• 동력기계공학회지
• /
• 제13권5호
• /
• pp.76-81
• /
• 2009

The fatalities of pedestrian account for about 21.2% of all fatalities at 2007 year in Korea. To reconstruct exactly the accident, it is important to calculate the throw distance of pedestrian in car to pedestrian accident. The frontal shape of SUV vehicle is dissimilar to passenger car and bus, so the trajectory and throw distance of pedestrian by SUV vehicle is not the same of passenger car and bus. The influencing on it can be classified into the factors of vehicle and pedestrian, and road factor. It was analyzed by PC-CRASH for simulation, and SPSS s/w was used for regression analysis. From the simulation results, the maximum impact energy of multi-body of pedestrian was occurred to that of torso body at the same time. And the throw distance increased with the increasing of impact velocity, and decreased with the increasing of impact offset. Also it decreased with the increasing of velocity of pedestrian at accident, and the throw distance of wet road was longer than that of dry road. Finally, the regression analysis model of SUV(Nissan Pathfinder type)vehicle in car to pedestrian accident was as follows; $$disti_i=-0.87-0.11offseti_i+0.69speed_i-4.27height_i+0.004walk_i+0.63wet_i+{\epsilon}_i$$.

• 대한교통학회지
• /
• 제25권4호
• /
• pp.69-77
• /
• 2007

본 연구에서는 보행자-차량 충돌사고 분석을 위한 국내외 사고재현모형을 비교하였다. 충돌 후 보행자의 전도거리를 종속변수로, 차량의 충돌속도를 독립변수로 하는 모형을 비교하였으며, 수집된 총 432건의 사고 자료 중 신뢰성 있는 전도거리와 충돌속도 자료의 확보가 가능한 49건을 선정하여 절대평균백분위오차를 산출 후 비교하였다. 또한 전도거리에 영향을 새로운 변수의 도출을 위해 차량의 전면부 형상을 조사하고 이를 변수화하여 모형 구축에 반영하였다. 분석결과 차량의 범퍼높이가 다른 변수에 비해 전도거리에 큰 영향을 미치는 것으로 나타났다. 향후 연구에서는 보다 폭넓고 많은 데이터 수집 및 분석을 통하여 신뢰성을 높은 모형개발이 이루어져야 할 것이다.

• 한국도로학회논문집
• /
• 제17권3호
• /
• pp.107-115
• /
• 2015

PURPOSES : The purposes of this study are to compare the day and night characteristics and to develop the models of traffic accidents. in Rural Signalized Intersections METHODS : To develop day and night traffic accident models using the Negative Binomial Model, which was constructed for 156 signalized intersections of rural areas, through field investigations and casualty data from the National Police Agency. RESULTS : Among a total of 17 variances, the daytime traffic accident estimate models identified a total of 9 influence factors of traffic accidents. In the case of nighttime traffic accident models, 11 influence factors of traffic accidents were identified. CONCLUSIONS : By comparing the two models, it was determined that the number of main roads was an independent factor for daytime accidents. For nighttime accidents, several factors were independently involved, including the number of entrances to sub-roads, whether left turn lanes existed in major roads, the distances of pedestrian crossings to main roads and sub-roads, lighting facilities, and others. It was apparent that if the same situation arises, the probability of an accident occurring at night is higher than during the day because the speed of travel through intersections in rural areas is somewhat higher at night than during the day.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.8-14
• /
• 2011

The live-line works are very dangerous because of direct contacts with the distribution line or neighboring contacts. So the purpose of this study is to identify the risk factor by accident occurrence form and accident case analysis, and to suggest the quantified risk index by risk occurrence frequency and risk strength analysis. And the risk index assessment is researched by accident cases analysis on work type. Accident cases of transmission distribution line are researched based on data of the Ministry of Employment and Labor in the last ten-year period (2000~2009). In results of this paper, high risk isn't always a priority of safety measures. Risk occurrence frequency and risk strength have to be considered according to detail work types, work methods and conditions of field work. And safety management measures must be planned according to risk occurrence frequency and risk strength.

• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.1-11
• /
• 2015

The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. Thus, we consider several factors to build the safety estimation model to meet fairness and rationality. This paper present the yearly statistic data of accident from KOSHA analyze the data by industry, scale, year of service of a employee, age and other factors; build the safety estimation model for the business based on the accident report derived the analysis. The estimation model is established by the weights for accident type, degree, scale, industry, year of service, and age of the employee derived from ANP(Analytic Network Process).

• 한국안전학회지
• /
• 제15권1호
• /
• pp.11-18
• /
• 2000

The study on industrial accidents in Korea has been focused on frequencies of each type, severity, characteristics, causes, and so on. Those attributes of industrial accidents were usually analyzed independently, so that it was hard to provide a systematic guidelines for efficient safety management. Therefore, there were a few of studies based on comprehensive survey results in terms of characteristics of safety management. This study aimed to figure out the characteristics of current safety management and to provide a guideline for ideal safety management in industry. The questionnaire survey carried out for the workers(695) who were in charge of safety management at their industries. The multivariate analyses as well as descriptive statistical analysis were conducted. The factor analysis showed that there were three factors of safety management. They were 1) investment and management for accident prevention, 2) safety manager, and 3) general health and environmental condition. The industries of respondents were clustered into three groups. Three groups showed a statistically significant differences on the number of cases reported and the trends of accident. Actually, the group with the larger investment and better management of accident prevention had a smaller number of accident cases.

