• Title/Summary/Keyword: Accident locations

검색결과 128건 처리시간 0.026초

철도사고유형분류 및 표준화 방안 (The Classification of Railroad Accident Types and Its Standardization)

  • 임광균;김시곤
    • 대한토목학회논문집
    • /
    • 제26권1D호
    • /
    • pp.133-140
    • /
    • 2006
  • 본 연구에서는 효율적인 철도안전관리를 위해 철도사고유형을 재분류하고 이를 표준화하기 위해 표준화된 코드(Code)를 제시하고 있다. 우선, 기존의 국내 외 철도사고유형을 세부적으로 분석하였다. 사례연구를 바탕으로 새로운 철도사고유형은 서로 중복되지 않게 9가지로 분류되었고 40개의 서로 다른 사고형태로 세분화 되었다. 이런 모든 형태는 9개의 사고대상과 6개의 사고위치와 연관된다. 따라서 새로운 철도사고유형을 표준화 하기위해 철도사고의 종류, 철도사고 형태, 철도사고 대상, 철도사고 위치의 4자리 코드 조합을 제시하였다. 또한 현재 사용되고 있는 철도사고DB를 본 연구에서 제안하고 있는 표준코드로 전환하여 사용할 수 있는 방안을 제시하였다. 이러한 코드(Code)는 철도사고 예방, 대비, 대응, 복구로 이루어진 철도안전관리체계구축에서 중요한 역할을 담당할 것이다.

발전소 및 수전해 시스템의 수소 폭발 사고 사례 기반 위험성 평가 및 개선 방안 연구 (A Study on the Risk Assessment and Improvement Methods Based on Hydrogen Explosion Accidents of a Power Plant and Water Electrolysis System)

  • 전민재;장대진;이민철
    • 한국수소및신에너지학회논문집
    • /
    • 제35권1호
    • /
    • pp.66-74
    • /
    • 2024
  • This study addresses the escalating issue of worldwide hydrogen gas accidents, which has seen a significant increase in occurrences. To comprehensively evaluate the risks associated with hydrogen, a two approach was employed in this study. Firstly, a qualitative risk assessment was conducted using the bow-tie method. Secondly, a quantitative consequence analysis was carried out utilizing the areal locations of hazardous atmospheres (ALOHA) model. The study applied this method to two incidents, the hydrogen explosion accident occurred at the Muskingum River power plant in Ohio, USA, 2007 and the hydrogen storage tank explosion accident occurred at the K Technopark water electrolysis system in Korea, 2019. The results of the risk assessments revealed critical issues such as deterioration of gas pipe, human errors in incident response and the omission of important gas cleaning facility. By analyzing the cause of accidents and assessing risks quantitatively, the effective accident response plans are proposed and the effectiveness is evaluated by comparing the effective distance obtained by ALOHA simulation. Notably, the implementation of these measures led to a significant 54.5% reduction in the risk degree of potential explosions compared to the existing risk levels.

교차로, 횡단보도, 터널 구간에서 사고유형에 따른 상대적 위험도 분석 (Analysis of Relative Risk by Accident Types at Intersections, Crosswalk and Tunnel Sections)

  • 이현미;전교석;김형준;장정아
    • 대한토목학회논문집
    • /
    • 제39권6호
    • /
    • pp.841-851
    • /
    • 2019
  • 본 연구는 교차로, 횡단보도, 터널 구간에서 교통사고 유형에 따른 위험 순위를 비교 분석한 것이다. 서울, 경기도에서 발생한 2014년부터 2017년까지의 교통사고자료 중 교통량 및 속도 자료와 결합 가능한 58,868건의 자료를 구축하고, 순서형 로짓모형을 활용하여 사고심각도 추정모형을 구축하였다. 추정된 모형을 기반으로 사고심각도에 영향을 미치는 요인을 규명하고, 영향을 미치는 정도를 살펴보았다. 또한 사고발생위치(교차로, 횡단보도, 터널)별, 사고유형별, 사고발생 시간이나 상황별로 상대적 위험도 분석을 통해 위험순위를 제시하였다. 분석 결과 사고발생 위치와 시간에 따라 사고심각도에 현격한 차이를 보이는 것으로 나타났으며, 분석 자료로부터 산출된 사고 발생 빈도와 사고심각도와 비교해봤을 때, 발생 빈도가 적더라도 사고심각도 측면에서는 위중하거나, 발생 빈도가 높고, 사고심각도 또한 위중한 경우가 존재하는 것으로 분석되었다. 이러한 교통사고유형의 위험 평가를 통해 도로별로 상대적으로 위험한 사고유형에 대한 이해가 가능하고 도로별, 사고유형의 교통사고 위험도 지수 개발에 기초자료 활용할 수 있을 것이다.

