• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.1
• /
• pp.171-180
• /
• 2007

The purpose of this study is to determine the possibility of using Flos Sophora japonica as natural health food source. To accomplish this purpose, the contents of general and antioxidative nutrients of Flos Sophora japonica a were measured. The contents of carbohydrate, crude protein, crude lipid and ash are 67.76%, 19.87%, 4.61% and 7.76%. And the calories of Flos Sophora japonica Linne was 318.32 Kcal. Total dietary fiber was 25.35% of total carbohydrates. The percentages of water soluble dietary fiber to insoluble dietary fiber were 1.80 % and 23.56 %, respectively. The protein were contained total 18 different kinds of amino acids. The contents of non-essential and essential amino acids were 4,898.78mg and 5,953.51mg. The K was the largest mineral followed by Ca, P and Mg, which means Flos Sophora japonica Linne is alkali material. The contents of saturated fatty acids, monounsaturated fatty acids and polyunsaturated fatty acids were 29.69%, 34.93% and 35.38%. Therefore, the amount of the total unsaturated fatty acid was higher than that of any other plant. The content of vitamin C in Flos Sophora japonica Linne was higher than that of any other plant, which suggest that it could increase blood elasticity. The content of rutin, which is responsible for capillary vessel permeability, was 22.60%. The contents of water soluble antioxidative materials in 1 mL of water-extracted Flos Sophora japonica Linne were 3.9 ${\mu}$g which is comparable to 1233.0 mmol of vitamin C in antioxidant effect. The general nutrients and other antioxidatant bioactive materials in Flos Sophora japonica Linne were also potential materials for good health food. It is expected that follow up study of Flos Sophora japonica Linne through developing processed food and evaluation of their functional properties would provide useful information as a source of medicinal foods.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.33-43
• /
• 2002

Mineral composition and chemical properties of Hwangto (reddish residual soil) that used in feeding of cattles at Iksan, Jeollabuk-do, Korea were examined according to particle size separation such as gravel, sand, silt, coarse clay and fine clay. Mineral composition analyses reveal that gravel and sand are mainly composed of quartz and feldspars and that kaolin mineral and illite are dominant in clay and silt. Iron oxides are mainly included in fine clay. According to chemical analyses of major elements, Al, Fe and $H_2O$ contents are increased with decreasing of particle size. This trend well agrees with increase of clay minerals in smaller particles, Chemical analyses of trace elements indicate that contents of Zn, Rb, Sr, Ba, Pb significantly differ with particle sizes. Ba and Sr are included in feldspars since these elements are abundant in sand containing abundant feldspars. Pb and Sm are abundant in sample before particle size separation, but the contents are significantly decreased after separation. Therefore, most of these elements appear to be existed as removable phase. Nb, La, Th, Ce are more abundant in silt. The contents of all the other trace elements tend to be increased in smaller particles containing more clay minerals. The contents of changeable cations and teachable elements in acid and alkali solutions are high in clay samples. All the above results indicate that using the portion of smaller particle of Hwangto for livestock feed rather than bulk Hwangto can improve cation exchangeable capacity, ion leaching capacity and sorption properties.

• Applied Biological Chemistry
• /
• v.22 no.1
• /
• pp.58-63
• /
• 1979

The solvent extracting of the tobacco has been carried out in order to find out any effects for the removal and/or reduction of nicotine from tobacco without affecting the tobacco flavor. We have now completed the physico-chemical characterization of the solvent untreated/treated tobaccos and 2) the contents of the tar and nicotine in the smoke. The results obtained ate like followings; 1. 3% alcohol extraction reduced the total nitrogen content for the Bright by 36.4%. However, it could not reduce the sugar content. 2. Nicotine content in tobacco leaves was inversely proportional to the dipping time Essentially same results were obtained in anacidic solution and even in a solution containing both alkali and acid. 3. Derivative thermogravimetric(DTG) curves indicated test extraction was effective by removing tobacco leaf components which could decompose or volatilize between the temperature of $150^{\circ}C\;and\;350^{\circ}C$. 4. 3% alcohol extracted leaf have the substantial improvements as following; (1) bulk filling power of 10% and 24% for Burley and Bright tobacco, respectively, (2) combustibility shortening of about 3 minute and 2 minute for Burley and Bright tobaccos, respectively, (3) reduction ratio(%) of nicotine was found to be shout 61.5% and 54.5% for Burley and Bright tobacco, respectively, (4) reduction ratio (%) of tar was obtained to he about 25% and 15% for Burley and Bright tobacco, respectively.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.111-116
• /
• 2011

