• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.135-143
• /
• 2008

현행의 도로설계기준에서는 특정 설계속도에 따라 최소기준을 정하여 이를 토대로 설계된 도로가 해당 기준을 만족하면 주행상 안전성을 확보하는 것으로 간주하고, 이에 따라 도로설계 및 교통운영을 시행하고 있다. 그러나 실제 도로를 주행하는 차량의 속도를 조사해보면, 다수의 차량이 설계자의 의도와 다른 속도로 주행하는 것을 볼 수 있고, 이는 도로 이용자의 안전성 문제와 직결된다고 할 수 있다. 특히, 직선부에서 곡선부, 혹은 곡선부에서 직선부로 주행하는 곡선부 변이구간은 이러한 속도의 변동이 가장 심한 구간 중의 하나로 이에 대한 주행 안전성 검토가 절실하다. 따라서 본 연구에서는 첫째, 곡선부 도로 변이구간에서의 주행속도와 주행반경을 고려한 지점별 횡방향 가속도와 횡방향 가속도 변화율을 산정하고, 둘째, 이를 고려한 곡선부 도로 변이구간의 설계안전성을 평가하여 편경사, 곡선반경 등의 선형 설계요소를 검토하였다. 검토결과 현재 고려되어지고 있는 구심가속도는 실제 운전자가 부담해야 하는 구심가속도에 훨씬 못 미치고 있는 실정이며, 설계속도에 따라 구심가속도가 $25.56{\sim}77.78%$ 증가되어 주행안정성에 문제가 발생함을 확인할 수 있었다. 본 연구는 직선-단곡선으로 이어지는 곡선부 변이구간을 대상으로 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.601-606
• /
• 2004

Vibration spectrums of the test loop according to flow conditions were analyzed in order to identify the sources of vibration at peak frequencies. While a flow condition of the sweep test was changed by varying pump rotational speed from 450 rpm to 1500 rpm by the step 150 rpm, midspan acceleration of the test section in width-direction and dynamic pressure perturbation in the test section were measured. Other sources of vibration due to the flow structure interactions, such as acoustic resonance, blade pulsing frequency and bellows wrinkles, were investigated. Pressure perturbation in the section and acoustic resonance due to branch pipe give major effects to the vibration of the test section in high frequency range of 1.5 kHz to 2.8 kHz.

• 제어로봇시스템학회논문지
• /
• 제18권11호
• /
• pp.1065-1071
• /
• 2012

In this paper, we proposed a method for vehicle monitoring with trajectory reconstruction. For safety, it is important to monitor the driving habit of driver. Every year, many accidents occur due to the reckless driving of the driver. Continuous monitoring of the status of commercial vehicles is needed for safety through the entire path from start point to the destination. To monitor the reckless driving, we try to monitor the trajectory of the vehicle by using vehicle's lateral acceleration data. Compared with steering angle and lateral acceleration, these resemble each other. So, we find the relationship of steering angle and acceleration, and find the global direction of vehicle. We find the position of non-GPS section with EKF (External Kalman Filter) and reconstruct the whole trajectory during vehicle driving.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1347-1354
• /
• 2020

To improve the efficiency of MC criticality calculation, an acceleration method of fission source convergence which gives an improved initial fission source is proposed. In this method, the MC global homogenization is carried out to obtain the macroscopic cross section of each material mesh, and then the nonlinear iterative solution of the SP3 equations is used to determine the fission source distribution. The calculated fission source is very close to the real fission source, which describes its space and energy distribution. This method is an automatic computation process and is tested by the C5G7 benchmark, the results show that this acceleration method is helpful to reduce the inactive cycles and overall running time.

• 한국지반공학회논문집
• /
• 제31권9호
• /
• pp.29-38
• /
• 2015

이 연구에서는 열차가 교량 접속부를 통과하면서 발생되는 동적상호작용 문제를 유한요소해석프로그램을 이용하여 검토하였다. 해석대상구간에서의 궤도틀림조건은 부등침하량을 삼각함수를 이용하여 이상화하고, 철도공사 선로 보수기준을 만족하는 최대 궤도틀림 한계치를 해석조건으로 설정하였다. 해석대상이 되는 접속부 구조물의 체결장치 아래 부분은 모두 3차원 입체요소로 모형화하였으며, 해석비용을 줄이기 위하여 1/2 궤도부분만을 모형화하였다. 경계조건은 평면변형률상태에 준하는 것으로 차량-궤도 동적상호작용해석을 수행하였다. 국내 콘크리트궤도용 표준 접속부에서의 궤도틀림에 따른 열차 주행시 동적상호작용해석을 수행하여 윤중감소율과 차체수직진동가속도를 살펴보았으며, 접속부의 시멘트 안정처리골재, 일반골재, 일반토사구간에서의 발생된 최대 Mises응력으로 동적거동을 평가하였다.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.247-255
• /
• 2008