하천 및 호소수 수질관리를 위한 자동측정망의 설계 (Design of Automatic Monitoring Network for the Water Quality Management of River Basin)

  • 최지용;박원규;이상일
    • 물과 미래
    • /
    • 제29권2호
    • /
    • pp.167-178
    • /
    • 1996
  • 하천 및 호소수 수질의 온라인 계측을 위한 수질자동측정망의 설계에서 측정위치와 항목의 선정은 전체시스템의 성능을 결정짓는 중요한 인자이다. 본 논문에서는 상수원유역의 상시수질감시 및 사전경보 기능을 갖는 측정망의 구축이 측정위치와 항목을 결정하는 방법을 연구하였다. 측정위치를 결정하기 위한 선정기준은 상수취수량과 고정오염원의 위치를 바탕으로 대상지역에 대한 거시적 후보지점을 선정한 뒤, 구체적인 지점은 오염물질 유하거리를 기준으로 단계적으로 결정한다. 측정항목은 유역의 오염특성과 수질오염사고 이력을 참고하되, 경제적인 측면을 고려하여 필수측정항목과 선택항목으로 나누어 위치별로 달리하는 방안을 제시하였다. 제안방법을 낙동강유역에 적용함으로써 측정망 구성과정을 예시하였다.

  • PDF

독성물질 누출 시 대피 속도 차이에 따른 고령자의 상대적 위험도 산정 (Estimation of the Relative Risk of the Elderly with Different Evacuation Velocity in a Toxic Gas Leakage Accident)

  • 이학태;곽종범;박제혁;류지성;이진선;정승호
    • 한국안전학회지
    • /
    • 제34권6호
    • /
    • pp.13-21
    • /
    • 2019
  • Leakage accidents in businesses dealing with hazardous chemicals can have a great impact on the workers inside the workplace, as well as residents outside the workplace. In fact, there were cases where hazardous chemicals leaked from many businesses. As a result, the Chemicals Control Act(CCA) was enacted in 2015, the Ministry of Environment introduced an Off-site Risk Assessment(ORA). The purpose of the ORA is to secure safety from the installation of the design of the workplace facilities so that chemical accidents of hazardous chemical handling facilities do not cause human or physical damage outside the workplace. In general, the ORA qualitatively determines where a protected facility is within the scope of the accident scenario. However, elderly who belong to the sensitive group is more sensitive than the general group under the same chemical accident effect, and the extent of the damage is serious. According to data from the Korea National Statistic Office, the number of elderly people is expected to increase steadily. Therefore, a quantitative risk analysis considering the elderly is necessary as a result of a chemical accident. In this study, accident scenarios for 14 locations were set up to perform emergency evacuation due to toxic gas leakage of Cl2(Chlorine) and HF(Hydrogen Fluoride), and the effects of exposure were analyzed based on the evacuation velocity difference of age 20s and 60s. The ALOHA(Areal Locations of Hazardous Atmospheres) program was used to calculate the concentration for assessing the effects. The time of exposure to toxic gas was calculated based on the time it took for the evacuation to run from the start point to the desired point and a methodology was devised that could be applied to the risk calculation. As a result of the study, the relative risk of the elderly, the sensitive group, needs to be determined.

차량과속방지턱의 설치기준 개발에 관한 연구 (Development of Guidelines for Installing Speed Control Humps)

  • 문무창;장명순
    • 대한교통학회지
    • /
    • 제12권1호
    • /
    • pp.137-149
    • /
    • 1994
  • The objective of study is to evaluate the effect of speed control hump on traffic operation and accidents. Three sites were investigated for the change of traffic accidents before and after the hump installation. Vehicle speeds approaching the hump were also analyzed. The study revealed that not only the number of traffic accidents but also the accident severity were significantly reduced by the installation of hump. Further, different types of traffic accidents with lower severity were observed after the hump installation. For the effect of speed reduction by hump, it was found that the speeds observed at 15m upstream of hump were in the range of 36~50 percent of approaching speeds which were not affected by (ie, without) the hump. Economic analysis of hump installation showed the benefit-cost ratio of 4.3 and 11.2 at two sites. Further analysis revealed that the benefit by the accident reduction exceeds the cost by speed reduction and installation capital if AADT is below 43,150 vehicles on two lane highways. It is recommended from the study that humps should be considered on two lane highways of high accident locations for excessive speeds to reduce traffic accidents and severity.

  • PDF

항공사진 촬영 왜곡보정기술 개발 및 적용 사례 - Photoshop과 PC-Rect 적용 중심 (Development and Application of Aerial Photographing Distortion Correction Technology - Focused on Photoshop and PC-Rect)

  • 박명철;박종찬;윤용문;김송희
    • 한국안전학회지
    • /
    • 제32권4호
    • /
    • pp.100-106
    • /
    • 2017
  • Outline map is used for the description and reconstruction of the traffic accident. One way to produce the outline map is by adopting detailed measurements from the accident site such as final position of the vehicle and pedestrian, width of the road, and locations of the oil and tire marks. This method consumes large amount of time not to mention that of the production of detailed version as fine as the picture of the site. Aerial recording equipment so called HeliCam can produce an outline map that can substitute that of manual method with even faster production time and higher resolution. However, the produced picture have errors which are resulted by distortion due to the characteristics of camera and direction of the photographing. This paper provides correction of the distortion of oultline map produced by HeliCam using Adobe Photoshop and PC-Rect. The result showed resonable error range less than 6 cm(0.1%) for $60m{\times}30m$ area taken by HeliCam. The presented method develops outline map with small error, which is useful to traffic accident analysis, and traffic accident cases analyzed in this study were also.

