• Analytical Science and Technology
• /
• v.36 no.3
• /
• pp.128-134
• /
• 2023

Centella asiatica (C. asiatica) extracts, including asiaticoside and madecassoside, are used in ointments to treat the wound and atopic dermatitis due to their antibacterial and skin-regenerating effects in Asia. Therefore, research on the cultivation and extraction efficiency of C. asiatica is being actively conducted to increase commercialization efficiency. In this study, various deep eutectic solvents (DESs) were prepared and used as the extraction solvents according to the mole ratio between the hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD). And then, the extraction yields in distilled water (DW) and methanol (MeOH), commonly used extraction solvents for C. asiatica, were compared and analyzed by HPLC in the optimized operating condition. As a result, a mixture of DW and DES at a ratio of 3:7 showed about 1.4 times higher extraction efficiency than MeOH only. Conversely, the extraction efficiency in a mixture of MeOH and DES at a ratio of 3:7 was about 6 % lower than that in MeOH only.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.633-639
• /
• 2023

We synthesized 2-(10-methyl-10H-phenothiazin-3-yl)-5-phenyl-1,3,4-oxadiazole (MPPO) and 5,5-(10-methyl-10H-phenothiazin-3,7-diyl)-bis-(2-phenyl-1,3,4-oxadiazole) (DPPO). MPPO has both electron-donating and electron-accepting substituents with asymmetric molecular geometry. By incorporating one extra electron-accepting group into MPPO, we created a symmetric molecule, which is DPPO. The optical and electrochemical properties of these compounds were measured. The lowest unoccupied molecular orbital (LUMO) level of DPPO was lower than that of MPPO. The excited-state dipole moment of DPPO, with symmetric geometry, was calculated to be 4.1 Debye, whereas MPPO, with asymmetric geometry, had a value of 7.0 Debye. The charge-carrier mobility of both compounds was similar. We fabricated non-doped organic light-emitting diodes (OLEDs) using D-A type molecules as an emitting layer. The current efficiency of the DPPO-based device was 7.8 cd/A, and the external quantum efficiency was 2.4% at 100 cd/m², demonstrating significantly improved performance compared to the MPPO-based device. The photophysical and electroluminescence (EL) characteristics of the two D-A type molecules showed that molecular symmetry, as well as the lowered LUMO level of DPPO, played critical roles in the enhancement of EL performance.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.4
• /
• pp.249-255
• /
• 2009

The performance of microbial fuel cell (MFC) can be affected by many factors including the rate of organic matter oxidation, the electron transfer to electrode by electrochemical bacteria, proton diffusion, the concentration of electron acceptor, the rate of electron acceptor reduction and internal resistance. the performance of MFC using oxygen as electron acceptor can be influenced by oxygen concentration as limit factors in cathode compartment. Many studies have been performed to enhance electricity production from MFC. The series or parallel stacked MFC connected several MFC units can use to increase voltages and currents produced from MFCs. In this study, a single MFC (S-MFC) and a stacked MFC (ST-MFC) using acetate as electron donor and oxygen as electron acceptor were used to investigate the influence of dissolved oxygen (DO) concentrations in cathode compartment on MFC performance. The power density (W/$m^3$) of S-MFC was in order DO 5 > 3 > 7 > 9 mg/L, the maximum power density (W/$m^3$) of S-MFC was 42 W/$m^3$ at DO 5 mg/L. The power density (W/$m^3$) of ST-MFC was in order DO 5 > 7 > 9 > 3 mg/L and the maximum power density (W/$m^3$) of STMFC was 20 W/$m^3$ at DO 5 mg/L. These results suggest that the DO concentration of cathode chamber should be considered as important limit factor of MFC operation and design for stacked MFC as well as single MFC. The results of ST-MFC operation showed the voltage decrease of some MFC units by salt formation on the surface of anode, resulting in decrease total voltage of ST-MFC. Therefore, connecting MFC units in parallel might be more appropriate way than series connections to enhance power production of stacked MFC.

• Microbiology and Biotechnology Letters
• /
• v.40 no.4
• /
• pp.414-418
• /
• 2012

The quantity of research on microbial fuel cells has been rapidly increasing. Microbial fuel cells are unique in their ability to utilize microorganisms and to generate electricity from sewage, pig excrement, and other wastewaters which include organic matter. This system can directly produce electrical energy without an inefficient energy conversion step. However, with MFCs maximum power production is limited by several factors such as activation losses, ohmic losses, and mass transfer losses in cathodes. Therefore, electron acceptors such as nitrate and ferric ion in the cathodes were utilized to improve the cathode reaction rate because the cathode reaction is very important for electricity production. When 100 mM nitrate as an electron acceptor was fed into cathodes, the current in single-cathode and dual-cathode MFCs was noted as $3.24{\pm}0.06$ mA and $4.41{\pm}0.08$ mA, respectively. These values were similar to when air-saturated water was fed into the cathodes. One hundred mM nitrate as an electron acceptor in the cathode compartments did not affect an increase in current generation. However, when ferric ion was used as an electron acceptor the current increased by $6.90{\pm}0.36$ mA and $6.67{\pm}0.33$ mA, in the single-cathode and dual-cathode microbial fuel cells, respectively. These values, in single-cathode and dual-cathode microbial fuel cells, represent an increase of 67.1% and 17.6%, respectively. Furthermore, when supplied with ferric ion without air, the current was higher than that of only air-saturated water. In this study, we attempted to reveal an inexpensive and readily available electron acceptor which can replace platinum in cathodes to improve current generation by increasing the cathode reaction rate.

