• Nuclear Engineering and Technology
• /
• 제50권4호
• /
• pp.582-588
• /
• 2018

Accident diagnosis is one of the complex tasks for nuclear power plant (NPP) operators. In abnormal or emergency situations, the diagnostic activity of the NPP states is burdensome though necessary. Numerous computer-based methods and operator support systems have been suggested to address this problem. Among them, the recurrent neural network (RNN) has performed well at analyzing time series data. This study proposes an algorithm for accident diagnosis using long short-term memory (LSTM), which is a kind of RNN, which improves the limitation for time reflection. The algorithm consists of preprocessing, the LSTM network, and postprocessing. In the LSTM-based algorithm, preprocessed input variables are calculated to output the accident diagnosis results. The outputs are also postprocessed using softmax to determine the ranking of accident diagnosis results with probabilities. This algorithm was trained using a compact nuclear simulator for several accidents: a loss of coolant accident, a steam generator tube rupture, and a main steam line break. The trained algorithm was also tested to demonstrate the feasibility of diagnosing NPP accidents.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.814-826
• /
• 2023

Sensor faults in nuclear power plant instrumentation have the potential to spread negative effects from wrong signals that can cause an accident misdiagnosis by plant operators. To detect sensor faults and make accurate accident diagnoses, prior studies have developed a supervised learning-based sensor fault detection model and an accident diagnosis model with faulty sensor isolation. Even though the developed neural network models demonstrated satisfactory performance, their diagnosis performance should be reevaluated considering real-time connection. When operating in real-time, the diagnosis model is expected to indiscriminately accept fault data before receiving delayed fault information transferred from the previous fault detection model. The uncertainty of neural networks can also have a significant impact following the sensor fault features. In the present work, a pilot study was conducted to connect two models and observe actual outcomes from a real-time application with an integrated system. While the initial results showed an overall successful diagnosis, some issues were observed. To recover the diagnosis performance degradations, additive logics were applied to minimize the diagnosis failures that were not observed in the previous validations of the separate models. The results of a case study were then analyzed in terms of the real-time diagnosis outputs that plant operators would actually face in an emergency situation.

• 한국산업정보학회논문지
• /
• 제27권6호
• /
• pp.95-103
• /
• 2022

원자력발전소의 중대사고 발생 시 신속하고 정확하게 사고 상황을 파악해야 하며, 이러한 사고진단 정보를 획득했을 때 적절한 사고관리 및 대응을 수행할 수 있다. 본 연구에서는 국가원자력 재난관리 시스템인 AtomCARE (Computerized technical Advisory system for a Radiological Emergency)로 전송되는 주요 발전소 정보로부터 중대사고 상황을 진단하는데 있어 딥러닝 기술의 접목을 고려하였다. 이를 위하여 주요 시나리오를 선정하고 사고 진행에 따른 상세 시나리오에 대하여 중대사고 해석 코드인 MAAP5 다량 계산을 통한 학습 DB를 구축하였다. 그리고 이 DB의 학습을 통하여 주요 발전소 정보로부터 중대사고 상세 시나리오를 분류할 수 있는, 즉 중대사고 상황을 진단할 수 있는 기술을 개발하였다. 또한 블라인드 테스트와 주성분분석을 통한 검증을 수행하였다. 본 연구에서 개발한 기술은 향후 전체 중대사고 시나리오로 확장 및 적용 가능할 것으로 판단되며 신속하고 정확한 사고진단의 기반기술로 활용 가치가 높을 것으로 기대된다.

• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.91-97
• /
• 2009

전력케이블 사고 발생시에는 사고원인을 규명 해야하며, 본 연구에서는 FMEA 방법을 이용하여 케이블 사고에 대한 자가원인 진단 시스템을 구축하였다. 자가원인 진단 시스템은 사고당시의 데이터 입력, 픽토그래프를 통한 사고형태의 표현, FMEA 방식을 적용한 사고확률 값으로 구성되어 있으며, 각 선택에 따라 사고원인에 대한 사고가능성이 결과로 나타나게 된다. 또한 실제 케이블 사고사례의 원인분석을 통해 자가원인 진단 시스템을 검증한 결과, 이 시스템은 실제 분석결과와 잘 일치되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.248-250
• /
• 2003

