• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.280-285
• /
• 2012

This study was conducted to establish proper milling condition and harvesting time for improving the milling recovery of head foxtail millet grain. Brown foxtail millet recovery and the percentage of head foxtail millet recovery were significantly different according to the number of hulling and milling time. Also, the interaction of these factors had influence on brown foxtail millet recovery and the percentage of head foxtail millet recovery. To improve the percentage of head foxtail millet recovery, it was effective to hull grain twice and mill for 1.30 minute. 1000-grain weight of brown foxtail millet, brown foxtail millet recovery, hardness of brown foxtail millet, milling recovery, and the percentage of milling recovery of head foxtail millet grain were significantly different according to harvesting day after heading. For improving the ratio of ripened grain and the percentage of recovery of head foxtail millet, it is recommended to harvest 45 days (accumulated temperature : $1,148^{\circ}C$) after heading (DAH) in early maturing Hwangkeumjo, 50 DAH (accumulated temperature : $1,150^{\circ}C$) in mid-late maturing Samdamae and Kyeongkwan1, and 55 DAH (accumulated temperature : $1,168^{\circ}C$) in late maturing Samdachal.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.4
• /
• pp.387-394
• /
• 2015

We analyze heat generation as well as temperature distribution induced by accelerated electron impact on a target in a closed x-ray tube. For the sake of accuracy, we use Monte carlo analysis. This method gives accurate energy deposit in a medium with additional information such as secondary and backscattered electron as well as their paths. A Tungsten coated layer is divided by small rectangular cell which accumulate energy loss of primary electron beam. The cells and their accumulated energy datum are used for the input of finite element analysis. The Maximum temperature rising and temperature distribution were analyzed by transient heat analysis. Some temperature parameters such as target size and coating thickness were varied to investigate temperature sensitivity. Temperatures were compared each other to find primary variable that affect temperature rising on the x-ray target. The results will be helpful in development highresolution x-ray tube and related industries.

• Ocean and Polar Research
• /
• v.29 no.3
• /
• pp.217-231
• /
• 2007

To explore limiting factors of spring bloom caused by waste disposal after dumping activity commenced in the Yellow Sea, we used a 1-dimensional temperature-ecological coupled model. The vertical structure of temperature and vertical diffusivity (Kh) are calculated by the temperature model with sea surface temperature using the 2.5 layers turbulence closure scheme. The ecological model applied results at the temperature model consisted of five state variables (DIN, DIP, phytoplankton, zooplankton, and detritus) forced by photosynthetically available radiation. We simulate year-to-year variations of plankton and nutrients using the coupled model from 1998 to 2000 and compare results of the model with observed data. It turned out that temperature is the growth factor of spring bloom in dumping area. During the winter the weak stratification made sufficient supply of the accumulated nutrients from the sea bed into the upper water column and led to the bloom in the coming spring. Radiation also turned out to be another important factor of spring bloom in the study area. Insufficient radiation of March 1999 showed low chlorophyll-a concentration despite sufficient nutrients in the surface.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.9 no.1
• /
• pp.48-55
• /
• 2013

In this paper, W-DCAP-HTR(Web-based Design Compatibility Assessment Program for High Temperature Reactor) which will be used to check the design criteria for high temperature reactor is newly proposed. To do this, the assessment procedure of the ASME Sec.III Div.5 such as time-dependent primary stress limit, accumulated inelastic strain, and creep-fatigue damage evaluation were investigated. Furthermore, the trend of candidate materials for high temperature reactor was also reviewed. Then, all assessment procedures for high temperature reactor have been computerized to enhance the efficiency and to reduce the possibility of human error during calculating procedure by hand calculation. It can be directly conducted by adopting the actual thermal and structural analysis results. The validation of W-DCAP-HTR has been demonstrated by benchmark analysis.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.69-75
• /
• 2014

Purpose: This paper is aimed at analyzing the heating performance of the vertical closed loop type Geothermal Heat Pump System (GHPS) distributing the farm site and providing basic data of the GHPS. Method: Seedling greenhouse heating was made from October 2012 to May 2013. The seedling greenhouse was divided into 4 sectors (A, B, C and D zone, total $3,300m^2$) with different temperatures. It was heated from 5PM to 8AM, and during the night the greenhouse was covered by non-woven fabric thermal curtains along the upper 2m of the greenhouse for temperature maintenance. In order to analyze the heating performance of the GHPS, power consumption and operating time of the GHPS, inlet and outlet water temperature of the condenser, temperatures of each zone of the greenhouse, and ambient temperature were measured. Results: When operating only one heat pump unit, heat generated in the condenser decreased as the experiment progressed and power consumption increased correspondingly. However, the heating coefficient of performance decreased from 3.3 to 2.0 rapidly. Also, when operating two heat pump units, heat generated in the condenser decreased and power consumption increased. Heating coefficient of performance decreased from 4.5 to 3.7 rapidly. When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and minimum ambient temperature was $-20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. Conclusion: When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and the minimum ambient temperature was $20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. When operating only one heat pump unit, the heating COP was 2.0~3.3, and when operating 2 heat pump units, it was 3.7~4.5. If several heat pumps are installed in one GHPS, it is suggested that all heat pumps be operated except in special cases. Because the scale of the water pumps are set to the scale of when all heat pump units are operating, if even one unit is not operating, the power consumption will increase. That becomes the cause of COP decrease.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.289-296
• /
• 2021

