• Animal cells and systems
• /
• v.1 no.2
• /
• pp.305-311
• /
• 1997

Dermaptera was investigated, examined and reviewed in taxonomy and for distribution in Youngnam region. Based on the data, the local species groups were measured to choose priority-conservation-area by taxonomic root weighting and distribution analysis at 232 geographical conservation units. Eleven species belonging to 4 families and 8 genera were recorded mounting up to 68.75% of species diversity known in Korea. Found remarkably were the rare and endangered Challia fletcheri Burr at Sobaek Mountain National Park, and unusually Anisolabis maritima (Bonelli) in Taegu, Euborellia pallipes (Shiraki) at Island Geoje and E. plebeja (Dohrn) at Hwanho near Pohang. The highest species diversity was found at the temple Huibang area at Sobaek Mountain National Park with 8 species, which was measured also as the primary priority-conservation-area with 83.41 % of accumulated taxonomic root weighting indices in percentage. Geoje and Hwanho both measured as 12.18% of accumulated taxonomic root weighting index in percentage and complimentary to Sobaek Mountain National Park but supporting 5 and 3 species, respectively. The priority goes to the geographical conservation unit supporting higher species richness between two geographical conservation units in comparison. By the rule, the second priority-conservation-area should be Geoje and the third Hwanho. It is, thus, demonstrated how 11 species can be all conserved by choosing 3 priority-conservation-areas out of 232 geographical conservation units to maintain maximum species in minimum areas.

• Journal of the Korean Society of Tobacco Science
• /
• v.9 no.2
• /
• pp.25-35
• /
• 1987

Effects of application time And rate of chlorine on the chlorine absorption and distribution at different stalk positions of the plants were Investigated in burley tobacco grown under the pot condition. Treatment consisted of 6 application times (from 2 weeks before transplanting to 8 weeks after transplanting with 2 weeks' interval) and 2 application rates (2g and 4g-KCl/pot) by 6X2 factorial experimental design. The tobacco plants took up the chlorine rapidly just after chlorine application, and the chlorine content of leaf was increased proportionally to the rate of chlorine application. The chlorine was accumulated when much in lower leaves when chlorine was applied early, while the chlorine accumulated much in upper leaves when chlorine was applied late. The chlorine content of leaf was negatively correlated to the degree of brightness, red color and yellow color of cured leaf. Significant Increases In cured leaf ratio, leaf thickness, leaf weight and weight Per unit leaf area of harvested leaf were obtained with increased chlorine application. When the chlorine was applied early, the leaf weight showed Increasing tendency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.6
• /
• pp.269-274
• /
• 2014

The experimental performance evaluation of a cylindrical steam reformer with various thermal conditions has been conducted. The bottom space of the cylindrical reactor was packed with Ruthenium (Ru) catalyst. A three-segment furnace was installed to create the axially variable boundary temperature distribution. Six K-type thermocouples were inserted into the catalyst layer, and three exhaust ports were fabricated on the side wall along the flow direction. The exhausted gases at each port were analyzed by using gas chromatograph (GC) system. The experimental results showed that the reforming reaction occurs intensively in the upstream region and more hydrogen is obtained when the intake gas is sufficiently heated up through the enhanced steam reforming (SR) reaction. The axially increasing boundary temperature setup provided the maximally accumulated reforming efficiency of 74.8%, when the reactor was placed at the 3rd section of the furnace.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.97-107
• /
• 2020