Mid-Block상의 버스정류장과 횡단보도 이격거리를 고려한 버스정류장 배치형태 기준 연구 (A Guideline for the Location of Bus Stop Type considering the Interval Distance of Bus Stops and Crosswalks at Mid-Block)

  • 이수범;강태욱;강동수;김장욱
    • 대한교통학회지
    • /
    • 제28권2호
    • /
    • pp.123-133
    • /
    • 2010
  • 현재 국내의 횡단보도 설치 관련 기준은 육교 지하차도 및 다른 횡단보도로부터 200m 이내는 중복설치를 금하고 있다. 만약 횡단보도를 설치하고자 할 때는 지방경찰청장이 타당성을 검토하여 설치하도록 규정하고 있으나, 횡단보도의 설치형태와 세부기준은 미흡한 실정이다. 본 연구에서는 Mid-Block상의 버스정류장 배치형태(접근부, 유출부)에 따른 각각의 사고예측모형을 개발하였으며, 사고건수와 사고심각도를 종속변수, 버스정류장과 횡단보도 이격거리, 교통량, 보행량을 독립변수로 하는 포아송 회귀모형식을 개발하였다. 유출부모형의 경우 연간 교통사고 심각도는 버스정류장과 횡단보도간의 이격거리, 교통량, 보행량의 증가에 따라 사고와 양(+)의 관계로 증가하고, 접근부 모형의 경우는 교통량, 보행량의 증가에 따라 사고와 양(+)의 관계로 증가하지만 버스정류장과 횡단보도간의 이격거리는 음(-)의 관계로 분석되었다. 따라서, 교통사고를 최소화할 수 있는 버스정류장과 횡단보도 이격거리는 횡단보도 접근형과 유출형의 혼합형인 횡단보도의 경우는 이격거리 65m일 때 최적의 배치형태로 분석되었으며, 유출부와 접근부 사고 모형식을 통해서 얻은 최적 이격거리가 60m~70m로 나타났다.

대형 교통사고 발생지점 유형화와 영향요인 분석에 따른 교통안전대책 방안에 관한 연구 (Traffic Safety Countermeasures According to the Accident Area Patterns and Impact Factor Analysis of the Large-scale Traffic Accident Locations)

  • 김봉기;정헌영;고상선
    • 대한교통학회지
    • /
    • 제24권1호
    • /
    • pp.39-52
    • /
    • 2006
  • 본 연구는 대형 교통사고의 발생지점들을 특성별로 유형화하기 위하여 군집분석(Cluster hnalysis)을 행하고, 아울러 충돌 형태에 미치는 영향요인에 대한 영향 정도를 판별할 수 있도록 하기 위하여 수량화 이론 II류(Quantification II)와 C&RT(Classification and Regression Trees) 방법에 의해 분석을 실시하여 이에 대한 적합성을 평가함으로써, 정량적 척도의 간략화를 도모하고자 하였다. 그 결과, 발생 지점별 유형화에 따른 4개 집단의 판별 및 분류분석의 충돌 형태별 제반 영향요인들 특성은 집단별로 명확한 차이를 보이는 것으로 나타나, 교통사고에 대해 우선 시행되어져야 할 대책과 보완 대책들을 집단별로 체계적으로 제시할 수 있었다. 하지만 상당수 변수들에 결측치가 많아, 막대한 정보 손실이 초래되어 보다 심층적인 분석을 하기 어려웠는바, 이러한 문제점을 해결하기 위해서는 대형 교통사고 조사. 분석 시 표준화된 원 자료 시트의 작성을 의무화할 필요가 있는 것으로 나타났다.

GIS 공간 분석기법을 활용한 위험물질별 철도사고 피해규모 자동추출방안에 관한 연구 (A Method to Measure Damage Areas on Railway Accidents by the HAZMATs types using GIS Spatial Analysis)

  • 박민규;김시곤;이원태
    • 대한안전경영과학회지
    • /
    • 제12권1호
    • /
    • pp.35-42
    • /
    • 2010
  • Due to the industrialization and urbanization, the transport of hazardous materials increases, which rises possibilities in occurring prospective accidents in terms of hazardous material transport as well. This study applied the model developed from the previous research to analyze the scale of damage areas from the accidents related to hazardous material accidents, as well as suggested a method to measure automatically the scale of accident including casualties and environmental damage based on the guideline which suggests the quantities of hazardous materials exposed from an accident and was defined in the study of standardization for hazardous material classification. A buffering analysis technique of Geographic Information System (GIS) was applied for that. To apply the model which evaluates the scale of population and exposure to environment on each link, rail network, zones, rail accident data, rail freight trips, and locations of rivers etc were complied as a database for GIS analysis. In conclusion, a method to measure damage areas by the types of hazardous materials was introduced using a Clip and a Special Join technique for overlay analysis.