• Clinics in Shoulder and Elbow
• /
• v.25 no.3
• /
• pp.182-187
• /
• 2022

Background: This study was designed to evaluate and compare the diagnostic value of magnetic resonance imaging (MRI) and indirect magnetic resonance arthrography (I-MRA) imaging with those of arthroscopy and each other. Methods: This descriptive-analytical study was conducted in 2020. All patients who tested positive for labrum lesions during that year were included in the study. The patients underwent conservative treatment for 6 weeks. In the event of no response to conservative treatment, MRI and I-MRA imaging were conducted, and the patients underwent arthroscopy to determine their ultimate diagnosis and treatment plan. Imaging results were assessed at a 1-week interval by an experienced musculoskeletal radiologist. Image interpretation results and arthroscopy were recorded in the data collection form. Results: Overall, 35 patients comprised the study. Based on the kappa coefficient, the results indicate that the results of both imaging methods are in agreement with the arthroscopic findings, but the I-MRA consensus rate is higher than that of MRI (0.612±0.157 and 0.749±0.101 vs. 0.449±0.160 and 0.603±0.113). The sensitivity, specificity, negative predictive value, positive predictive value, and accuracy of MRI in detecting labrum tears were 77.77%, 75.00%, 91.30%, 50.00%, and 77.14%, respectively, and those of I-MRA were 88.88%, 75.00%, 92.30%, 66.66%, and 85.71%. Conclusions: Here, I-MRA showed higher diagnostic value than MRI for labral tears. Therefore, it is recommended that I-MRA be used instead of MRI if there is an indication for potential labrum lesions.

• Journal of Veterinary Science
• /
• v.21 no.2
• /
• pp.25.1-25.16
• /
• 2020

Porcine epidemic diarrhea virus (PEDV) emerged into Canada in January 2014, primarily affecting sow herds. Subsequent epidemiological analyses suggested contaminated feed was the most likely transmission pathway. The primary objective of this study was to describe general biosecurity and management practices implemented in PEDV-positive sow herds and matched control herds at the time the virus emerged. The secondary objective was to determine if any of these general biosecurity and farm management practices were important in explaining PEDV infection status from January 22, 2014 to March 1, 2014. A case herd was defined as a swine herd with clinical signs and a positive test result for PEDV. A questionnaire was used to a gather 30-day history of herd management practices, animal movements on/off site, feed management practices, semen deliveries and biosecurity practices for case (n = 8) and control (n = 12) herds, primarily located in Ontario. Data was analyzed using descriptive statistics and random forests (RFs). Case herds were larger in size than control herds. Case herds had more animal movements and non-staff movements onto the site. Also, case herds had higher quantities of pigs delivered, feed deliveries and semen deliveries on-site. The biosecurity practices of case herds were considered more rigorous based on herd management, feed deliveries, transportation and truck driver practices than control herds. The RF model found that the most important variables for predicting herd status were related to herd size and feed management variables. Nonetheless, predictive accuracy of the final RF model was 72%.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.4
• /
• pp.438-452
• /
• 2022

For cuboid and ellipsoid crystallites of LiFePO₄ powders, by X-ray diffraction (XRD) and microscopic (TEM) studies, it is possible to determine the anisotropic parameters of the crystallite size distribution functions. These parameters were used to describe the cathode rate capability within the model of averaging the diffusion coefficient D over the length of the crystallite columns along the [010] direction. A LiFePO₄ powder was chosen for testing the developed model, consisting of big cuboid and small ellipsoid crystallites (close to them). When analyzing the parts of big and small rate capabilities, the fitting values D = 2.1 and 0.3 nm²/s were obtained for cuboids and ellipsoids, respectively. When analyzing the results of cyclic voltammetry using the Randles-Sevcik equation and the total area of projections of electrode crystallites on their (010) plane, slightly different values were obtained, D = 0.9 ± 0.15 and 0.5 ± 0.15 nm²/s, respectively. We believe that these inconsistencies can be considered quite acceptable, since both methods of determining D have obvious sources of error. However, the developed method has a clearly lower systematic error due to the ability to actually take into account the shape and statistics of crystallites, and it is also useful for improving the accuracy of the Randles-Sevcik equation. It has also been demonstrated that the shape engineering of crystallites, among other tasks, can increase the cathode capacity by 15% by increasing their size correlation coefficients.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1140-1147
• /
• 2009

Productivity measurement of construction machinery is a significant issue faced by many contractors especially those involved in earthwork projects. Traditionally, equipment production rate has been estimated using data available in manufacturers' catalogues, results of previous construction projects, or personal experience and assessments of the site personnel. Actual production rates obtained after the completion of a project demonstrate the fact that most of these methods fail to provide accurate results and as a direct consequence, may lead to unrealistic project cost estimations prepared by the contractors. What makes this more critical is that in most cases, inadequate cost estimations lead the entire project to exceed the initial budget or fall behind the schedule. In this paper, a linear regression method to estimate bulldozer productivity is introduced. This method has been developed using SPSS-16 software package. The presented method is used to estimate the productivity of Komatsu D-155A1 series which is commonly used in many earthmoving operations in Iran. The data required for the numerical analysis has been collected from actual site observation and productivity measurement of 60 pieces of D-155A1 series currently being used in several earthmoving projects in Iran. Comparative analysis of the output data of the presented regression method and the existing productivity tables provided by the manufacturer shows that when compared to the actual productivity data collected on the jobsite, a significant increase in accuracy and a remarkable reduction of data variance can be achieved by using the presented regression method.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.127-135
• /
• 2010