• Journal of Photoscience
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2004

Molecular assembling is one of the current interests in the field of bottom-up nanotechnology. Self-assembled monolayers of sulfur-containing molecules or supramolecular assemblies via surface sol-gel processes formed on conductive supports are chemically robust and can be easily fabricated without sophisticated instruments. We have fabricated various types of molecular assemblies consisting of donor-acceptor pairs on the surfaces of gold and indium-tin-oxide electrodes. Build-up of three-dimensional multi structures consisting of thiol dyes and gold nanoparticles also has been successful. These assemblies showed clear photocurrent responses in photoelectro-chemical cells. In this article, we will describe recent progress on photoelectric conversion using molecular assemblies especially focused on our research results.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.59-62
• /
• 2002

In chilling-sensitive plants, the donor side of Photosystem II is inhibited by the chilling treatment in the dark, while the acceptor side of Photosystem I is inhibited by the chilling under the moderate light. Since the addition of inhibitors of electron transfer from Photosystem II protects Photosystem I from chilling induced photoinhibition of Photosystem I, inhibition or down-regulation of Photosystem II activity in vivo may also protect Photosystem I from photoinhibition. It was revealed that dark-chilling pretreatment actually protected Photosystem I from photoinhibition. The results imply that down-regulation of Photosystem II under stress conditions may have a role to protect Photosystem I from photoinhibition.

• Journal of Life Science
• /
• v.10 no.1
• /
• pp.20-23
• /
• 2000

Mono-ADP-ribosylation, catalyzed by ADP-ribosyltransferases, is a post-translational modification of proteins in which the ADP-ribose moiety of NAD is transferred to an acceptor protein. Previously, we have identified and cloned a glycosylphosphatidylinositol-linked ADP-ribosyltransferase (Yac-1) from mouse lymphoma cells. Yac-1 enzyme contains three regions (region I,II,III) similar to those found in several bacterial toxins and vertebrate ADP-ribosyltransferases. Site-directed mutagenesis was performed to verify the role of Glu 233 in region III. Mutants E233Q, E233D and E233A were inactive for ADP-ribosyltransferase activity. Thus Glu 233 in Yac-1 is essential for enzyme activity, suggesting that Glu 233 in Glu-rich motif near the carboxy terminus plays a catalytic role in ADP-ribosyltransferase activity.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.253-259
• /
• 1997

The iron doped GaAs single crystals were grown by liquid phase epitaxial method and its some physical properties were evaluated with a view to investigate the crystal quality and emission property. The isomer shift of 0.303mm/sec is calculated from low-temperature M ssbauer spectroscopy and we know that charge state of iron ion is 3+ in GaAs crystal. In low temperature photoluminescence, the deep emission bands with wide-line width have been observed at 0.99eV and 1.15eV in addition to sharp excitonic peaks. We attributed that these deep emissions are originated from substitutional Fe-acceptor which has charge state of 3+ and 2+, respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2006

We present the structural, magnetic, and electrical properties in the (Al,Mn)N films with various Mn concentrations grown by plasma-enhanced molecular beam epitaxy. X-ray diffraction analyses reveal that the (Al,Mn)N films have the wurtzite structure without secondary phases. All (Al,Mn)N films showed the ferromagnetic ordering. Particularly, ($Al_{1-x}Mn_{x}$)N film with x = 0.028 exhibited the highest magnetic moment per Mn atom at room temperature. Since all the films exhibit the insulating characteristics, the origin of ferromagnetism in (Al,Mn)N might be attributed to either indirect exchange interaction caused by virtual electron excitations from Mn acceptor level to the valence band within the samples or a percolation of bound magnetic polarons arisen from exchange interaction of localized carriers with magnetic impurities in a low carrier density regime.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.1
• /
• pp.12-15
• /
• 2006

We present the structural, magnetic, and electrical properties in the (Al,Mn)N films with various Mn concentrations grown by plasma-enhanced molecular beam epitaxy. X-ray diffraction analyses reveal that the (Al,Mn)N films have the wurtzite structure without secondary phases. All (Al,Mn)N films showed the ferromagnetic ordering. Particularly, ($Al_{1-x}Mn_{x}$)N film with x = 0.028 exhibited the highest magnetic moment per Mn atom at room temperature. Since all the films exhibit the insulating characteristics, the origin of ferromagnetism in (Al,Mn)N might be attributed to either indirect exchange interaction caused by virtual electron excitations from Mn acceptor level to the valence band within the samples or a percolation of bound magnetic polarons arisen from exchange interaction of localized carriers with magnetic impurities in a low carrier density regime.