• YAKHAK HOEJI
• /
• v.39 no.1
• /
• pp.68-77
• /
• 1995

Aluminum magnesium silicate was synthesized by reacting the mixed solutions of sodium aluminate and magnesium chloride with sodium silicate solution in this study. The optimal synthesis conditions based on the yield of the product has been attained according to Box-Wilson experimental design. It was found that the optimal synthetic conditions of aluminum magnesium silicate were as follows: Reaction temperature=$69~81^{\circ}C$; concentration of two reactants, sodium aluminate and magnesium chloride= 13.95~14.44 w/w%; molar concentration ratio of the two reactants, [NaAlO$_{2}$]/MgCl$_{2}$]=3.63~4.00; reaction time= 12~15 min; drying temp. of the product=$70~76^{\circ}C$. Aluminum magnesium silicate synthesized under the optimal synthesis condition was dispersed in 0.75, 1.0 and 1.5w/w% aqueous solution or suspension of six dispersing agents, and the Theological properties of the dispersed systems prepared have been investigated at $15^{\circ}C$ and $25^{\circ}C$ using Brookfield LVT Type Viscometer. The acid-consuming capacity of the most excellent product was 272~278 ml of 0.1N-HCl per gram of the antacid. The flow types of 5.0 w/w% aluminum magnesium silicate suspension were dependent upon the kind and concentration of dispersing agents added. The apparent viscosity of the suspension was generally increased with concentration of dispersing agents and was not significantly changed or decreased as the temperature was raised. A dispersing agent, hydroxypropyl cellulose suspension, exhibited an unique flow behavior of antithixotropy. The flow behavior of the suspension dispersed in a given dispersing agent not always coincided with that of the dispersing agent solution or suspension itself.

• YAKHAK HOEJI
• /
• v.21 no.2
• /
• pp.101-109
• /
• 1977

The effect of humidity on the aging process of hydrous aluminum oxide prepared by the reaction of aluminum chloride and sodium bicarbonate solution at pH 7.8, which was then kept in various atmosphere under relative humidity at 37.deg. was observed by the measurements of acid consuming capacity, X-ray diffraction and IR absorption. The humidity was one of the important factors influencing the aging process of hydrous aluminum oxide during storage. The higer the humidity, the more was accelerated age, crystalize and loss in acid reactivity. Depending on the humidity, the aging product was different, especially, in the case of up to the relative humidity of 72%, it forming bayerite. On the other hand, the hydrous aluminum oxide aged below the relative humidity of 50% was still amorphous even after 120 days storage. When hydrous aluminum oxide was aged under higher humidity, definite IR absorption bands develop as the hydroxys become part of an ordered structure, and it showed their characteristic absorption band around 1630 and 1060 cm$^{-1}$.

• YAKHAK HOEJI
• /
• v.35 no.4
• /
• pp.277-282
• /
• 1991

Rheological, colloidal and micromeritical properties were followed to investigate aging mechanisms of hydrous aluminum oxide suspension using Zeta-meter systems, BET adsorption apparatus, Master sizer and electronmicroscope. The results indicate that hydrous aluminum oxide suspension revealed plastic flow with thixotropy. The viscosity, thixotropy and yield value were increased with increasing concentration. During aging process, the viscosity and thixotropic index were increased by an addition of glycerin, however, sorbitol stabilized aging process of the suspension being accompanied with growth of particle size and reduction in specific surface area, pore area and pore volume, and consistency. Diminution of adsorptive power of the particles was also protected by addition of sorbitol to hydrous aluminum oxide suspension. From these results, one of aging mechanism of hydrous aluminum oxide suspension assumed growth and/or crystallization of colloidal particles in aqueous suspension.

