• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.343-350
• /
• 2020

This study was intended to use the Inertia Sensor Units(IMU) for the national women's handball team to quantify movements for a total of 16 domestic or international practice games over five months and to identify the efficiency of training and differences in movements by position. A total of 15 players were participated excluding goalkeepers. The results are as follows. Player Load came in order of Wing>Back>Pivot and high in international games. Change of Direction(CoD) were found to have the most Pivot at low intensity, while middle and high intensity were the most in the Back. There have been a lot of low and middle intensity CoD in International games. Low-intensity acceleration(ACC) and deceleration(DEC) were found to have the most Pivot, while middle & high intensity ACC and DEC had the most Back. There have been many low and middle intensity ACC and low, middle and high intensity DEC in international games. There were many middle and high intensity jumps in Back and Wing, but there were no differences in the types of games.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.98-104
• /
• 2012

Current [Guideline for Installation and Management of Sidewalks and Safety Facilities on Roads] suggests that the types of curbs should be Barrier curb ($85^{\circ}$). Although Barrier curbs ($90^{\circ}$) were not specified in the guideline. The curbs installed on the roads currently are Barrier curbs ($90^{\circ}$) which are not specified in the installation standard. Therefore, it is critical to prepare for the installation standard of curbs by researching types of curbs and driving safety. This research have assessed the driving safety throughout Full Scale Crash Test according to type of curbs (Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$)). Barrier curbs ($90^{\circ}$) showed higher figure in Theoretical head Impact Velocity, Post-impact Head Deceleration, Vehicle Damage when Crash, Passenger's Wounds Severity, and every other items than Barrier curbs ($85^{\circ}$). Barrier curbs ($85^{\circ}$) were found to have better Occupant Safety Index. Analysis of Behavior Using Full-Scale Crash Test showed difference depending on the Impact Condition between Barrier curbs ($85^{\circ}$) and Barrier curbs ($90^{\circ}$). Generally, Barrier curbs ($85^{\circ}$) were superior than Barrier curbs ($90^{\circ}$) in terms of protecting the passengers and vehicle damages. When an impact angle increases, Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs, two types of curb showed similarity. However, if an impact of an angle decreases, Barrier Curbs ($85^{\circ}$) showed excellence in Driving Safety such as Acceleration of Vehicle, Variations of Speed, and Contact Relationship between Wheels and Curbs.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.165-177
• /
• 2012

PURPOSES: The number of traffic accidents in 2010 was 226,978 in Korea, a high percentage of which up to 12.61% was due to drunk driving. As it is expected that the number of traffic accidents will increase because of the drastic increase of the number of vehicle registrations and the prevalent drinking cultures, it is necessary to understand the driving characteristics of drunken drivers to lower the increasing rate. METHODS: This study, therefore, comparatively analyzes the two groups - one group before drinking and the other after drinking - based on the graph, and implements the correlation in each scenario(1,2,3). scenario 1. appearance of jaywalkers; scenario 2. appearance of an illegal left-turning car; and scenario 3. appearance of a vehicle and a person as obstacles to the driver after an accident. RESULTS: The comparative analysis of speed shows that the group after drinking was 50km/h faster than the group before drinking in Scenario 1, 20km/h in Scenario 2, and 15km/h in Scenario 3 respectively. In the comparative analysis of acceleration, the average level of the group after drinking was 0.15 higher than that of the group before drinking in Scenario 1, 0.30 in Scenario 2, and 0.15 in Scenario 3. In the comparative analysis of deceleration, the average level of the group after drinking was about 0.4 lower than that of the group before drinking in Scenario 1, 0.35 in Scenario 2, and 0.2 in Scenario 3 respectively. In the comparative analyses, the item of speed, acceleration and deceleration was of significance for each group in Scenarios. CONCLUSIONS: The comparative analysis demonstrated that there is a difference between the group before drinking and the group after drinking. In the analysis of correlation in each group, it was proved that the drunken group was of significance.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.21-32
• /
• 2010

A traffic island, typical channelization facilities, is widely applied to newly road designs and black spots improvement projects as traffic safety measures. However positive effects of a traffic island for traffic safety have not been reported specifically. Accordingly this study analyzed the accidents reduction effectiveness and economics of installing traffic islands under various roadways and traffic conditions. For this purpose normality test, paired t-test and Wilcoxon signed rank test were applied to this study based on traffic accidents, roadways and traffic environments data for 3 years before and after improvement at 54 intersections. The results showed that most of traffic accidents were reduced significantly after installing traffic islands except when traffic islands were installed in outside of cities and farming regions where use efficiency is low, curve sections with poor visibility, poor alignment sections with acceleration/deceleration lanes, road sections where occurs conflicts frequently due to did not install of acceleration/deceleration lanes, and road sections where cross with single lane road.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.537-540
• /
• 1992

