• 대한인간공학회지
• /
• 제35권3호
• /
• pp.155-163
• /
• 2016

Objective: This study aims to draw the characteristics of occupational accidents occurred in cabling work, and assess accident severity based on occupational injury data. Background: Accident factors and accident risk are different by the place of work in cabling work. Field managers require information on accident prevention that can be easily understood by workers. However, there has been a lack of studies that focus on cabling work in Korea. Method: This study classifies 450 injured persons caused in cabling work by process, and analyzes the characteristics of occupational injuries from the aspects of age, work experience and accident type. This study also analyzes accident frequency and severity of injury. Results: Results show that preparing/finishing (33.3%) was the most common type of cabling process in injuries, followed by maintenance (28.4%), routing/income (23.1%) and wiring/installation (15.1%) process. The critical incidents in the level of risk management were falls from height in the routing/incoming process, and falls from height in the maintenance process. And, incidents ranked as 'High' level of risk management were slips and trips, fall from height and vehicle incident in the preparing/finishing process, and fall from height in the wiring/installation process. Conclusion and Application: The relative frequency of accident and its severity by working process serve as important information for accident prevention, and are critical for determining priorities in preventive measures.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.131-136
• /
• 2017

This study deals with the small-size roundabout accidents. The purpose of this study is to analyze the characteristics of small-size roundabout accidents from developing various types of accident models, and to discuss the improvement countermeasures by vehicle type. The geometric characteristics of 36 roundabouts are surveyed, and the traffic accident data from 2008 to 2014 are collected and classified as those of car, truck and motor cycle. In this study, dependent variable is the number of accident and independent variables are such 15 variables as geometry and traffic volume. The main results are as follows. First, the null hypotheses that the size of roundabout and type of vehicle are not related to traffic accident are rejected. Second, 8 count data models which are all statistically significant are developed. Third, the number of circulatory roadway lane and sidewalk are selected as common variables of roundabout size. Finally, the number of entry and circulatory roadway lane are selected as common variables of vehicle type.

• 지역사회간호학회지
• /
• 제32권1호
• /
• pp.64-72
• /
• 2021

Purpose: The purpose of this study is to analyze occupational accident compensation insurance coverage and occupational accidents incidence for special-type delivery workers. Methods: The data for occupational accident compensation insurance coverage and occupational accidents from 2012 to 2017 were analyzed through descriptive statistics. Results: Rates of occupational accident compensation insurance coverage of special-type delivery workers decreased gradually from 43.4% in 2012 to 28.5% in 2016, and 29.0% in 2017. Rates of occupational illnesses death per ten thousand workers increased gradually from 2.1‱ in 2013 to 3.1‱ in 2016, and 8.6‱ in 2017. All occupational illness deaths were due to cerebro-cardiovascular diseases. Road traffic accidents and slips accounted for the largest proportion of occupational accidents. Conclusion: Special-type delivery workers have a high risk of industrial accidents, so it is necessary to raise industrial accident insurance coverage and provide professional and systematic occupational safety and health services.

• 대한교통학회지
• /
• 제26권5호
• /
• pp.153-162
• /
• 2008

본 연구는 청주시 4지 신호교차로를 대상으로 한 교통사고를 다루고 있다. 연구의 목적은 143개 교차로 사고자료를 이용하여 사고유형별 특성을 비교분석하고 모형을 개발에 있다. 이를 위해 본 연구에서는 정면충돌, 후미추돌, 측면직각, 접촉, 차로변경접촉 등의 모형을 개발하는데 중점을 두고 있다. 분석된 주요결과를 요약하면 다음과 같다. 첫째 가산자료모형 설정을 위해 과산포 검정을 한 결과 음이항 회귀모형이 선정되었다. 둘째, 통계적으로 설명력이 높은 5개의 음이항 모형이 개발되었다. 셋째, 공통변수(ADT)와 특정변수를 활용하여 모형의 차이가 비교 분석되었다.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.135-141
• /
• 2018

Rotary that causes traffic delays and safety issues by high-speed entry vehicles is currently being improved to roundabout. The operational difference between rotary and roundabout can cause driver's confusion and traffic accident. The purpose of this study is to develop the accident rate models which explain the factors related to the accidents by land use and intersection type. The main results are as follows. First, the null hypotheses that the type of land use and two intersections do not affect the accident rate are rejected. Second, the conflicting factors such as the number of crosswalk and bicycle lane should be carefully considered to reduce traffic accident at rotary. In the case of roundabout, greater than 3.5 m in circulatory lane width and two circulatory lane are analyzed to be important to prevent the accidents. Finally, the commercial and mixed areas are evaluated to be weak to traffic accidents than residential area.

