1 |
T.L. Schulz, Westinghouse AP1000 advanced passive plant, Nuc. Eng. Des. 236 (2006) 1547-1557.
DOI
|
2 |
Westinghouse Electric Company, AP1000 Design Control Document, Revision19 [R], Westinghouse Electric Co. LLC, 2011.
|
3 |
J. Zou, Q. Li, L.L. Tong, X.W. Cao, Assessment of passive residual heat removal system cooling capacity, Prog. Nucl. Energ. 70 (2014) 159-166.
DOI
|
4 |
G.C. Gose, T.J. Downar, K.O. Ott, Analysis of the reactivity during a pressurized water reactor main-steam-line-break transient, Nucl. Technol. 124 (1998) 284-289.
DOI
|
5 |
D. Liocea, M. Asztalosb, A. Alembertia, L. Baruccaa, M. Frogheria, G. Saiua, AP1000 passive core cooling system preoperational tests procedure definition and simulation by means of Relap5 Mod 3.3 computer code, Nuc. Eng. Des. 250 (2012) 538-547.
DOI
|
6 |
USNRC, Final Safety Evaluation Report Related to Certification of the AP1000 Standard Design. NUREG-1793, Chapter 21: Testing and Computer Code Evaluation, Nuclear Regulatory Commission, 2004.
|
7 |
S.W. Churchill, H.H.S. Chu, Correlating equations for laminar and turbulent free convection from a vertical plate, Int. J. Heat. Mass. Tran. 18 (1975) 1323-1329.
DOI
|
8 |
W.H. McAdams, Heat Transmission, third ed., McGraw-Hill, New York, NY, 1954.
|
9 |
M.M. Shah, Heat Transfer and Fluid Flow Data Books, Genium Publishing, January 1992. Section 507.6 page 7.
|
10 |
S.S. Kutateladze, Boiling heat transfer, Int. J. Heat. Mass. Tran 4 (1961) 31-45.
DOI
|
11 |
F.W. Dittus, L.M.K. Boelter, Heat Transfer in Automobile Radiators of Tubular Type, Univ. California Berkeley, Publ. Eng. 2/13 (1930) 443-461.
|
12 |
W.M. Kays, Numerical solution for laminar flow heat transfer in circular tubes, Trans. ASME 77 (1955) 1265-1274.
|
13 |
F.P. Incropera, D.P. DeWitt, Introduction to Heat Transfer, Second Edition, Jonh Wiley & Sons, New York, NY, 1990.
|
14 |
R.E. Henry, H.K. Fauske, The two-phase critical flow of onecomponent mixtures in nozzles, orifices, and short tubes, ASME. Trans. C. J. Heat. Transf. 93 (1971) 179-187.
DOI
|
15 |
G.E. Wilson, C.D. Fletcher, C.B. Davis, J.D. Burtt, T.J. Boucher, Phenomena Identification and Ranking Tables for Westinghouse AP600 Small Break Loss-of-coolant Accident, Main Steam Line Break, and Steam Generator Tube Rupture Scenarios. NUREG/CR-6541-Rev.2, Nuclear Regulatory Commission, 1997.
|