This paper presents Samsung CNC (Computer Numerical Controller) system with an intel 80486/487 as the main CPU and a 32 bit floating point DSP(Digital Signal Processor) TMS320C30 as the motion control CPU. The Samsung CNC system diverse user-frienly characteristics such as multi-tasking, powerful menu system, internal PLC system, and 2/3 dimensional graphics in wire and solid mode. The main CPU executes central processing program, user interface program, interpreter, BMI, etc while the motion control CPU carries out some interpolations, acceleration/deceleration, and PID control algorithm with feedforward terms. Complex interpolations except linear and circular ones are performed on the main control CPU. The experimental results for the circular interpolation under linear acceleration/deceleration shows that the proposed CNC system can be widely used in controlling machining centers with good machining accuracy.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.319-326
• /
• 2006

In this paper, a fuzzy inference control system is proposed for a turbojet engine with fuel flow control input only. The proposed control system provides a practical fuel flow control method to prevent surge or flame out during engine acceleration or deceleration. A fuzzy logic is designed to obtain the fast acceleration and deceleration of the engine under the condition that the operating point should stay between the surge line and flame out control line. With using both engine rotating speed error and surge margin as fuzzy input variables, the desired engine rotating speed can be achieved to rapidly follow the engine control line without engine stall. Computer simulation using the MATLAB is realized to prove the proposed control performance to the turbojet engine which is linear modelized using DYGABCD program package.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.109-118
• /
• 2009

The conventional lane changing model has been developed without acceleration or deceleration of vehicles at target lane. Thus, existing lane changing models have limitation to apply in real world. In this paper, lane changing model considered acceleration or deceleration, and calculated the safety distance between subject vehicle and adjacent vehicles for lane changing as well. Simulation was conducted to verify the validity and the efficiency of the developed lane changing model in this paper. Several scenarios were carefully examined by safety distance between subject vehicle and adjacent vehicles. In the result, it was verified that if gap between subject vehicle and adjacent vehicles is larger than safety distance, lane changing behavior between subject vehicle and adjacent vehicles avoids collision. The suggested lane changing model may be applied at the future driver assistance system and advanced safety vehicle.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.690-696
• /
• 2011

A number of conventional railway bridge is more than 2600. Non-ballast plate girder bridge is about 700 and this is 27% of all bridge numbers. Non-ballast plate girder has advantages that self load is more lighter than moving load and construction cost is more inexpensive than concrete bridge. But non-ballast plate girder has disadvantages that vibration and noise is bigger than concrete bridge. This study had analyzed behavior of non-ballast plate girder according to the arrangement of supports and driving conditions to review the proper arrangement of support. Measurements were performed in single line and disel locomotive of 7400type were used as test vehicle. The vehicle's driving conditions are as follows; Change of driving direction, Constant speed driving, Deceleration driving, Acceleration driving. Main measurement contents were horizontal displacement and vertical vibration acceleration in girder of vicinity support. Results of measurement are as follows; In case that a vehicle drives from fixed support to movable support, vertical vibration acceleration of the girder was smaller than opposition case.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1018-1024
• /
• 2011

Liquid sloshing occurs when a partially filled liquid tank is subjected to undesirable external forces or acceleration/deceleration for positioning control. Installation of baffles is still the most popular way to suppress the sloshing, but recent successes of input shaping in reducing structural vibrations may give a possible alternative. We aim at investigating the applicability of input shaping to sloshing suppression by numerically solving fluid motions in a rectangular tank. The tank is partially filled with water and it is suddenly put into a sequence of horizontal motions of acceleration and constant speed. The flow is assumed to be two-dimensional, incompressible, and in viscid, and a VOF two-phase model is used to capture the free surface. Results show that the sloshing can be successfully suppressed by shaping the input, i.e., the velocity or acceleration profile of tank. Three different input shapers (ZII, ZVD, and two-mode convolved ZV shapers) are tested and compared in this study Among them, the convolved ZV shaper shows a best performance to eliminate the sloshing almost completely.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.962-973
• /
• 2017

Concerns about an air pollution are gradually increasing at home and abroad. The automotive and fuel researchers are trying to reduce emissions and greenhouse gases of vehicles through a research on new engine designs and innovative after-treatment systems using clean fuels (eco-alternative fuel) and fuel quality improvements. In this paper, we stduy the emission characteristics of greenhouse gases on seven vehicles using gasoline, diesel, and LPG by legal test mode in domestic and abroad.(Urban mode, Highway mode, rapidly acceleration and deceleration, using air conditioner, low temperature condition) Regardless of fuels, most of the greenhouse gases tend to show the worst results in cold FTP-75 mode. In the case of A vehicles (2.0 MPI) and B vehicles (2.4 GDI) using a gasoline fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. But G vehicles(LPLi) have different emission characteristics from another vehicles. In the case of A vehicles (2.0 w/o DPF) and B vehicles (2.2 with DPF) using a diesel fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. However, the factor of F vehicles are in order of low temperature condition, using air conditioner, rapidly acceleration and deceleration. In conclusion, it will be an effective method to apply different technologies of emission reduction for each fuel.