Recently, electric power system's situation grows gradually so Fault Diagnosis is being complicated and is felt difficult. And ability that operator who is using electric power system must do correct judgment of power system state, and can cope at fault of power system state is required. Therefore, large size power system is divided into predefined minimum module, and define each module accident type. We use and compare defined accident type, we can know easily accident that happen forward. Therefore, large size power system using module that is defined to each section common accident type search in this paper. Therefore, large size power system using module that is defined to each section, we search for common accident type. And when accident in electric power system happens, I wish to explain about process that can do fault diagnosis in more easy and fast time, because using accident type that it is verified in front.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.493-505
• /
• 2023

Comprehensive condition monitoring of large industry systems such as nuclear power plants (NPPs) is essential for safety and maintenance. In this study, we developed novel system-scale diagnostic technology based on deep-learning and IR thermography that can efficiently and cost-effectively classify system conditions using compact Raspberry Pi and IR sensors. This diagnostic technology can identify the presence of an abnormality or accident in whole system, and when an accident occurs, the type of accident and the location of the abnormality can be identified in real-time. For technology development, the experiment for the thermal image measurement and performance validation of major components at each accident condition of NPPs was conducted using a thermal-hydraulic integral effect test facility with compact infrared sensor modules. These thermal images were used for training of deep-learning model, convolutional neural networks (CNN), which is effective for image processing. As a result, a proposed novel diagnostic was developed that can perform diagnosis of components, whole system and accident classification using thermal images. The optimal model was derived based on the modern CNN model and performed prompt and accurate condition monitoring of component and whole system diagnosis, and accident classification. This diagnostic technology is expected to be applied to comprehensive condition monitoring of nuclear power plants for safety.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3256-3263
• /
• 2021

The main steam line break accident is an essential initiating event of the pressurized water reactor. In present work, the fuzzy set theory and the signal-based fault detection method has been used to detect the occurrence and diagnosis of the location and break area for the small scale MSLB. The models are validated by the AP1000 accident simulator based on MAAP5. From the test results it can be seen that the proposed approach has a rapid and proper response on accident detection and location diagnosis. The method proposed to evaluate the break area shows good performances for small scale MSLB with the relative deviation within ±3%.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.59-62
• /
• 2009

When happen the electrical facilities accident the one's diagnosis system of fault cause was constructed by FMEA method Cable accident cause is given by accident cause that can happen in each one's diagnosis and accident probability value. From the verification of system, the one's diagnosis system agreed well with result that analyzed actual state. Thus, the system is judged to be used effectively examine for accident cause of electrical facilities.

• 한국안전학회지
• /
• 제10권3호
• /
• pp.110-114
• /
• 1995

Bacause of increasing the use in Industrial robots, the accident rate has been increasing now a days. The prediction of accident could be very hard as there are so many factors which occured accident. Removing the accident factors in industrial robots can be diagnosed by the human experts who are very familiar with in those area. The purpose of this study is a development of finger fault diagnosis system for industrial robots. We have many problems such as a long time to get the expert knowledge and the number of expert to be limited. To solve these problems lots of investment and time are required, and then the exepert system to finger fault diagnosis for industrial robots can be applied.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2859-2870
• /
• 2022

Because nuclear power plants (NPPs) are safety-critical infrastructure, it is essential to increase their safety and minimize risk. To reduce human error and support decision-making by operators, several artificial-intelligence-based diagnosis methods have been proposed. However, because of the nature of data-driven methods, conventional artificial intelligence requires large amount of measurement values to train and achieve enough diagnosis resolution. We propose a graph neural network (GNN) based accident diagnosis algorithm to achieve high diagnosis resolution with limited measurements. The proposed algorithm is trained with both the knowledge about physical correlation between components and measurement values. To validate the proposed methodology has a sufficiently high diagnostic resolution with limited measurement values, the diagnosis of multiple accidents was performed with limited measurement values and also, the performance was compared with convolution neural network (CNN). In case of the experiment that requires low diagnostic resolution, both CNN and GNN showed good results. However, for the tests that requires high diagnostic resolution, GNN greatly outperformed the CNN.