The characteristics of natural resin, sap of the lacquer tree were examined as an adhesive for the ceramic conservation since it has such outstanding properties like corrosion resistance against acid and alkali, heat-resistance, waterproof, antiseptic and protection against insects. In order to utilize raw lacquer as an adhesive not under the hardening conditions of lacquer like high humidity (RH 75 to 85%) and high temperature (120 to $170^{\circ}C$), but under normal condition, isinglass and animal glue were added to raw lacquer at certain ratio. In addition, the viscosity and the drying time were measured and their possibilities of application were also investigated through measurement of tensile and adhesive strength. As a result of experiment, it was possible to dry at room temperature and RH $50{\pm}5%$ to mix with raw lacquer and glue, and the drying time of sample with animal glue was faster than that of isinglass. Furthermore, the adhesion of sample with glue was increased more than raw lacquer. It seems to be possible to use the environmental friendly traditional adhesive for the ceramic conservation and restoration, if there are studies or examinations of safety of applications on objects and weathering resistance.

• Resources Recycling
• /
• v.32 no.3
• /
• pp.3-8
• /
• 2023

This study discussed production, demand, and future prospects of rubidium, which is an alkali group metal that is highly reactive to various media and requires carefulness in handling, but no significant environmental hazard of rubidium has been reported yet. Rubidium is used in various fields such as optoelectronic equipment, biomedical, and chemical industries. Because of difficulty in production as well as limited demand, the transaction price of rubidium is relatively high, but its detail information such as market status and potential growth is uncertain. However, if the mass production of versatile ultra-high-performance equipment such as quantum computers and the necessity of rubidium use in the equipment are confirmed, there is a possibility that the rubidium market will expand in the future. Rubidium is often found together with lithium, beryllium, and cesium, and may be present in granite containing minerals such as lepidolite and pollucite, as well as in seawater and industrial waste. Several technologies such as acid leaching, roasting, solvent extraction, and adsorption are used to recover rubidium. The maximum recovery efficiency of the rubidium from the sources and the processing above is generally high, but, in many practices, rubidium is not the main recovery target, and therefore the actual recovery effects should depend on presence of other valuable components or impurities, together with recovery costs, energy consumption, environmental issues, etc. In conclusion, although the current production and consumption of rubidium are limited, with consideration of the possible market fluctuations according to the emergence of large-scale demand sources, etc., further investigations by related institutions should be necessary.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.155-163
• /
• 2017

Membrane filtration has become more popular in drinking water treatment recently, since the filtration can control not only particulate matters but also pathogenic microorganisms such as giardia and cryptosporidium very effectively. Pilot-scale ($120m^3/d$ of treatment capacity) and test-bed ($25,000m^3/d$ of treatment capacity) microfiltration experiments were conducted to find optimum operating mode and the critical flux. Optimum operating mode of pilot-test was assessed as inflow 1.0 min, filtration 36.5 min, air backwash 0.9 min, backwash 1.0 min and outflow 1.0 min with 50 LMH ($L/min{\cdot}m3^$) of critical flux. Critical Flux was calculated to be $50L/m^2-h$ (within TMP 0.5 bar) based on the increase formula of the transmembrane pressure difference according to the change of time at Flux 20, 40, 56 and 62 LMH in pilot operation. Chemical cleaning was first acid washed twice, and alkali washing was performed secondarily, and a recovery rate of 95% was obtained in the test-bed plant. The results of operating under these appropriate conditions are as follows. Turbidity of treated water were 0.028, 0.024, 0.026 and 0.028 NTU in spring, summer, autumn and winter time, respectively. Microfiltration has superior treatment capability and performance characteristics in removing suspended solids and colloidal materials, which are the main cause of turbidity and important carrier of metal elements, and it has shown great potential in being an economically substitute to traditional processes (sand filtration).

