivatives as coupling components. Dyeing process in ScCO2 of the synthesized dyes was performed on PET fiber at 120℃ for 2 hrs under 250bar pressure with 0.5% o.w.f. of dye concentration. The absorption maxima varied from 400 to 580nm depending on the substituted groups in aniline derivatives and the indol derivatives. The dyes showed high molar extinction coefficients(ε) of 27,000~61,000M-1cm-1. Dyed PET fiber exhibited excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• Journal of Fashion Business
• /
• v.14 no.3
• /
• pp.116-127
• /
• 2010

Metal acid dyes are usually used to dye wool fabric to achieve high concentrated color and strong color fastness. However, metal acid dyes contain lots of heavy metal. That causes not only environmental pollution but also diseases to human. In this study, wool reactive dyes instead of metal acid dyes for wool, which are environmental friendly, are compared and analyzed in the evaluation system of their harmfulness, containing heavy metals and examined exhaustion rates and dyeing characteristics.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.29 no.3
• /
• pp.150-158
• /
• 2016

Objectives : We want to know the effect of Gyejakjimo-tang in mice model of acute pain.Methods : We investigated writhing reflex in mice with acetic acid-induced abdominal pain using mice, we observed c-Fos protien expression by immunohistochemistry dyeing method in the paraventricular nucleus(PVN) and supraoptic nucleus(SON) of the hypothalamus.Results : All of Gyejakjimo-tang treated group suppressed acetic acid-induced writhing response as acetic acid injuction group, but in 100㎎/㎏ Gyejakjimo-tang treated group and 200㎎/㎏ Gyejakjimo-tang treated groups represernted significance. All of Gyejakjimo-tang treated groups(50, 100 and 200㎎/㎏ Gyejakjimo-tang-treated group), Fos-positive cells in PNV significantly decreased as acetic acid injuction group, and All of Gyejakjimo-tang-treated groups Fos-positive cells in SON significantly decreased as acetic acid injuction group.Conclusions : The present results showed that the mice pre-treated with the aqueous extract of Gyejakjimo-tang showed analgesic effect on acetic acid-induced abdominal pain.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.1
• /
• pp.33-46
• /
• 2001

The purpose of this study was to investigate the natural dyeability of silk on extract of Artemisia princeps, The experimental items were divided into the mordanting method. comonent of fabric, kind of mordant. The experimental study was done by laundering fastness, abrasion(dry/wet) fastness, perspiration(acid/alkali) fastness, light fastness test and color difference by C.C.M system. The summarized finding resulted from experiments and investigation are suggested as follows; First, in the C. C. M test on mordanting methods, color difference was significantly improved when mordants were treatmented. And the premordanting method showed the highest color difference, color was most yellow-greenish, Second, in the C.C.M test on component of fabrics, color difference of silk was higher than cotton. It is considered that silk has -$NH_2$ , -COOH, -OH than more than cotton. Third, in dyeing-fastness on mordants, laundering fastness showed that color-change was 2~3 grade, the contamination on attached fabric was 4~5 grade. perspiration fastness(acid/alkali) showed 4~5 grade nearly and those of acid was higher than alkali. abrasion fastness(dry/wet) was 4~5 grade and in Fe(3~4 grade) was lower than the other mordants. Forth, in color difference analysis on mordants, Fe(50.0) showed the highest and the order of color difference was alum(16.0), Cu(7.2), Sn(3.5), Al(3.1), Cr(2.3), The Hue was turned into yellow-greenish in alum mordant treatment, the luminocity of color was most dark in Fe(-48.9) and Cu(-7.2), chroma was the highest in alum (15.7) method.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.343-348
• /
• 2006

This study aims to attain gray tone dyed goods by using tannin that is contained in green tea. Tannin is given general name of polyphenol, which has a characteristic that bonds with protein and it is used for food preservative that protects against bacteria, as well as its purpose of black tone dye for silk treatment that has been processed since its early ages. In particular, as tannin reacts with all kinds of metallic mordant and changes to various colors, when tannin acid is combined with iron, it becomes tannin steel and produces gray tone color. Tannin that is contained in green tea is condensed tannins and its structure does not hydrolyze, thus having flavan type structure. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of green tea tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of green tea tannin was at around 273nm, while strong absorption was also observed at below 350 nm. Dye ability of green tea tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consisted highly of gray tones and showed overall gray tone with the combined color of yellow and red after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased, the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Additionally, lightfastness was more on a normal fading.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.172-174
• /
• 2008