• 대한안전경영과학회지
• /
• 제12권2호
• /
• pp.1-7
• /
• 2010

The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. Thus, we consider several factors to build the safety estimation model to meet fairness and rationality. This paper present the yearly statistic data of accident from KOSHA analyze the data by industry, scale, year of service of a employee, age and other factors; build the safety estimation model for the business based on the accident report derived the analysis. The estimation model is established by the weights for accident type, degree, scale, industry, year of service, and age of the employee derived from AHP(Analytic Hierarchy Process).

• 대한교통학회지
• /
• 제23권3호
• /
• pp.125-136
• /
• 2005

현재 도로사업의 타당성 조사 시 사용하는 교통사고 감소편익 산정시 도로등급별로 사고율을 일률적으로 적용하고 있고, 도로특성 및 V/C에 따른 특성이 고려되고 있지 못하고 있다. 이와 같은 문제점을 해결하기 위해 본 논문에서는 도로유형별 V/C 및 교통 특성을 반영하여 사고를 예측할 수 있는 모형을 개발하여 도로의 신설 및 개량에서 그 도로의 안전성을 평가할 수 있는 방법론을 제시하였다. 본 연구에서는 초기 단계로서 도시지역 도로를 대상으로 하여 모형을 개발하였다. 우선 도로유형별로 사고에 영향을 미치는 요인을 선정하였다. 이 때 선정 기준은 도로설계단계에서 획득할 수 있는 자료를 위주로 선정하였으며. 교통량, 중앙분리대의 유 무, 교차점수. 연결로수, 횡단신호등수 그리고 차로수를 선정하였다. 각 요인과 사고와의 관계를 분석해 본 결과 모두 통계적으로 유의한 수준에서 상관성이 있는 것으로 나타났다. 본 연구에서는 도로의 등급 및 V/C에 따라 4가지 유형으로 분류하고, 각각에 대하여 포아송 선형회귀식을 통하여 사고예측모형을 도출하였으며, 실제 자료를 이용하여 검증하였다. 검증결과 모형식의 결과가 실제 사고 자료에 대해 비교적 양호하게 추정력을 보이는 것으로 나타났다. 본 연구에서는 V/C에 따른 도로유형별 사고예측모형을 개발함으로써 도로의 물리적인 특성으로 인한 교통사고예측이 가능하고, 이 결과를 도로의 신설 및 개량에 대한 타당성 조사시 사고비용을 추정하는데 활용할 수 있을 것이라 판단된다. 본 연구에서 이용한 자료가 전라북도 한 지역으로 한정되어있어 전국적인 대표성을 지니는 데에는 한계가 있을 수 있다는 사실을 밝히고자한다.

• 수산해양기술연구
• /
• 제56권2호
• /
• pp.155-162
• /
• 2020

The adjudication of Korean Maritime Safety Tribunal (KMST) was analyzed to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) in stow net fishing vessel from 2015 to 2019. The personnel's carelessness was the most common in 29 out of 33 accidents (87.9%), followed by 25 cases (75.8%) of inadequacy of instructions, 24 cases (72.7%) of inadequacy of education on hazard factor, 20 cases (60.6%) of no personal protection equipment, 18 cases (54.5%) of poor guard, 17 cases (51.5%) of inadequacy of work method, 16 cases (48.5%) of absence of emergency stop button, 14 cases (42.4%) of work practice of poor safety precautions that affected more than 40% of all accidents as accident causes. These causes had a strong influence on each other, and the ratio of accident causes is high. With this relationship, accidents can be prevented or the severity of human injury can be reduced if types of accident process can be estimated with a scenario, and the key points before the accident in the scenario are switched to safe points.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.140-143
• /
• 2018

Background: The Occupational Safety and Health Monitoring and Assessment Tool (OSH-MAT) is a practical instrument that is currently used in the German woodworking and metalworking industries to monitor safety conditions at workplaces. The 12-item scoring system has three subscales rating technical, organizational, and personnel-related conditions in a company. Each item has a rating value ranging from 1 to 9, with higher values indicating higher standard of safety conditions. Methods: The reliability of this instrument was evaluated in a cross-sectional survey among 128 companies and its validity among 30,514 companies. The inter-rater reliability of the instrument was examined independently and simultaneously by two well-trained safety engineers. Agreement between the double ratings was quantified by the intraclass correlation coefficient and absolute agreement of the rating values. The content validity of the OSH-MAT was evaluated by quantifying the association between OSH-MAT values and 5-year average injury rates by Poisson regression analysis adjusted for the size of the companies and industrial sectors. The construct validity of OSH-MAT was examined by principle component factor analysis. Results: Our analysis indicated good to very good inter-rater reliability (intraclass correlation coefficient = 0.64-0.74) of OSH-MAT values with an absolute agreement of between 72% and 81%. Factor analysis identified three component subscales that met exactly the structure theory of this instrument. The Poisson regression analysis demonstrated a statistically significant exposure-response relationship between OSH-MAT values and the 5-year average injury rates. Conclusion: These analyses indicate that OSH-MAT is a valid and reliable instrument that can be used effectively to monitor safety conditions at workplaces.