현행 도로설계의 기준이 되는 "도로의 구조 시설 기준에 관한 규칙 해설 및 지침"에서는 설계속도에 따라 도로 선형별 최소 설계기준을 정하고 있으며, 이 기준을 만족시키면 교통안전성 이 확보되는 것으로 규정하고 있다. 이러한 설계기준에 적용되고 있는 개별 설계요소들은 원칙적으로 차량 및 운전자 특성을 감안하여 설치기준이 정립되었으나, 설계요소간의 연관성 또는 일관성에 대한 깊이 있는 연구를 통해 제반 기준이 정립된 것은 아니다. 결과적으로, 현재의 도로설계기준이 개별 설계 요소들의 조합에 의해 결정되는 도로의 안전성, 일관성 문제를 모두 고려하지는 못하였다. 따라서, 본 연구에서는 기존의 설계기준에 내재된 문제점을 인지하고 해결을 위해 우선적으로 3차원 가속도를 고려한 선형 설계방안에 대한 연구를 수행하였으며, 이를 통해 더욱 안전하고 조화로운 도로건설을 유도하고자 한다.

• Investigative Magnetic Resonance Imaging
• /
• 제25권2호
• /
• pp.81-92
• /
• 2021

The role of neuroimaging in patients with acute ischemic stroke has been gradually increasing. The ultimate goal of stroke imaging is to make a streamlined imaging workflow for safe and efficient treatment based on optimized patient selection. In the era of multimodal comprehensive imaging in strokes, imaging based on computed tomography (CT) has been preferred for use in acute ischemic stroke, because, despite the unique strengths of magnetic resonance imaging (MRI), MRI has a longer scan duration than does CT-based imaging. However, recent improvements, such as multicoil technology and novel MRI acceleration techniques, including parallel imaging, simultaneous multi-section imaging, and compressed sensing, highlight the potential of comprehensive MR-based imaging for strokes. In this review, we discuss the role of stroke imaging in acute ischemic stroke management, as well as the strengths and limitations of MR-based imaging. Given these concepts, we review the current MR acceleration techniques that could be applied to stroke imaging and provide an overview of the previous research on each essential sequence: diffusion-weighted imaging, gradient-echo, fluid-attenuated inversion recovery, contrast-enhanced MR angiography, and MR perfusion imaging.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2342-2347
• /
• 2011

This paper introduces the performance test of the prototype vehicle, which will be in operation for Urban Maglev Program. While common trains with steel wheels use rotary induction motors for propulsion, maglev trains gain thrust force from linear induction motors maintaining the constant airgap with levitation electromagnets. Therefore, not only the behavior of the linear induction motor should be well understood, but also the way of propulsion that minimizes its effect on the levitation system should be took into account. Performance test procedures of maglev trains are proposed and carried out, and the characteristics of acceleration and deceleration are verified to agree with the design criteria. Tests are mainly performed on the linear section of the test line, and the driving characteristics on the section with a 6‰ incline are examined additionally. As a result, the performance of the prototype vehicle in the reverse operation can satisfy the requirement about the acceleration and deceleration, 4.0$m/s^2$. And, the design modifications of the commercial vehicle and the performance specifications required on the demonstration line are investigated.

• 한국군사과학기술학회지
• /
• 제22권6호
• /
• pp.763-772
• /
• 2019

There is a need to use sheath flow nozzle to detect bioaerosol such as virus and bacteria due to their characteristics. In order to enhance the detection performance depending on nozzle parameters, numerical analysis was carried out using a commercial code, ANSYS CFX. Eulerian-lagrangian approach method is used in this simulation. Multiphase flow characteristics between primary fluid and solid were considered. The detection performance was evaluated based on the results of flow field in nozzle chamber such as focusing efficiency and swirl strength. In addition, Latin hypercube sampling(LHS) of design of experiment(DOE) was used for generating a near-random sampling. Then, the acceleration section is optimized using response surface method(RSM). Results show that the optimized model achieved a 6.13 % in a focusing efficiency and 11.47 % increase in swirl strength over the reference model.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.255-265
• /
• 2019

In the present study, the effect of opening patterns of a flow control valve on underwater discharge systems using a linear pump was investigated numerically. For that, a improved mathematical model was developed. The improvement is to separate a middle tank from a water cylinder because the cross-section area of the inlet of the middle tank is an important parameter. To validate the improved model, calculation results were compared with a previous study. The results showed that $2^{nd}$ order or more polynomial opening patterns had an advantage over ramp opening patterns. Higher an order of polynomial resulted in wider operating limits. An escape velocity and a maximum acceleration of underwater vehicle were affected by time derivative of the cross-section area of the flow control valve. Besides, as a velocity profile of the vehicle got closer to linearity, the escape velocity got faster and the maximum acceleration got smaller. And velocities of the vehicle and piston had similar variation trend.