• YAKHAK HOEJI
• /
• v.45 no.1
• /
• pp.23-28
• /
• 2001

Hydrotalcite was prepared by reacting with sodium carbonate, magnesium hydroxide and aluminum chloride solutions in this study. The optimum synthesis conditions based on the yield of the product were established by applying Box-Wilson experimental design. It was found that the optimum synthesis conditions of hydrotalcite were as follows ; reacting temperature : 63~9$0^{\circ}C$, concentration of reactant solution : 18.20~19.82%, molar concentration ratio of two reactants [Mg(OH)$_2$] / (AICl$_3$.6$H_2O$) : 6.0, temperature of washing water : 29.0-34.4$^{\circ}C$, drying temperature : 56-77.6$^{\circ}C$. The physicochemical properties of hydrotalcite as medicine were studied by use of chemical analysis, bulk volume test and acid consuming capacity measurements.

• YAKHAK HOEJI
• /
• v.43 no.6
• /
• pp.689-695
• /
• 1999

Hydrotalcite was prepared by reacting with sodium carbonate, magnesium oxide and aluminum sulfate solutions in this study. The optimum synthesis conditions based on the yield of the product were established by applying Box-Wilson experimental design. It was found that the optimum synthesis conditions of hydrotalcite were as follows; reacting temperature : 48~63$^{\circ}C$, concentration of reactant solution : about 20%, molar concentration ratio of two reactants [MgO]/[Al. sulfate] ; 7.35~8.1, temperature of washing water : 34.4~37.4$^{\circ}C$, drying temperature : 74~81.5$^{\circ}C$. The physicochemical properties of hydrotalcite as medicine were studied by use of chemical analysis, D.S.C. thermogram, bulk volume test and acid consuming capacity measurements.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.3
• /
• pp.195-202
• /
• 2023

The caries activities of some commercially available children's beverages were measured to determine the risk of dental caries and provide basic data for preventing dental caries. For the experimental beverage, the beverages with the highest market share among carbonated beverages, fruit beverages, milk, and fermented milk products sold in the domestic market were selected. As a control, 0.25% glucose trypticase soy broth was prepared and used. The pH of the beverages, titrate acid and buffering capacity, and the acid production and vitality were measured over time after inoculating the beverages with Streptococcus mutans. The pH of children's beverages was the lowest in soda (2.61±0.02), and milk had the lowest in titratable acid (14.00±0.58). Fermented milk (80.33±3.64) had the highest buffering capacity, and carbonated beverage (9.40±1.06) had the lowest (P<0.05). Carbonated beverages (3 hr and 25 min) had the highest acid production, and milk (4 hr) had the lowest. In conclusion, thorough oral hygiene management is necessary after consuming children's beverages because they have a low pH promote high acid production of S. mutans.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.2
• /
• pp.283-294
• /
• 2017

Objectives: The purpose of the study was to investigate the effect of calcium concentration in saliva on dental caries activity after consuming calcium. Methods: A total of 59 adult women aged 20 to 40 years were surveyed for calcium intake. The daily average calcium intake was analyzed through dietary records of the subjects. The subjects were divided into two groups based on daily average calcium intake. Salivary pH and concentrations of minerals in the saliva were obtained from A group and B group. Calcium ($Ca^{2+}$) and magnesium ($Mg^{2+}$) concentrations in saliva were measured by HPLC-Ion chromatography using 15 mM sulfuric acid. The dental caries activity test was quantified by salivary buffer capacity test and plaque pH test. Results: The mean $Ca^{2+}$ concentrations of A group was $12.75{\mu}g/m$, the mean $Ca^{2+}$ concentrations in the B group was $16.30{\mu}g/mL$ (p<0.05) and respectively, $Mg^{2+}$ concentrations were found to be $0.48{\mu}g/mL$ and $0.51{\mu}g/mL$. Calcium intake and calcium concentration in saliva showed a significant correlation (r=0.380). Conclusions: The mean $Ca^{2+}$ concentrations in saliva was higher in the high calcium intake group. Therefore, calcium intake in saliva was correlated with dental caries.