The study has attempted to compare the behavior of reactive, disperse and acid dyes when wastewater from these three kinds of typical dyestuffs were treated by chemical coagulation and NF membrane in pilot scale. Disperse dyeing wastewater showed the tendency of easier removal in TOC and COD and especially in color. This is probably due to low water-solubility of disperse dyes compared with reactive and acid dyes and is a positive result in terms of water reuse. Bio-kinetic constants, ${\mu}$max, $K_s$ of reactive, disperse and acid dyes were obtained, implying that their biodegradability are not significantly different.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.225-232
• /
• 2019

The colorants of kale powders were optimally extracted using an 1:1 mixture solvent of ethanol and DMSO at 105℃ for 30 minutes obtaining a high yield of 359.7㎍/mL chlorophylls. Low color fastness of the dyed fabrics with the extracts, particularly against washing and solar radiation, can be overcome by the combined treatments of chitosan, heat setting and tannic acid. Washing fastness to color change was improved from rating 1-2 up to 5 due to the enhanced electrostatic interactions between the colorants and the positive glucosamine unit of the chitosan in the cationized cotton. In addition, the tannic acid treatment contributed to the additional increase in color fastness after the sequential treatments of chitosan pretreatment, dyeing and heat setting.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.1-10
• /
• 1995

The optical behavior of coloring matter extracted from onion's coats, the depression effects of destruction, yellowing and W transmittance of silk treated with color solution of onion's coats color difference of silk fabrics dyed with acid dyes and drycleaning fastness of silk treated with color solution has been investigated. The results are as follows : 1) The coloring matter extracted from onion's coats by alkali-acid method appeared properties of aglycon type. 2) &{\lambda}_{max}&of color solution extracted by distilled water was found at 280 and 327nm. 3) The decrease of tensile strength and the elongation of the silk treated with color solution were depressed but those of untreated silk were increased by irradiation of UV light. 4) The yellowness index of silk treated with color solution showed a little change by irradiation. 5) The UV transmittance of silk treated with color solution was decreased as increasing concentration of color solution. 6) The color difference after dyeing with several acid dyes on treated and untreated silk fabrics showed remarkable changes. 7) Drycleaning fastness of silk treated by color solution was excellent.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.301-309
• /
• 2003

Of the various types of dye that can be used to apply polyamide fibers, acid dyes and pre-metallised acid dyes are great in use so far. However, since these acid dyeings suffer from dye loss during laundering, recourse to an aftertreatment is usually necessary to achieve adequate fastness to washing. In the case of reactive dyes, the characteristically high washfastness of dyeings comes with the concomitant advantages of brightness and low environmental impact. Despite the obvious advantages, the commercialization of reactive dyes for polyamide fibers has not gained widespread success. In this context, the rewards for approach are likely to be considerable. Heterobifunctional reactive dyes were applied to polyamide fibers using various conditions. Optimum conditions and fixation were determined. The forms in which the vinylsulphone and hydrolyzed moieties were examined using HPLC-Mass. In addition, it was found that the extent of the washfastness secured, in terms of both change in color and staining of adjacent multifiber was being acceptable.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.2
• /
• pp.47-52
• /
• 2013

Aim of this study is to investigate the dimensional and shrinkage characteristics of the weft knitted fabrics with Polylactic acid(PLA) knitted yarn. This PLA knitted yarn was made of the biodegradability fiber. The structure of weft knitted fabrics that was utilized for this study is the plain stitch, which is the most basic structure among all weft knitted fabrics. As the stitch length is shorter, the stitch density, courses density, and wales density are more increasing. The stitch density increased as pre-treatment process and dyeing process progressed. On the contrary, the heat setting process made it decreasing. The MR(Machine Relaxation) and DR(Dry Relaxation) standard area shrinkage were increasing as wet process progressed and as the stitch lengths are long.