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.455-460
• /
• 2004

This study was conducted to determine the yield, free radical scavengering effect and total phenol contents of various solvent fractions on the crude and defatted grape seed extract during storage. The optimal condition for the extraction yield, free radical scavengering effect and total phenol contents was $90\%$ ethanol for 6 hour at $70^{\circ}C$. The extraction yield for crude and defatted grape seed at optimal condition was $8.9\%\;and\;9.16\%$, respectively. Also, the strongest free radical scavengering effect with $41.52\;{\mu}g/mL$ was observed in $95\%$ ethanol of defatted grape seed extracted for 6 hour at $70^{\circ}C$. Similar result was observed in total phenol contents of defatted grape seed. The ethyl acetate fraction obtained from ethanol extract of defatted grape seed showed the strongest RC50($12.35\;{\mu}g/mL$) compared to other organic fractions. Free radical scavengering effect of crude and defatted grape seed extracts treated with alkali condition(pH 10) was reduced compared to that of acidic condition(pH 2) during storage far 1 month at $50^{\circ}C$. Overall, more stronger free radical scavengering effect and higher total phenol contents in defatted grape seed extracts was observed than that of crude grape seed.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.842-849
• /
• 2012

The purpose of this study is to determine the possibility of using Agarum cribrosum as a natural health food source. To accomplish this purpose, the contents of the general and antioxidant activities of Agarum cribrosum were measured. The contents of carbohydrate, crude protein, crude lipid and ash were 45.4%, 15.0%, 2.3% and 33.1%. The calories of Agarum cribrosum were 262.3 kcal and total dietary fiber of Agarum cribrosum was 34.0%. The protein contained a total of 18 different kinds of amino acids. The content of amino acids was 12,402.42 mg/100 g. The K was the largest mineral followed by Ca, Na and Mg, implying that Agarum cribrosum is an alkali material. The antioxidant activity of Agarum cribrosum was assessed by various radical scavenging assays using DPPH (2,2-diphenyl-1-picrylhydrazyl), FRAP (ferric ion reducing antioxidant power), reducing power, and ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)). All antioxidant activity of Agarum cribrosum extract increased the concentration of the dependents. Total phenolic contents of Agarum cribrosum extract were $34.1{\pm}2.56mg/g$, and total flavonoids contents were estimated at $4.9{\pm}0.26mg/g$. General nutrients and other antioxidant bioactive materials in Agarum cribrosum were also potential materials for good health food. It is expected that a follow-up study of Agarum cribrosum through developing processed food and evaluation of their functional properties would provide useful information or sources of functional foods.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.22-28
• /
• 2013

In the present study, the possibility of recovering and recycling the silicon carbide(SiC) from a silicon sludge by removing Fe and Si impurities was investigated. Si and SiC were separated from the silicon sludge using centrifugation. The separated SiC concentrate consisted of Fe, Si and SiC, in which Fe and Si were removed to recover the pure SiC. Leaching with acid/alkali solution was compared with the vapor-phase chlorination. The Fe concentration removed in the SiC was 49 ppm, and it was separated by leaching with 1 M HCl solution at $80^{\circ}C$ for 1 h. The Si concentration removed in the SiC was 860 ppm, and it was separated by leaching with 1M NaOH solution at $50^{\circ}C$ for 1 h. The SiC concentrate was chlorinated in a tubular reactor, 2.4 cm in diameter and 32 cm in length. The boat filled with SiC concentrate was located at the midpoint of the alumina tube, then, the chlorine and nitrogen gas mixture was introduced. The Fe and Si concentration removed in the SiC were 48 ppm and 405 ppm, respectively, at $500^{\circ}C$ reactor temperature, 4 h reaction time, 300 cc/min gas flow rate, and 10% $Cl_2$ gas mole fraction.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.760-769
• /
• 1993

Solvent-free low foaming scouring agents(LFSA) were prepared by blending of polyoxyethylene(30) octadecylbenzylammonium chloride(POAC), block copolymer of propylene oxide-ethylene oxide[p(PO-b-EO) glycol], Sedlan FF-200(FF-200) and sulfonic acid-amine condensate of polyoxyethylene(10) nonylphenyl ether(PSAC). In consequence of several tests, FF-200/POAC/p(PO-b-EO) glycol/PSAC/water (20g/10g/5g/5g/60g) mixture (LFSA-5) showed good cleaning power, penetrating ability, emulsifiability and stability to alkali, and gave less problem in water pollution. Scouring effect of LFSA-5 was investigated by the change of percentage of exhaustion before and after scouring at various dyeing temperatures. The percentage of exhaustion of the unscoured PET fabric was 4.5% at $70^{\circ}C$, while that scoured with LFSA-5 was 1.3% at the same temperature, which proved LFSA-5 to be a good scouring agent. Moreover, the foaming power of LFSA-5 measured by Ross and Miles method was 6mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 20mm at $80^{\circ}C$. As a result, LFSA-5 proved a good low foaming scouring agent.