• 한국ITS학회 논문지
• /
• 제21권6호
• /
• pp.36-56
• /
• 2022

국내에서 발생하는 교통사고는 손해보험협회에서 작성한 「자동차사고 과실비율 인정기준」에 따라 과실비율을 산정하며, 이를 통해 보험사의 합의나 판결이 내려진다. 하지만, 과실비율 산정에 있어 분쟁이 빈번하게 일어나고 있다. 따라서, 교통사고 발생 시 경찰공무원에 의해 작성되는 교통사고 정보를 이용하여 「자동차사고 과실비율 인정기준」 상의 교통사고 유형을 신속하게 확인할 수 있다면, 보다 효과적인 대응이 가능할 것으로 사료된다. 이에 본 연구에서는 경찰에 의해 작성된 교통사고 정보를 학습시켜 「자동차사고 과실비율 인정기준」 에서 제시하는 교통사고 유형으로 분류하는 모델을 개발하고자 한다. 특히, 데이터마이닝을 통해 경찰청 교통사고 데이터에서 「자동차사고 과실비율 인정기준」 의 교통사고 유형으로 분류하는 데 필요한 핵심어들을 추출하였다. 그리고, 키워드를 의사결정나무 및 랜덤 포레스트 모델을 통해 학습시켜 교통사고 유형을 도출하는 모델을 개발하였다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 춘계학술대회
• /
• pp.19-33
• /
• 2008

The study on semiconductor industrial accident in korea has been focused on frequencies of each type, employee, characteristics, cause and un-safety condition, behaviour and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a well-process and systematic guide lines for efficient safety management. There fore, there were a few studies based on comprehensive survey in terms of sharp-type of safe management. The questionnaire survey carried out for the workers(284) who were responsible for safety management in to center with corporate company with semiconductor industry the factor analysis showed that there were three factor of safety management. They were 1) Investment and operation and management for accident prevention, 2) Unsafe, safety management 3) General human error and behavior the industries of respondents were correlative with three group. Three Groups showed a statistically significant differences on the number of cases. Actually, the group with the larger investment and the better unsafe cause, human error a of accident prevention had a smaller cause of accident cases.

• 대한안전경영과학회지
• /
• 제4권4호
• /
• pp.63-71
• /
• 2002

Accident analyses are used to identify common factors contributing to occupational accidents and to give recommendations for accident prevention. This study concerns with the accident characteristics and prevention in the telecommunication service industry. To investigate the accident characteristics, we used workers' compensation reports and employers' accident analysis reports. Three hundred and forty-five injury accidents which results in more than 4 days absence were surveyed. These data were used to investigate the accident characteristics in terms of company size, injured person's age, work experience, accident time, activity at time of accident, accident type, injured body part, and accident agency. We propose the accident prevention policy based on the accident characteristics. These results can be used to develop more effective occupational safety management policies in the telecommunication service industries.

• 한국안전학회지
• /
• 제38권4호
• /
• pp.15-22
• /
• 2023

LPG-related accidents, which account for half of all gas accidents in Korea, have not shown any sign of decrease over the past decade, partially owing to the lack of effective safety improvement measures. The purpose of this study was to identify the effectiveness of improvement measures by analyzing the traits of accidents in terms of human factors, and to seek more effective accident prevention strategies. In this study, 108 accident cases were collected and analyzed in the aspect of accident characteristics such as violation type, human factors, and so on. The results showed that the work procedures of suppliers and engineers related to LPG accidents seemed to be similar in outward appearance; however, specific accident causes and unsafe behaviors were different. Particularly, type and target of violations were different, which could be visually confirmed by the Principal Component Analysis (PCA) and the Quantification Techniques (QT). Furthermore, for engineers, insufficient supervision was a major influencing factor. In conclusion, because the accident characteristics of suppliers and engineers are different, differentiated accident prevention strategies should be implemented, which was discussed in this study.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.603-608
• /
• 2011

According to the labor related data from Korea Occupational Safety & Health Agency, accident victims of construction industry are increasing 6% annually since 2006. The major reason why the rate of accidents increases in Korea is that lots of labor working with another trades works simultaneously in various type of works. This study analyzes the current accident status in view of the type of building, type of works, and project size for the latest 3 years (2007~2009). As a result, 'single family & semi-detached houses' has the largest number of accidents among buildings. In addition, 'finishing work' shows the highest number in terms of work type. For the size, accidents occurred much for 'less than 300 million'. The results of this study can be used to focus on managing the highly hazardous area where the construction accidents mostly occur; therefore, it is anticipated to contribute to improve efficiency of safety management.