This study aimed to analyze the optimal transplanting date of the floury endosperm rice varieties Hangaru, Seolgeang, Singil, and Baromi2 allowing to reduce the viviparity rate. The viviparity rate rapidly increased with the mean temperature during the ripening stage. Therefore, to reduce the viviparity rate, we calculated the optimum heading date based on the safe heading date limit in each area so that the ripening stage occurred at lower temperatures. hen, the effects of changes in heading date were monitored by recording the transplanting date and the temperature during the growth period. The transplanting date was highly correlated with the number of heading days in the field. Therefore, the optimum transplanting date was calculated according to the transplanting date in each area. When the accumulated temperature was 700℃, if floury rice was transplanted at the optimum transplanting date, the mean temperature was approximately 20℃. When the accumulated temperature was 900℃, the mean temperature was approximately 18℃. Under these conditions, the viviparity rates of Hangaru, Seolgeang, and Singil rice were lower than 10%. However, Baromi2 showed a high viviparity rate. These results suggest that the viviparity rate of Hangaru, Seolgeang, and Singil rice can be reduced by transplanting at the optimum transplanting date. However, further research is required for pinpointing the optimum transplanting date of Baromi2 rice.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.897-900
• /
• 2001

Space charge distributions in silane crosslinked polyethylene (SXLPE)/ crosslinked polyethylene (XLPE) laminates was investigated using a pulsed electroacoustic (PEA) method. XLPE shows heterocharge while SXLPE shows homocharge. Positive charge is accumulated at the interface of SXLPE/XLPE laminate when applied electric field is more than 20 kV/mm. The charge profile at various temperatures was also acquired using temperature-controllable PEA system. Although applied electric field is only 8.6 kV/mm, positive interfacial charge starts to appear near 50$^{\circ}C$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.49-54
• /
• 1997

In this paper, vibration characteristics are considered about thermo-visco-plastic material under periodic thermal loading. When in high temperature region, thermo-visco-plastic structure has a periodic thermal loading, it is very important in an accumulated structure like a spacestation to investigate vibration characteristic, stress-strain characteristic is considered in various 2-D model by finite element method.

• Korean Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.123-128
• /
• 2012

We aimed to estimate the accumulated degree days required for the development of $Cloeon$ $dipterum$ (Ephemeroptera: Baetidae) in an experimental tub under field conditions from August 7 to October 10 in 2011. After 4 days in a tub setting, a dead female adult was found on the water surface at which oviposition had presumably occurred. Adults emerged from 39 days to 61 days after the oviposition date. The total number of emerged adults was 229, and the sex ratio (number of females : total population) was 0.45, although not statistically significant ($p$ >0.05). The males generally emerged earlier than females. Assuming that the basal temperature ($T_b$) value is $0^{\circ}C$, we estimated the number of accumulated degree days required for the development of $C.$ $dipterum$ to be $1,221.8{\pm}116.0$ DD (mean${\pm}$SD). Since the annual number of accumulated degree days in the reference wetland was measured to be 5,650.0 DD, we estimated that $C.$ $dipterum$ is multivoltine, with a maximum of 4 cohorts in 1 year in natural habitats.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.188-192
• /
• 2006

This study is conducted to improve efficiency of thermal storage tank. The thermal storage tank was designed to store heat energy that obtained from solar or the others heat sources. However, it has difficulties in storing heat with uniform temperature through the entire tank with respect to vertical direction. This kind of maldistribution of the supplied heat to the storage tank effects on the system performance. In this study is focused on utilization of the thermal stratification to improve thermal comfort for people in the house. To enhance temperature stratification of the tank, a distributor was designed and Installed in the middle of the tank. The distributor is supplies hottest water to the top side of the tank which is very close to inlet of the supply line to the heating load. The hottest water that is accumulated on top side of the tank is firstly supplied to the load with higher temperature. Reminder water takes a little time to warming up until desired supply temperature reached. This kind alternating selection of the supply temperature is improve thermal comfort with moderated system performance.