To analyze temporal and spatial changes in vegetation, it is necessary to determine the associated continuous distribution and conduct growth observations using time series data. For this purpose, the normalized difference vegetation index, which is calculated from optical images, is employed. However, acquiring images under cloud cover and rainfall conditions is challenging; therefore, time series data may often be unavailable. To address this issue, La et al. (2015) developed a multilinear simulation method to generate missing images on the target date using the obtained images. This method was applied to a small simulation area, and it employed a simple analysis of variables with lower constraints on the simulation conditions (where the environmental characteristics at the moment of image capture are considered as the variables). In contrast, the present study employs variables that reflect the growth characteristics of vegetation in a greater simulation area, and the results are compared with those of the existing simulation method. By applying the accumulated temperature, the average coefficient of determination (R²) and RMSE (Root Mean-Squared Error) increased and decreased by 0.0850 and 0.0249, respectively. Moreover, when data were unavailable for the same season, R² and RMSE increased and decreased by 0.2421 and 0.1289, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.813-816
• /
• 2003

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were applied to Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased, the stronger breakdown strength became at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher. Finally, according to Weibull distribution analysis, reducing breakdown probability of equipment insulation lower than 0.1 % level requires the allowable field intensity values to be kept under 21.5 MV/cm.

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.2
• /
• pp.28-37
• /
• 1988

Light scattering coefficient of visible light by atmospheric aerosol over the size range 0.01-10$\mu$m is determined from scattering efficiency and aerosol size distribution. Aerosol number distribution as a function of particle diameter dN/dlog D decreases rapidly as increasing particle size. Distribution of scattering coefficient d$\sigma_s/dlog$ D is mostly accumulated in diameter 0.1-2.0 $\mu$m showing its maximum in the vicinity of 0.6$\mu$m. This means that the visible light in the atmosphere is mainly scattered by these particles. Diurnal variation of scattering coefficient $\sigma_s$ appears its maximum in the morning, while minimum in the afternoon which agrees with the aerosol number distribution in the size range 0.1-2.0 $\mu$m.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.2
• /
• pp.137-140
• /
• 2009

Chromated copper arsenate (CCA), a long history of successful preservative, have raised environmental concerns. Adsorption characteristics of domestic soils for chromium, copper, and arsenic were assessed by measuring distribution coefficient ($K_d$) values of these metal components in a laboratory scale. The results revealed that $K_d$ values were higher in chromium, followed by arsenic and copper in soil matrix. Different soil matrixes resulted in varying mobilities of CCA components. The values of $K_d$ for all three metals increased with organic matter contents. The results suggest that the mobility of metal components may be very limited to the surface area adjacent to CCA-treated wood due to their fairly large distribution coefficient ($K_d$). However, the metal components would be persistent and accumulated in the soil, resulting in high chemical concentration in service area of treated wood.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.647-651
• /
• 2001

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were applied to Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased, the stronger breakdown strength became at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric filed is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher. Finally, from the analysis of weibull distribution, it was confirmed that to low allowed breakdown probability under 0,.1%, the applied field value needed to be under 21.5MV/cm.

• Korean Journal of Metals and Materials
• /
• v.46 no.3
• /
• pp.150-158
• /
• 2008

The temperature distribution of high speed tool steel rod has been studied during high speed hot rolling procedures. The tool steel rod shows severe temperature gradient during rolling procedures and the temperature at the center of rod are much higher than that at the surface of rod. This temperature gradient accumulated after every rolling procedure and the center of rolled rod could be remelt in some procedures to cause inside defects. In this study, the temperature distribution was simulated using finite element method and the processing parameters such as rolling speed, cooling condition, have been discussed to prevent the temperature increases at the center of rod.

• IE interfaces
• /
• v.25 no.1
• /
• pp.127-133
• /
• 2012

This paper considers the preventive maintenance scheduling problem of the cluster tool which is one of the most important manufacturing equipments in the next-generation semiconductor production environment. We define a random process that expresses the successive amount of chemicals accumulating inside the tool. Based on the renewal theory, we find the expected value and probability distribution of the time that the amount of accumulated chemicals exceeds a predetermined level. For a given probability that the accumulated chemicals exceeds the predetermined level we present a method to obtain the number of chamber operations to perform the preventive maintenance of that chamber. In addition, a method to get the preventive maintenance schedule for the whole cluster tool is presented. A numerical example is provided to illustrate our method.