• Journal of Nutrition and Health
• /
• v.25 no.6
• /
• pp.450-460
• /
• 1992

The study was performed to investigate the effect of corn bran as a fiber source on the utilization of thiamin niacin and pantothenic acid in human subjects for 8 weeks. Four different corn bran diets were fed : dry milled fine(DF) dry milled coarse(DC) wet milled fine(WF) and wet milled coarse(WC) Basal diet no corn bran bread added was employed as a control Apparent recovery of each B complex vitamin in urine was estimated to evaluate the vitamin and compared. The utilziation of three B vitamins was affected by the corn bran treatment. Dry milled corn bran had a higher recovery rate of thiamin(dry milled : 233% wet milled : 1.70%) than those receiving wet milled corn bran. Similar recovery pattern of niacin(dry milled : 1.94% wet milled : 1.50%) to that of thiamin was also observed. Particle size seemed to affect the vitamin utilization regardless of type of corn bran. Coarse bran gave a lower recovery value than fine corn bran in genreral. For pantothenic acid the recovery of the vitamin was affected to a greater extent by particle size of corn bran than by type of corn bran milling(fine: 60.22% coarse : 51.51%) Groups consuming wet milled corn bran\ulcorner(5`.57%) excreted more NDF than those fed dry milled corn bran(42.29%) Dry milled corn bran showed little or no water holding capacity poor fecal bulking properties and increased fecal transit time. The results suggest that corn bran supplementation exerts an negative effect on three B vitamin utilization.

• Journal of Nutrition and Health
• /
• v.55 no.5
• /
• pp.523-532
• /
• 2022

Vitamin C is an important physiological antioxidant which neutralizes reactive oxygen species (ROS) and reduces the oxidative stress in the body. Although it has been associated with various diseases, few studies have reported the dose-response relationship between vitamin C intake, storage and functions in the body, including its antioxidant function. The criteria to establish the Dietary Reference Intakes for Koreans (KDRIs) for vitamin C were based on the changes in plasma concentrations and saturation of leukocytes according to intake levels and the effects on antioxidant capacity and risk of metabolic diseases. When establishing the 2020 vitamin C KDRI, while there was no change in the criteria from those of 2015, the reference values were recalculated and revised to reflect changes such as the new standard weight by age. As the number of people consuming dietary supplements has increased over the last decade, only about 10% of adults consume less than the average total vitamin C, but the proportion of adolescents and elderly who consume less than the average is high. On the other hand, as the intake of vitamin C supplements increases, the proportion of people consuming excessive vitamin C is also increasing. There is a body of opinion that it is necessary to establish a vitamin C KDRI for smokers or people with chronic diseases such as the metabolic syndrome, but these standards have not been established due to the lack of supporting scientific evidence. As a result, studies to establish vitamin C KDRI for Korean smokers and patients with the metabolic syndrome, as well as studies on the excessive intake of vitamin C due to supplementation and interactions with other nutrients, are needed.

• Analytical Science and Technology
• /
• v.33 no.4
• /
• pp.186-196
• /
• 2020

A simple and rapid preconcentration method of actinide from seawater using Actinide resin was developed and tested with the seawater spiked with a known U and Th. The developed method of Actinide resin based on column chromatography is less time-consuming and requires less labor compared with a typical co-precipitation technique for preconcentration of actinides. U and Th, which are relatively weak-bonded with Actinide resin among actinides, were used to determine the optimum flow rate of seawater sample and evaluate the capacity of Actinide resin to concentrate actinides from seawater. A flow rate of 50 mL min^-1 was available with Actinide resin 2 mL (BV, bed volume). When 5 or 10 L of seawater containing U were loaded on Actinide resin (2 mL, BV) at 50 mL min^-1, the recovery of U was 93 % and 86 %, respectively. For extraction of actinides bound with Actinide resin, we compared three methods: solvent extraction, ashing-acid digestion, and ashing-microwave digestion. Ashing-microwave digestion method shows the best performance of which is the recovery of 100 % for U and 81 % for Th. For the preconcentration of actinides in 200 L of seawater, a typical coprecipitation method requires 2-3 days, but the developed method in this study is achieved the high recovery of actinides within 12 h.