The validation of a simulation model is a key to demonstrate that the simulation model is reliable. However, among various validation methods have been introduced, it is very poor to research the specific techniques for the time series data. Therefore, this paper suggests the methodology to verify the simulation using the time series data by Wavelet Transform, Power Spectrum and Coherence. This method performs 2 steps as followed. Firstly, we get spectrum using the Wavelet transform available for non-periodic signal separation. Secondly, we compare 2 patterns of output data from simulation model and actual system by Coherence Analysis. As a result of comparing it with other validation techniques, the suggested way can judge simulation model accuracy more clearly. By this way, we can make it possible to perform the simulation validation test under various situations using detailed sectional validation method, which has been impossible using a single statistics for the whole model.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.4
• /
• pp.287-293
• /
• 2023

Objectives: In this study, dental hygienists' perceptions of dental hygienists' communication and general public's mutual perceptions were compared to seek development directions and plans for improving dental hygienists' communication skills, and furthermore, communication to increase satisfaction between the general public and dental hygienists. This study was conducted to provide basic data on the development and direction of competency improvement education. Methods: From April 1 to April 31, 2023, a survey was conducted through an online link for the general public with dental treatment experience and dental hygienists currently working at dentists in Gwangju and Jeonnam. A total of 258 questionnaires were collected. Independence t-test and paired t-test were performed using SPSS Statistics (ver. 21.0; IBM Corp., Armonk, NY, USA) Results: As a result of analyzing the accuracy of the communication ability of dental hygienists, from the dental hygienist's point of view, general publics perceived that the dental hygienist's underestimation of their own communication ability was actually lower than the dental hygienist's underestimated communication ability. From the general public's point of view, dental hygienists overestimated their communication ability. In fact, dental hygienists perceived their general publics as higher than general public's overestimated communication ability. Conclusions: Based on these results, it is necessary to develop education and operate various educational programs to improve the communication skills of dental hygienists, and to rethink educational accessibility to increase participation in education and to publicize the professionalism of dental hygienists.

• Journal of East-West Nursing Research
• /
• v.29 no.1
• /
• pp.68-77
• /
• 2023

Purpose: The purposes of this study were to develop a predictive model and evaluate this model of turnover in hospital nurses. Methods: Participants were 1,565 nurses from a tertiary hospital in South Korea. Descriptive statistics and a decision-tree analysis were performed using the SPSS WIN 23.0 program. Results: The turnover groups were presented in eleven different pathways by decision tree analysis. There were three high-risk groups with a higher turnover rate than the average, and eight low-risk groups with a lower turnover rate. Among them, two low-risk groups had a 0% turnover rate. The groups were classified according to general characteristics such as position, period of temporary position, clinical career at last working unit, total clinical career, and period of leave of absence. The accuracy of the model was 83.2%, sensitivity 63.7%, and specificity 98.1%. Conclusion: This predictive model of turnover may be used to screen the turnover risk groups and contribute for decreasing the turnover of hospital nurses in South Korea.

• Smart Media Journal
• /
• v.11 no.2
• /
• pp.18-24
• /
• 2022

Problems caused by malicious comments occur on many social media. In particular, YouTube, which has a strong character as a medium, is getting more and more harmful from malicious comments due to its easy accessibility using mobile devices. In this paper, we designed and implemented a YouTube malicious comment detection system to identify malicious comments in YouTube contents through LSTM-based natural language processing and to visually display the percentage of malicious comments, such commentors' nicknames and their frequency, and we evaluated the performance of the system. By using a dataset of about 50,000 comments, malicious comments could be detected with an accuracy of about 92%. Therefore, it is expected that this system can solve the social problems caused by malicious comments that many YouTubers faced by automatically generating malicious comments statistics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1926-1933
• /
• 2022

Parameterized multichannel Wiener filter (PMWF) is a linear filter that can control the trade-off between residual noise and signal distortion using the embedded parameter. To apply the PMWF to noisy inputs, accurate noise estimation is important and multichannel minima-controlled recursive averaging (MMCRA) is widely used. However, in the case of the MMCRA, the accuracy of noise estimation decreases when a directional interference is involved into the array inputs. Consequently, the performance of the PMWF is degraded. Therefore, we propose a noise power spectral density (PSD) estimation method for the PMWF in this paper. The proposed method is based on a consecutive process of eigenvalue decomposition on noisy input PSD, estimation of the target component contribution using directional information, and exponential weighting for improved estimation of the target contribution. For evaluation, four objective measures were compared with the MMCRA and we verify that the PMWF with the proposed noise estimation method can improve performance in environments where directional interfereces exist.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.7
• /
• pp.29-37
• /
• 2023

Due to climate change, interest in crop production and distribution is increasing, and attempts are being made to use bigdata and AI to predict production volume and control shipments and distribution stages. Prediction of agricultural product imports not only affects prices, but also controls shipments of farms and distributions of distribution companies, so it is important information for establishing marketing strategies. In this paper, we create an artificial intelligence prediction model that predicts the future import volume based on the wholesale market melon import volume data disclosed by the agricultural statistics information system and evaluate its accuracy. We create prediction models using three models: the Neural Prophet technique, the Ensembled Neural Prophet model, and the GRU model. As a result of evaluating the performance of the model by comparing two major indicators, MAE and RMSE, the Ensembled Neural Prophet model predicted the most accurately, and the GRU model also showed similar performance to the ensemble model. The model developed in this study is published on the web and used in the field for 1 year and 6 months, and is used to predict melon production in the near future and to establish marketing and distribution strategies.