• Journal of the Korean Society of Safety
• /
• v.37 no.3
• /
• pp.52-59
• /
• 2022

Conventionally, all the unsafe acts by human beings in relation to industrial accidents have been regarded as unintentional human errors. Exceptionally, however, in the cases with fatalities, seriously injured workers, and/or losses that evoked social issues, attention was paid to violating related laws and regulations for finding out some people to be prosecuted and given judicial punishments. As Heinrich stated, injury or loss in an accident is quite a random variable, so it can be unfair to utilize it as a criterion for prosecution or punishment. The present study was conducted to comprehend how categorizing intentional violations in unsafe acts might disrupt conventional conclusions about the industrial accident process. It was also intended to seek out the right direction for countermeasures by examining unsafe acts comprehensively rather than limiting the analysis to human errors only. In an analysis of 150 industrial accident cases that caused fatalities and featured relatively clear accident scenarios, the results showed that only 36.0% (54 cases) of the workers recognized the situation they confronted as risky, out of which 29.6% (16 cases) thought of the risk as trivial. In addition, even when the risks were recognized, most workers attempted to solve the hazardous situations in ways that violated rules or regulations. If analyzed with a focus on human errors, accidents can be attributed to personal deviations. However, if considered with an emphasis on safety rules or regulations, the focus will naturally move to the question of whether the workers intentionally violated them or not. As a consequence, failure of managerial efforts may be highlighted. Therefore, it was concluded that management should consider unsafe acts comprehensively, with violations included in principle, during accident investigations and the development of countermeasures to prevent future accidents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.202-210
• /
• 2019

This paper evaluated the performance of passenger vehicles with an AEB(Autonomous Emergency Braking) for various pedestrian-vehicle collision situations. The experiment was conducted at a speed of 30-60km/h on a 2017 3,000cc vehicle using a range of collision scenarios. The results showed that the test vehicle stopped before crashing a pedestrian dummy under all scenarios at 30km/h. The test vehicle reduced the speed but crashed the pedestrian dummy in all scenarios at 40-60km/h. From the paired t-test, there was a speed difference from the AEB system at a significant level of 0.05. In addition, the percentage of speed reduction was quite different for each scenario tested. It was concluded that the current AEB system can prevent pedestrian collisions at speed of 30km/h, but cannot prevent collisions with pedestrians at speed of 40-60 km/h.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.63-73
• /
• 2019

This study examined the activity of the simulated training scenarios and special rescue crew assuming a chemical accident inside the building. To improve the response ability and safety of rescue personnel in the event of a chemical accident, a total of eight stages of simulated training scenarios were conducted and the activity was measured. As a result of the activity measurement according to the simulation training scenario, the average maximum heart rate of the rescuers was the highest at 177.50 ppm in the 4^th stage, and then 176.67 ppm for the 5^th step, 171.17 ppm for the 2^nd step, 169.33 ppm for the 3^rd step, 162.17 ppm for the 6^th step, 159.58 ppm for the 7^th step, 148.75 ppm for the 8^th step, and 139.33 ppm for the 1^st step. The mean maximum respiratory rate was the highest at 38.17 rpm in the 4^th stage, followed by 37.58 rpm in the 5^th stage, 32.00 rpm in the 6^th stage, 31.58 ppm in the 7^th stage, 31.33 rpm in the 3^rd stage, 31.08 rpm in the 2^nd stage, and 28.00 rpm in the 8^th stage. The 1^st stage was 22.67 rpm. In addition, body water reduction measurements were reduced by up to 0.7 g due to the training intensity.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.33-38
• /
• 2018

Defects in piping caused by corrosion or external impact of underground piping can lead to high risk of rupture of the piping due to high pressure. Flammable gas can be immediately ignited when discharged from piping, causing a jetfire. The damage of the radiant heat not only threatens the health of the workers who work in the industry but also the health of the people living in the neighboring residential areas. It is important to prevent and prepare before an accident occurs. In this study, three types of flammable gas underground piping accident scenarios were investigated, and the ranges of influence were determined using Phast ver7.2. and finally regression models were formulated to predict the ranges using excel and Matlab.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.3
• /
• pp.25-29
• /
• 2015

Research for Vehicle-to-Vehicle communication has been progressed in order to prevent accidents. In this paper, we decided the events that has high frequency accident of between vehicles on the road and we was arranged possible accident scenarios of each event; EEBL, LCW, BSD, FCW, PCW, IMA. When the event occurs between vehicles, we studied how to evaluate whether the information transmitted safely.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.69-74
• /
• 2001

In this study, we analyzed the accident scenarios of chemical plants through the analysis of lots of chemical accidents and using experts knowledge, and looked into the method of prevention and response. Moreover, we developed a systemic and actual Emergency Response Plan Software(ERPS) that could prevent, prepare and respond totally for the chemical industry facilities using the data from the accident effect estimation from the local society and the geographic information of a chemical plant. The ERPS consists of the information for the plant and process, the consequence analysis and the ERPTA(Emergency Response Plan Tree Analysis). In conclusion, the program developed in this study could help effectively all the chemical industry facilities to prevent and respond to possible accidents.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1255-1265
• /
• 2018

The need for a PSA (Probabilistic Safety Assessment) for a multi-unit at a site is growing after the Fukushima accident. Many countries have been studying issues regarding a multi-unit PSA. One of these issues is the problem of many combinations of accident sequences in a multi-unit PSA. This paper deals with the methodology and software to quantify a PSA scenarios for a multi-unit site. Two approaches are developed to quantify a multi-unit PSA. One is to use a minimal cut set approach, and the other is to use a Monte Carlo approach.

• 한국가스학회:학술대회논문집
• /
• 1999.09a
• /
• pp.223-230
• /
• 1999

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.398-404
• /
• 1999

Safety of passengers in the Korean High Speed Train, KHST, was evaluated under the different accident scenarios. Preliminary occupant analysis has been performed based on the TGV-K train seat characteristics. The influence of the vehicle deceleration and passenger type, seating positions, effectiveness of compartmentalization have been evaluated in terms of occupant injury criteria. This study is the final result of the occupant analysis of KHST project at 1st stage 3rd year.

• Nuclear Engineering and Technology
• /
• v.47 no.4
• /
• pp.434-442
• /
• 2015

The advanced passive pressurized water reactor (PWR) is being constructed in China and the passive residual heat removal (PRHR) system was designed to remove the decay heat. During accident scenarios with increase of heat removal from the primary coolant system, the actuation of the PRHR will enhance the cooldown of the primary coolant system. There is a risk of power excursion during the cooldown of the primary coolant system. Therefore, it is necessary to analyze the thermal hydraulic behavior of the reactor coolant system (RCS) at this condition. The advanced passive PWR model, including major components in the RCS, is built by SCDAP/RELAP5 code. The thermal hydraulic behavior of the core is studied for two typical accident sequences with PRHR actuation to investigate the core cooling capability with conservative assumptions, a main steam line break (MSLB) event and inadvertent opening of a steam generator (SG) safety valve event. The results show that the core is ultimately shut down by the boric acid solution delivered by Core Makeup Tank (CMT) injections. The effects of CMT boric acid concentration and the activation delay time on accident consequences are analyzed for MSLB, which shows that there is no consequential damage to the fuel or reactor coolant system in the selected conditions.